• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.2 s.173
• /
• pp.526-534
• /
• 2000

Near-net-shape forming of zirconia powder was investigated under the combination of cold die and isostatic pressing and pressureless sintering. A novel combination pressing technique, i.e., die com paction under cold isostatic pressing, allowed to produce a complex shaped ceramic powder compact with the controlled dimensions and relatively uniform density distributions. The constitutive models proposed by Kim and co-workers for densification of ceramic powder under cold compaction and high temperature were implemented into a finite element program (ABAQUS). Experimental data for relative density distributions and deformations of zirconia powder compacts produced by cold combination pressing and pressureless sintering were compared with finite element results. Finite element results agreed well with experimental data.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1995.11a
• /
• pp.6-8
• /
• 1995

Among powder metallurgy products, complex shaped parts are difficult to be produced. Even i9f it shall be compacted until pet shape, the parts are easily apt to crack. thus it causes inferior productivity.It is present condition that net ahaped parts are obtained by adding after treatment. Clutch hub, pulley, representative partawifh upper 2 steps, tower 3 steps parts are corresponded to the above case. In recent years. muired parts are get to be thinner and thinner, and therefore extremely high compacting techniaues are required. Definition of most preferable com~actingp arts are I) Uniform density 2) Non crack and 3) Realization of net shape or near net shape productlon. For the above purpose, YOSHIZUKA baa developed n now oreas applying hydraulic servo control system.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.301-310
• /
• 2001

A study for the dangerous properties measurment of dust explosion was attended by the various dust concentration on Anthraquinone, Sodiumbenzoic acid, Corn starch, soy sauce powder, and cheese powder. As the result, maximum explosion pressure, the maximum rate of pressure rise, autoigntion temperature, and the water content of dust on lower limit explosion concentration was obtained as follows 1. The lower limit explosion concentration on soy sauce powder with the humidity of 65 to 90% increased by increasing the con tent of moisture, and the effect of dry air and moisture air decreased better in make of dry air. 2. The effect of a various dust concentration on autoigntion temperatures is investigated, If the vessel of dust explosion is small size and the easiness of autoignition was controled by air within the vessel, because it was better decreased air with increasing of dust concentration 3. The maximum explosion pressures of Anthraguinone, sodiumbenzoic acid, com starch, soy sauce powder, and cheese powder were 1.0g/$\ell$, 1.0g/$\ell$, 1.5g/$\ell$, 1.5g/$\ell$, and 1.5g/$\ell$, respectively, and the maximum rate of pressure rise were 0.5g/$\ell$, 0.5g/$\ell$, 1.0g/$\ell$, 1.0g/$\ell$, and 1.0g/$\ell$, respectively.

• Food Science and Preservation
• /
• v.12 no.2
• /
• pp.151-155
• /
• 2005

General problems on the quality in circulation process of Kochujang are fluidity, separated water at upper layer, and color change to dark-brown. Rice powders, glutinous rice powder and gelatinized rice powder, gelatinized glutinous rice powder were applied for solving such problems to Kochujang. Relationship between blending ratio of com syrup and fluidity had a linear correlation. Water separation in Kochujang was prevented by addition of gelatinized cereal powders, and gelatinized glufinous rice powder was most effective. Optimal amount of gelatinized glutinous rice powder was $0.5\~1.0\%$ (w/w).

• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.281-288
• /
• 2010

Total aflatoxin ($B_1+B_2+G_1+G_2$) maximum levels of 15 ${\mu}g/kg$ ($B_1=10\;{\mu}g/kg$) were set for grain, beans, peanut, nuts & their processed food (grinding, cutting etc.), processed cereal product & processed bean product, confectionaries (peanut or nut-containing food), soybean paste, red pepper paste, dried red pepper, processed com products for popcorn and steamed rice. The maximum levels for aflatoxin $M_1$ are 0.5 ${\mu}g/kg$ for raw milk and milks before manufacturing processing. The patulin maximum level is 50 ${\mu}g/kg$ in apple juice and apple juice concentrate (including concentrate to use as raw material and converted by concentration multiple). The ochratoxin A is managed at the maximum levels of 5 ${\mu}g/kg$ in wheat, barley, rye, coffee beans and roasted coffee, 10 ${\mu}g/kg$ in instant coffee and raisin, 2 ${\mu}g/kg$ in Grape juice, concentrated grape juice as reconstituted and wine. The fumonisins ($B_1+B_2$) maximum levels are 4000 ${\mu}g/kg$ in com, 2000 ${\mu}g/kg$ in com processed food (grinding, cutting etc.) and com powder, 1000 ${\mu}g/kg$ in processed com products. Standards for mycotoxins in food have been established and the mycotoxin risk in food is managed reasonably and scientifically, based on risk assessment and exposure analysis.

• Journal of Dairy Science and Biotechnology
• /
• v.37 no.3
• /
• pp.177-186
• /
• 2019

Raphanus raphanistrum subsp. sativus (radish) powder contains several bioactive com- pounds and is widely used in the food industry. In this study, we examined the sensory attributes (taste, color, flavor, texture, and overall acceptability) of commercially available milk, yoghurt, and kefir containing different concentrations of R. raphanistrum subsp. sativus powder. The organoleptic characteristics of commercially available milk, yoghurt, and kefir was significantly different with respect to taste, flavor, color, texture, and overall acceptability in the treated group (1%, 2%. 3%. and 4%) compared to the control (0%; p<0.05). In addition, the scores of taste, flavor, color, texture, and overall acceptability decreased in proportion to the increase in amount of radish-powder in commercially available milk, yoghurt, and kefir. When 1% R. raphanistrum subsp. sativus powder was added to commercially available milk, yoghurt, and kefir, they showed good results in organoleptic characteristics compared to the control group. Therefore, our results could be used as the basis for estimating changes in organoleptic characteristics on supplementation of various dairy products with R. raphanistrum subsp. sativus.

• Food Science of Animal Resources
• /
• v.26 no.2
• /
• pp.236-240
• /
• 2006

This study was conducted to manufacture new value-added corn dog using potato, milk powder and egg as nutritious and surplus agricultural and livestock products. A typical corn dog was manufactured with corn dog powder, potato, milk powder and egg as the same method of conventional corn dog. Corn dogs were divided into four groups; control group A [conventional corn dog], group B [corn dog manufactured with the fixed content of corn dog powder, milk powder, and egg, potato, water (3: 3: 1: 1: 2)], group C [corn dog manufactured with the fixed content of corn dog powder, milk powder, and egg, potato, water (3: 3: 2: 1: 2)], group D [corn dog manufactured with the fixed content of corn dog powder, milk powder, and egg, potato, water (3: 3: 1: 2: 2)], Viscosity of corn dog batter, pH of corn dog, rheology and sensory evaluation were measured. There were no significant differences for viscosity and pH between original corn dog and manufactured corn dog (p>0.05). However, hardness and brittleness of manufactured corn dog D were superior to the other groups (p<0.05). Also, manufactured corn dog D was superior to the other groups by the results of sensory evaluation. Therefore, these results suggest that it may be possible to manufacture new value-added corn dog which can help to stimulate the consumption of nutritious and surplus agriculture and livestock products.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.6
• /
• pp.746-752
• /
• 2013

An 8-week feeding experiment was conducted to evaluate three types of squid Sepia esculenta liver powder (SLP) as a dietary protein source for replacement of fish meal (FM) in the juvenile black rockfish, Sebastes schlegeli. For replacement of FM, six experimental diets were formulated with 5 or 10% of either of three types (A, B, C) of SLP: SLP-$A_5$, SLP-$A_{10}$, SLP-$B_5$, SLP-$B_{10}$, SLP-$C_5$, and SLP-$C_{10}$. One of the control diets contained 100% FM as the protein source, and the other was a commercial diet (Com). Fish with an average body weight of $6.50{\pm}0.03g$ ($mean{\pm}SD$) were allocated randomly in triplicate groups of 50 to aquaria and fed the experimental diets until satiation. The weight gain (WG) and specific growth rate (SGR) of fish fed the FM, SLP-$A_5$, SLP-$A_{10}$, and SLP-$B_5$ diets were higher than those of fish fed the Com, SLP-$B_{10}$, SLP-$C_5$ and SLP-$C_{10}$ diets. No significant differences were observed in WG and SGR among the diet groups, with the exception of the SLP-$C_{10}$ diet group. The feed efficiency (FE) and protein efficiency ratio (PER) of fish fed the SLP-$A_5$, SLP-$A_{10}$, and SLP-$B_5$ diets did not differ from those fed the control diet. However, fish fed SLP-$B_{10}$ and SLP-$C_{10}$ had lower FE and PER than the fish fed the FM, commercial, SLP-$A_5$, SLP-$A_{10}$, and SLP-$B_5$ diets. Both the SLP-A and SLP-B diets, but not the SLP-C diets, replaced up to 10% and 5% of FM for juvenile black rockfish, respectively. The results of this experiment provide information that will assist in formulating an inexpensive and practical diet containing SLP for juvenile black rockfish.

• Journal of Powder Materials
• /
• v.11 no.6 s.47
• /
• pp.451-461
• /
• 2004

Dry sliding wear behavior of electro-pressure sintered Co-Fe and Co-Ni compacts was investigated. Pin-on-disk wear tests were performed on the sintered Co-Fe, Co-Ni disks against alumina $(Al_2O_3)$ and silica $(SiO_2)$ balls at various loads ranging from 3N to 12N. A constant sliding speed of 0.1m/sec was employed. Wear rate was calculated by dividing the weight loss of a specimen by the measured specific gravity and sliding dis-tance. Worn surfaces and cross-sections of the specimens were examined using an SEM and EDS to investigate wear mechanism of the compacts. The wear behavior of the compacts were discussed as a function of their com-position. Effects of mechancial properties of the compact as well as oxide layers formed on wearing surface on the wear were also discussed.

• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.208-213
• /
• 1994

Wide-band absorbency and small layer thickness are required in the high- performance microwave absorber. In order to reduce the thickness of the absorber, ferrite-iron-rubber composites were proposed and its properties were investigated. The increase in both real part of perrreability and permittivity of the composites were observed with addition of -Fe powder and this behavior results in the decrease of fm dm term. The matching thicknesses of ferrite-iron-ruber composites were relatively small(0.5~2.0 mm) in the frequency range of 3~17 GHz as comIBfed to than that of ferrite-rubbr composit.