• Journal of information and communication convergence engineering
• /
• v.15 no.2
• /
• pp.104-111
• /
• 2017

The visual presentation is one key feature which gives much consideration in designing mobile applications as it acquires attention from the end user. It takes only a few milliseconds to form an impression on a person and this is not any different to the web and mobile application designs. The first few milliseconds are a crucial time for developers as the impression produced would indicate further engagement of the service. Developers should continuously update the designs based on human needs. A few of these contents have actually paved its way to being continuously used. By synthesizing results of preceding researchers, this paper considers layout, color, and font as UI design elements of SNS messenger, and illustration and animation as the graphic image of it. In this study, the preference for messaging application chat layout was being surveyed and analyzed. As a result, there has been little significance identified since the instant messaging, so chat layout shows very minimal variance in their design.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.373-378
• /
• 2007

A micro organism Agrobacterium tumifacient as an immobilized cell on a solid support was presented as a new biosorbent in a simple and sensitive spectrophotometry determination of Ni(II) in various samples using 4-hydroxy benzaldehyde-4-bromophenyl hydrazone as a color developing agent (λmax 497 nm) at pH 4.0 ± 0.2. Beer's law was obeyed over the range of 0.01-0.1 μg L-1. The molar absorptivity and Sandell's sensitivity were 1.285 × 105 L mol-1cm-1 and 0.007245 μg cm-2 respectively. Under these conditions, the preconcentration factor obtained was 82, and the detection limit achieved was 0.05 μg L-1. The detailed study of various interfering ions made the method more sensitive and selective. The recovery of Ni(II) from various samples range from 97.75 to 99.35%. The present method was successfully applied for the determination of Ni(II) in spiked, natural water and alloy samples. The proposed method was compared with reported methods in terms of Student's ‘t'-test and Variance ratio ‘f'-test which indicates that there is no significant difference between proposed and literature method at 95% confidence level.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.625-628
• /
• 2001

In this paper, it is shown that the car number plate are recognized more efficiently by using Fuzzy-ARTM AP. We use the location information of characters in the car number plate area and the color intensity difference between the character region and the background region int the tar number plate area. For segmented plate region, the car plate region is extracted by deciding the X-axis region composed by horizontal histogram and the Y-axis region composed by the variance histogram of vertical histogram. Our method then directly recognizes the extracted character region by using Fuzzy-ARTMAP neural network.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.11a
• /
• pp.273-277
• /
• 1998

The purpose of this study was to develop a large representative data base for jeans marketing strategy. This study was to survey brand awareness and analyze brand image and consumer's seeking image. The 700 questionnaires were distributed and 656 reliable ones were used for statistical analysis. A SAS statistical package including frequency table, factor analysis, analysis of variance, Duncan's multiple range test, Peason's correlation test was used. The results are as follows: 1. Brand awareness involves "brand recall" based on asking a person to name recalled first, and "brand recognition" based on asking to identify brand name from 30 given brands. The result indicated that "Levi" was dominant for brand recall and Guess was dominant for brand recognition. 2. Regarding the brand image, the result showed that "Vov" was best represented for sophisticated 8t trendy brand images, "Storm" for sophisticated brand image, "Jambangee" for reasonable price & comfortable brand images, and "Levis" for classic & design/color brand images. 3. As a result of factor analysis on consumer's seeking image, six factors(characteristic/gay, intelligent/sexy, feminine/sophisticated, active/functional, cute/young, simple/comfortable) were found. Several factors had a relationship with demographic variables, preferred design, fashion interest.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.6
• /
• pp.451-455
• /
• 2014

PURPOSE. The most common failure seen in restorations with a zirconia core is total or layered delamination of the ceramic veneer. In the present study, the shear bond strengths between veneering ceramics and colored zirconia oxide core materials were evaluated. MATERIALS AND METHODS. Zirconia discs ($15{\times}12{\times}1.6mm$) were divided into 11 groups of 12 discs each. Groups were colored according to the Vita Classic scale: A3, B1, C4, D2, and D4. Each group was treated with the recommended shading time for 3 s, or with prolonged shading for 60 s, except for the control group. Samples were veneered with 3 mm thick and 3.5 mm in diameter translucent ceramic and subjected to shear test in a universal testing machine with a crosshead speed of 1 mm/min. One-way analysis of variance (ANOVA) and Tukey's HSD tests were used for comparisons of the groups having the same shading times. A paired t-test was used for groups of the same color (3 s/60 s). RESULTS. Among the 11 groups investigated C4 (3 s) had the highest bond strength with a value of 36.40 MPa, while A3 (3 s) showed the lowest bond strength with a value of 29.47 MPa. CONCLUSION. Coloring procedures can affect zirconia/ceramic bond strength. However, the results also showed that bond strengths of all the investigated groups were clinically acceptable.

• The Research Journal of the Costume Culture
• /
• v.18 no.2
• /
• pp.304-321
• /
• 2010

The purpose of this study was to investigate the sensation seeking tendency and knitwear purchase behaviors of high school girls. The data were obtained from 475 high school girls at 6 high schools located in Daejeon. The method of study is a survey consisted of sensation seeking tendency items, knitwear purchase behavior items and demographic attribution. Data were analyzed by frequency, variance, crosstabs, and correlation analysis using SPSS WIN 17.0 program. The results of study are as follows. First, high school girls generally liked knitwears by reason of comfort and activity. Most girls purchased the knitwears to wear ordinary casual wear(81.5%). They usually thought sweater and cardigan to be representative of knitwears. Also, they mostly purchased the knitwears of simple and active design, achromatic color, 100% cotton, and solid or simple stripe pattern. The design and price were considered as important evaluation criteria in knitwear purchase. The information sources used by them were store display, friends, and internet. Second, the knitwear purchase behaviors of high school girls showed the difference between groups with high- and low-sensation seeking tendency. The most important factor of knitwear purchase was an unique and characteristic design in high group and a simple and active design in low group. In conclusion, high school girls liked knitwears and had different knitwear purchase behaviors according to the sensation seeking tendency.

• Advances in environmental research
• /
• v.2 no.4
• /
• pp.291-308
• /
• 2013

In the present study, an experimental design methodology was used to optimize the adsorptive removal of Basic Yellow 13 (BY13) using Turkish coal powder. A central composite design (CCD) consisting of 31 experiments was employed to evaluate the simple and combined effects of the four independent variables, initial dye concentration (mg/L), adsorbent dosage (g/L), temperature ($^{\circ}C$) and contact time (min) on the color removal (CR) efficiency (%) and optimizing the process response. Analysis of variance (ANOVA) showed a high coefficient of determination value ($R^2=0.947$) and satisfactory prediction of the polynomial regression model was derived. Results indicated that the CR efficiency was not significantly affected by temperature in the range of $12-60^{\circ}C$. While all other variables significantly influenced response. The highest CR (95.14%), estimated by multivariate experimental design, was found at the optimal experimental conditions of initial dye concentration 30 mg/L, adsorbent dosage 1.5 g/L, temperature $25^{\circ}C$ and contact time 10 min.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.2
• /
• pp.50-59
• /
• 1994

This paper presents a speech recognition method utilizing third-order cumulants as a feature vector and a neural network for recognition. The use of higher-order cumulants provides desirable uncoupling between the gaussian noise and speech, which enables us to estimate the coefficients of AR model without bias. Unlike the conventional method using second-order statistics, the proposed one exhibits low bias even in SNR as low as 0 dB at the expense of higher variance. It is confirmed through computer simulation that recognition rate of korean single-vowels with the cumulant-based method is much higher than the results with the conventional method even in low SNR.

• Journal of the Korean Society of Food Culture
• /
• v.36 no.5
• /
• pp.484-491
• /
• 2021

This study investigated the effect of dry heat treatment (DHT) on the physicochemical properties of hard type (HR) and floury type (FR) rice to improve the processing aptitude of rice flour. The rice flour was heated at 130℃ for 0, 2 and 4 hours, and the color value, water absorption index (WAI), water soluble index (WSI), swelling power, solubility, pasting properties, particle shape and the X-ray diffraction were measured. After DHT, the L value of rice flour decreased, and the b value increased. The WAI, WSI, swelling power and solubility of HR and FR increased with the increase of treatment time. The cold viscosity and setback increased, while breakdown decreased. Cracks and lumps formed with fine particles were observed. The X-ray diffraction pattern was A-type, while the diffraction intensity decreased. According to the results of the two-way analysis of variance (ANOVA) test, the hydration and pasting properties were significantly different between HR and FR and were affected by DHT time. The results suggest that the properties of modified rice flour by DHT can be used in the food industry.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.52-72
• /
• 2023

This study examined the effect of Jojoba oil on the protection of virgin black hair and hair damaged by bleaching. Both hair types were treated for 35 days with 100% Jojoba oil or one of two types of hair conditioner, one formulated with 3% of Jojoba oil and the other formulated without Jojoba oil. The effect of protection was examined in terms of the change in the color, tensile stress, weight, and amount of protein leak compared to untreated black hair or bleached hair. The composition of fatty acids in the Jojoba oil was analyzed using the Gas chromatography mass spectrometry. The differences among the three treatments were statistically tested by one-way analysis of variance test and the Duncan post-hoc test at α = .05. The main fatty acid contained in the Jojoba oil was 11-eicosenoic acid (75.14%). Based on the statistical test it was found that 100% Jojoba oil was the most effective in increasing the tensile stress of black hair and the weight of bleached hair after 35 days of treatment.