• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.3
• /
• pp.89-98
• /
• 2008

The vetronics is necessarily required for enhancement of the operational capability and optimization of the system architecture. In this paper, we presents the realtime control methods for the vetronics of the fighting vehicles. We proposed the data distribution based on standard bus and computer resource for realtime and integrated control of the system. Embedded computers are designed considering extensibility and reliability of the system. The integrated display improves the operator's capability. We applied the network centric battle management and digital power control with intelligent switching elements to increase cooperated combat efficiency and reliability. To show the feasibility of the presented design schemes, the vetronics has been implemented and applied to a real fighting vehicle.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.21-30
• /
• 2007

A practical method to design the input shaping which generates control command is proposed in this paper, We suggest an experimental technique considering human operator's target tracking error to improve aiming accuracy which significantly affects hit probability. It is known that stabilization performance is one of the most important factors for ground combat vehicle system. In particular, stabilization error of the manual target tracking system mounted on moving vehicle directly affects hit probability. To reduce this error, we applied input command shaping method using preprocessing filtering and functional curve fitting. First of all, we construct the human operator model to consider effects of human operator on our system. Input shaping curve is divided into several regions to get rid of the above problems and to improve the system performance. At example design part, we chose three steps of functional command curve and determine the parameters of the function by the proposed design method. In order to verify the proposed design method, we carried out the experiments with real plant of a fighting vehicle.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.841-843
• /
• 1999

This paper presents a design of stabilization controller for combat vehicle. A Stabilization system reject disturbances while vehicle moving. The conventional stabilization controller used to constant gain. We can improve the aiming performance by appropriate controller gain. We can find the proper controller gain for road frequencies by evolution strategy(ES). The relationship between the frequencies and proper control gains are generalized by use of the neural network. The road frequency estimated by wavelet transform of disturbance signal. The simulation result show that proposed controller is superior to the conventional stabilization controller.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.3
• /
• pp.293-301
• /
• 2021

LTV(Light Tactical Vehicle) operating in our military requires higher levels of performance and durability to withstand harsher conditions than general vehicles, as they must travel on both rough-train and off-road as well as on public roads. Recently, LTV development is demanded a variety of test evaluations in order to satisfy ROC (Required Operational Capability) by the military requirement. However, there is no informations of driving test course for satisfying the durability performance of Korean tactical vehicle. Therefore, this study aims to provide basic data to establish reliable drive test conditions by analyzing the main maneuvering test site at the domestic and foreign country in order to select the representative drive course. These studies will provide a more scientific and systematic evaluation solution for the development of tactical vehicles, and can be effectively used to establish a certified system for military vehicle test evaluation in the future

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.31-37
• /
• 2007

This paper presents a ballistic lead-computation method which utilizes automatic video tracking, tracking assistance and roll uncoupling. The method is able to improve the firing accuracy of army fighting vehicles such as main battle tanks. In the experiment, the efficiency of the proposed method is evaluated by an error analysis in real operating environment. The proposed method has been applied to the fire control system of a military vehicle and proved through the development test of the vehicle.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.1040-1048
• /
• 2016

Recently, the studies of integrated reliability analysis for combat systems are actively progressing. Especially, the research of integrated reliability analysis is emphasized to overcome limitations of the previous studies. In this paper, we propose a calculation technique for integrated hit probability based on front and side hit probabilities that analyzed in previous studies to improve the time-effectiveness. Also, we find out the integrated reliability of each component based on the integrated hit probability which is calculated, and we propose the method which applied the reliability block diagram technique to analyze the whole combat system of the reliability by function kills. For verifying the proposed method, we applied the proposed method to armored fighting vehicle model. The proposed method considers crew which does not considered the element in the previous study and expects to enhance the accuracy of reliability analysis and the time-effectiveness compared with the previous study.

• Journal of the Korea Society for Simulation
• /
• v.26 no.2
• /
• pp.41-49
• /
• 2017

In the acquisition program, the conceptual design is the most important step toward specifying the military objectives, establishing requirements and determining future developmental directions, of a target system. However, if both the requirements and directions are incorrectly set due to the lack of development experiences and literature backgrounds in the target systems, such as future ground combat vehicles, it may become a major risk in the future design phases and the entire acquisition program. In order to correct these errors in the future phases, time, effort and cost are required. Therefore, it is necessary to reduce the errors that occur in the initial stages to effectively acquire the future ground combat vehicles. This paper describes the initial design method for verifying the requirements and the developmental directions and estimating the system performance at the conceptual design through the system-level physical modeling and simulation (M&S) and the target system performance analysis. The system-level physical M&S use cutting-edge design tools, model-based designs and geometric-based designs. The system performance estimation is driven from the results of the system-level physical M&S and the specialized system analysis software.

• Journal of Internet Computing and Services
• /
• v.25 no.1
• /
• pp.157-166
• /
• 2024

The Army TIGER System, which is being deployed to implement a future combat system, is expected to bring innovative changes to the army's combat methods and comabt execution capability such as mobility, networking and intelligence. To this end, the Army will introduce various systems using drones, robots, unmanned vehicles, AI(Artificial Intelligence), etc. and utilize them in combat. The use of various unmanned vehicles and AI is expected to result in the introduction of equipment with new technologies into the army and an increase in various types of transmitted information, i.e. data. However, currently in the military, there is an acceleration in research and combat experimentations on warfigthing options using Army TIGER forces system for specific functions. On the other hand, the current reality is that research on cyber threats measures targeting information systems related to the increasing number of unmanned systems, data production, and transmission from unmanned systems, as well as the establishment of cloud centers and AI command and control center driven by the new force systems, is not being pursued. Accordingly this paper analyzes the structure and characteristics of the Army TIGER force integration system and makes suggestions for necessity of building, available cyber defense solutions and Army TIGER integrated cyber protections system that can respond to cyber threats in the future.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.54-56
• /
• 2006

To get the robust and reliable input command, we designed shaping function for target tracking system with commander's handle. Input signals of the commander's handle are generated by human operator. It is response of the human to reduce the error between target and gun. But, tracking error while operator aim a moving target manually gives poor system performance. Input noise, particularly, affects hit accuracy as the system performance. We proposed the design method of input command shaping to reduce the Input noise and to improve the operation ability and convenience. We performed the experiments with combat vehicle, example of Target Tracking System, to show the proposed method is efficient and practical.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.34-38
• /
• 2007

There has been skeptical aspects for the robot to be effective in combat fields even though consensus of operational needs and some technological advancements. One of fundamental problems is difficulties in the autonomous technology applicable. This technology is not sufficient to be applied for heavy combat operation, therefore, developer first make open architecture, then, application is implemented on the condition that new functions or technologies will be developed later. It is also required to partition all the functions with common segments which are general to all platforms in order to operate together in the fields and to reduce the load of development to each platform respectively. In addition, common middleware based on the reference architecture is also developed to accommodate new technology evolution. This paper introduces the architecture and middleware applied in XAV(eXperimental Autonomous Vehicle) developed in ADD. In addition, the performance of autonomous navigation and system design characteristics are introduced briefly.