• 한국군사과학기술학회지
• /
• 제24권1호
• /
• pp.31-40
• /
• 2021

The multi-channel video streaming system is an essential device for future ground combat vehicles. For the system, the application of digital interfaces is required instead of the direct analog method to support selectable multiple channels. However, due to the characteristics of the digital interfaces that require en/decoding and signal conversion, the system should support the ability to adapt to quality and delay requirements depending on how video data is utilized. To support addressed issue, this study designs and emulates the multi-channel compressed-video streaming system of ground combat vehicle's fire control system based on commercial standards. Using the system, this study analyzes the quality of video according to the rotational speed of the acquisition device and Glass-to-Glass (G2G) delay between video acquisition and display devices according to video compression rates. Through these experiments and analysis, this paper presents the design direction of the system having scalability on the latest technology while providing high-quality video data streaming flexibly.

• 한국CDE학회논문집
• /
• 제20권3호
• /
• pp.221-229
• /
• 2015

M&S (Modeling & Simulation) based design is widely accepted for the development of the future weapon system with better performance in a cheaper and faster way. Integrated simulation environment (ISE) is needed for the M&S based design. On the ISE, system engineers can not only verify design options but also validate system requirements. In this paper, we propose architectural models of the integrated simulation environment (ISE) which incorporates mission effectiveness M&S (Modeling & Simulation), system performance M&S, the optimization model of integrated performances, digital mockup and virtual prototype. The ISE architectural models may be used to implement the ISE for the development of the future unmanned ground combat vehicle.

• 한국CDE학회논문집
• /
• 제19권4호
• /
• pp.324-331
• /
• 2014

In the design of a combat vehicle, various performances such as firepower, mobility and survivability, etc., should be considered. Furthermore, since these performances relate to each other, design framework which can treat an integrated system should be employed to design the combat vehicle. In this paper, we use empirical interior ballistic and 3D combat vehicle analyses for predicting firepower and mobility performances which are developed in previous study (1) integrated performance modeling. In firepower performance, pitch and roll angle by sequential firing are considered. In mobility performance, vertical acceleration after passing through a bump is regarded. However, since there are many design variables such as mass of vehicle, mass of suspension, spring and damping coefficient of suspension and tire, geometric variables of vehicle, etc., for firepower and mobility performance, we utilize analysis of variance and quality function deployment to reduce the number of design variables. Finally, integrated design optimization is carried out for integrated performance such as firepower and mobility.

• 대한기계학회논문집B
• /
• 제39권1호
• /
• pp.109-113
• /
• 2015

과거의 무기체계는 체계의 목적과 비용 등의 문제로 운용환경에 대한 관심이 부족하여 특히 냉방장치가 탑재되지 않은 체계가 많이 개발되었다. 근래 개발되는 무기체계는 고도의 정밀조준 및 고감도 시스템으로 진화함에 따라 무기체계를 효과적으로 제어하기 위하여 운용자의 운용환경도 중요한 요소로 대두되고 있다. 현재의 무기개발자들은 대부분 통합형 환경제어장치를 장착하도록 설계하고 있다. 본 연구에서는 기 개발된 내부 탄통을 가진 대공포 장갑차에서, 포탑이 회전을 하더라도 효율적으로 차가운 냉기를 전달할 수 있게 하기 위해 드럼바스켓 해석 및 시험을 통해 냉방개선 방안을 도출하고 결과를 실제 장비에 적용하였다.

• 항공우주시스템공학회지
• /
• 제11권6호
• /
• pp.50-55
• /
• 2017

본 논문은 란체스터 방정식을 이용하여 우리의 무인전투기(블루군)과 적 무인전투기(레드군) 간의 교전 결과를 예측하였다. 란체스터 법칙은 군단의 전력이 전투원 수에 비례한다는 제1법칙(linear law)과 전투원 수의 제곱에 비례한다는 제2법칙(square law)가 있다. 제1법칙은 게릴라전에 적합한 법칙이고 제2법칙은 전면전에 적합한 법칙으로 알려져 있으며 일반적으로 제2법칙이 많이 쓰인다. 란체스터의 제2법칙을 이용하여 교전 결과를 예측하였다. 교전에서 승리하기 위한 전투손실률 값은 물론 필요 전력수를 추산하였고, 우리 군의 피해를 1대 미만으로 만들기 위한 전력수도 예측하였다. 적 무인전투기와 아군 무인전투기의 전투 대수가 같을 경우 승리를 보장받으려면 전투손실률이 1:1.5 이상이 되어야 한다.

• 한국전산구조공학회논문집
• /
• 제22권3호
• /
• pp.251-258
• /
• 2009

개념설계단계에서 전투차량은 크게 화력성능, 기동성능과 체계의 물리적 특성으로 나누어진다. 본 연구에서는 전투차량체계를 구성하는 3가지 특성 중 화력성능의 최적화로 제한한다. 체계의 개념설계 단계에서 화력성능에 영향을 미치는 주요 인자로 파괴효과에 직접적인 영향을 주는 탄의 중량과 원거리 사격을 고려한 최대사거리를 분석대상으로 선정하였다. 최대 사거리 분석을 위하여 강내탄도와 강외탄도해석은 질량 집중 모델, Le Duc모델과 질점탄도모델을 사용하여 분석하였다. 실험계획법과 회귀분석으로 반응표면식을 구성하고 선정된 인자를 반응표면법으로 최적화하였다.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.116-122
• /
• 2011

A realtime simulator using an explicit integration method is introduced to improve the solving performance for the dynamic analysis of a wheeled vehicle. Because a full vehicle system has many parts, the development of a numerical technique for multiple d.o.f. and ground contacts has been required to achieve a realtime dynamics analysis. This study proposes an efficient realtime solving technique that considers the wheeled vehicle dynamics behavior with full degrees of freedom and wheel contact with soft ground such as sand or undersea ground. A combat vehicle was developed to verify this method, and its dynamics results are compared with commercial programs using implicit integration methods. The combat vehicle consists of a chassis, double wishbone type front and rear suspension, and drive train. Some cases of vehicle dynamics analysis are carried out to verify the realtime ratio.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.97-102
• /
• 2018

Combat vehicles require high levels of maneuverability, firepower, armor, and operability. A high-performance power system is required for optimal maneuverability. The fuel pump which supplies fuel stably is very important to achieve this. The fuel pump consists of a pump part, a motor part, and a control part. It is equipped with a BLDC motor. Numerous failures of the fuel pump occurred during vehicle operation when exposed to vibration, shock, and high temperature. The cause of failure was confirmed to be stator slip of the BLDC motor. Stator slip is a consequence of the interference loss between the stator and the housing of the motor part in an high temperature environment. The failure of the fuel pump was solved through size control of the motor housing and the stator. We performed vibration testing at high temperature for verification. This study contributes to improving the reliability of combat vehicles.

• 산업경영시스템학회지
• /
• 제44권3호
• /
• pp.64-72
• /
• 2021

Manned-unmanned teaming can be a very promising air-to-air combat tactic since it can maximize the advantage of combining human insight with the robustness of the machine. The rapid advances in artificial intelligence and autonomous control technology will speed up the development of manned-unmanned teaming air-to-air combat system. In this paper, we introduce a manned-unmanned teaming air-to-air combat tactic which is composed of a manned aircraft and an UAV. In this tactic, a manned aircraft equipped with radar is functioning both as a sensor to detect the hostile aircraft and as a controller to direct the UAV to engage the hostile aircraft. The UAV equipped with missiles is functioning as an actor to engage the hostile aircraft. We also developed a combat scenario of executing this tactic where the manned-unmanned teaming is engaging a hostile aircraft. The hostile aircraft is equipped with both missiles and radar. To demonstrate the efficiency of the tactic, we run the simulation of the scenario of the tactic. Using the simulation, we found the optimal formation and maneuver for the manned-unmanned teaming where the manned-unmanned teaming can survive while the hostile aircraft is shot-downed. The result of this study can provide an insight to how manned aircraft can collaborate with UAV to carry out air-to-air combat missions.

• 한국정보통신학회논문지
• /
• 제19권8호
• /
• pp.1973-1980
• /
• 2015

전투 시스템은 목적에 따라 각기 다른 특성을 가지는데, 주요 목적과 관련된 기능을 하는 부품이 다른 기능과 관련된 부품보다 중요하다. 또한 이러한 부품의 피격 확률은 면적에 비례한다고 볼 수 있다. 따라서 부품의 중요도 및 피격 확률을 모두 고려하여 취약성 분석이 이루어져야 하며, 전투 시스템의 설계 단계에서부터 분석된 결과를 반영하여야 신뢰성을 향상시킬 수 있다. 이를 위해 본 논문에서는 관련 연구를 바탕으로 FMECA 기반의 위험도를 적용하고, 전차의 구성 부품별 위험도를 도출하기 위한 방법과 계산 기준을 정의하며, 통합 위험도를 이용한 부품별 취약성 분석 방법을 제안한다. 추가적으로, 제안한 기법을 자동화해주는 위험도 기반의 취약성 분석 프로그램을 개발하고, 그것을 활용하여 제안한 기법의 유용성을 실험한다.