• Korean journal of food and cookery science
• /
• v.23 no.3 s.99
• /
• pp.346-353
• /
• 2007

The purpose of this study was to find the optimal mixing ratios of Breen tea power and Opuntia ficus indica var. saboten powder for making acorn starch moot The pH, acidity, color values(L-value, redness, and yellowness), texture properties, and sensory characteristics of the acorn starch moot made with varying contents of the additives were measured. The acorn starch mooks were prepared at different ratios using 0.5, 1, 1.5, 2%(w/w) green tea powder and Opuntia ficus indica var. saboten powder, respectively, based on 9% acorn starch. The overall optimal ratios that satisfied all the sensory properties of the acorn starch moot were 1.5% green tea power and 0.5% Opuntia ficus indica var. saboten powder. The results suggest that the use of green tea and Opuntia ficus indica var. saboten is valuable for making acorn starch moot of good quality.

• Food Science of Animal Resources
• /
• v.26 no.4
• /
• pp.431-440
• /
• 2006

This study was carried out to compare of yield, physico-chemical and sensory characteristics for chicken surimi manufactured by alkaline (pH 11) adjustment with different raw materials. Four experimental groups were surimi with chicken breast (T1) and chicken leg (T2) by spent hen, SF-MDCM (T3) and JY-MDCM (T4). Yield was higher in order of T1>T2>T3>T4 (p<0.05). The yield, physico-chemical and sensory characteristics of T1 were significantly higher than those of other treatments. Especially, $L^*$ and W value, shear force, textural properties, folding test, breaking force, gel strength, breaking $force{\times}deformation$, flavor, color and overall acceptability were higher in T1 but ar value, cooking loss, collagen and myoglobin content of T1 were lower than those of other treatments (p<0.05). Deformation, aroma, juiciness, tenderness were higher but met-myoglobin and yield of T4 were lower than those of T2 and T3 (p<0.05). Crude fat cooking loss and met-myoglobin content were higher in T2 but $b^*$ value, brittleness, hardness, gumminess, chewiness, folding test, breaking $force{\times}deformation$ and aroma of T2 were lower than those of other treatments (p<0.05). pH, collagen and moisture content and br value were higher but crude protein, folding test, $L^*$ and W value, cohesiveness, tenderness of T3 were lower than those of other treatmene (p<0.05). Correlation coefficients (r>0.8) between folding test and other items was positive in crude protein $L^*$ value, shear force and cohesiveness but negative in moisture content (p<0.05).

• Korean journal of food and cookery science
• /
• v.30 no.4
• /
• pp.402-411
• /
• 2014

This study investigated the quality characteristics of tea leaf pickle with different pickling solutions. Blanched tea leaf at $100^{\circ}C$ for 3 min was pickled using pickling solutions (mixture of water, soy sauce, sugar and vinegar) with different vinegar contents (10, 20, 30 and 40%, v/v). and stored for 30 days at $4^{\circ}C$. The color values, hardness, pH, total acidity, sensory evaluation, antioxidant compound contents, DPPH radical scavenging and ABTS radical scavenging of the pickled tea leaf during storage were determined. The pH of tea leaf pickles decreased consistently and total acidity was increased during storage. The L-value of tea leaf pickles was decreased and the a-value was increased significantly during storage; however, the b-value had no significant changes (p<0.05). The hardness of the tea leaf pickles decreased consistently during storage. On the sensory evaluation, the highest score of overall acceptance was presented to the tea leaf pickle using a 20% vinegar pickling solution stored for 20 days. The antioxidant compound contents and antioxidant activity consistently decreased during storage; further, the experimental group of vinegar with 20% content tea leaf pickle displayed the lowest antioxidant compound content and antioxidant activity.

• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.320-328
• /
• 2007

This study was conducted to determine the effect of pH adjustment and the addition of cryoprotectants on the quality characteristics of chicken breast surimi. We prepared surimi from Alaska pollack, as a the control, by two time washing times and the addition of cryoprotectants. Different preparations of surimi were manufactured by adjusting to pH 11.0 and the addition of different addition cryoprotectants during frozen storage (T1 : 5% sorbitol and 0.3% polyphosphate, T2: 4% sugar, 5% sorbitol and 0.3% polyphosphate, and T3: 2% salt, 4% sugar, 5% sorbitol and 0.3% polyphosphate). The moisture content was significantly lower in the control and T3 samples. The crude protein content was increased with storage times. The crude protein was higher in the control. The water-holding capacity, myofibrillar protein and shear force were significantly higher in T3 than other surimi samples. All gel characteristics were significantly higher in the control and T3 than other surimi samples. pH 11.0 adjusted chicken breast surimi had greater lightness than the control, and T3 samples had the highest lightness and whiteness. Sensory evaluations were significantly higher in the control and T3 than the other samples. The gel, and physical characteristics and sensory evaluation of T3 were similar to the control. T3 samples had superior color and pH than the control Alaska pollack surimi.

• Food Science of Animal Resources
• /
• v.30 no.5
• /
• pp.833-841
• /
• 2010

This study was conducted to develop patties by substituting a portion of meat by bamboo (Sasa borealis) leaf extract (SBE) and/or cooked rice. Four types of patty were prepared: Control, S, SI, and SII. S was the patty for which 2.5% of meat was substituted with SBE. SI and SII were the patties with 25% or 50%, of meat, respectively, substituted with cooked rice containing SBE. The moisture contents of S, SI, and SII patties were not changed. The compositions of fat, cholesterol, and protein of S, SI, and SII patties were decreased. Cooking loss of weight as well as the diameters of S, SI, and SII patties were decreased. pH was increased in S patty, hardness was reduced in SI and SII patties, and malondialdehyde values were lowered in S, SI, and SII patties, compared to control. The S, SI, and SII patties were evaluated higher for color in sensory tests and preference tests. Through preference tests of burgers with these patties, the overall taste of the SI patty was assessed highly among the 4 patties. Therefore, it may be concluded that developing a patty by substituting a portion of meat with SBE and/or cooked rice may be worthwhile.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.1
• /
• pp.1-11
• /
• 2008

Statement of problem: Over the past decade, increased demand for esthetically pleasing restorations has led to the development of all-ceramic systems. Recent reports suggest that the all-ceramic crowns have excellent physical properties, wear resistance, and color stability. In addition, numerous ceramics have excellent biocompatibility, a natural appearance, and improved physical bonding with resin composite luting agents. However, the brittle nature of ceramics has been a major factor in their restriction for universal usage. Functional occlusal loading can generate stress in the luting agent, and the stress distribution may be affected by the marginal geometry at the finish line. Tooth preparation for fixed prosthodontics requires a decision regarding the marginal configuration. The design dictates the shape and bulk of the all ceramic crowns and influences the fit at the margin. Purpose: The purpose of this study was to evaluate the stress distribution within marginal configurations of all- ceramic crowns (90-degree shoulder, 110-degree shoulder, 135-degree shoulder). Material and methods: The force is applied from a direction of 45 degrees to the vertical tooth axis. Three-dimensional finite element analysis was selected to determine stress levels and distributions. Results and conclusion: The result of stress level for the shoulder marginal configuration was more effective on stress distribution at 135-degree shoulder margin. But the stresses concentrated around at 135-degree shoulder margin. The stress decreased apically at the surface between cements and alumina core, and increased apically at the surface between alumina core and veneering porcelain.

• Culinary science and hospitality research
• /
• v.16 no.3
• /
• pp.268-277
• /
• 2010

Gochujang and red pepper powder are the representative condiments in Korea. This study examines gochujang sauces for tteokbokgi by hot taste degree(4 levels) and then evaluated the quality and sensory characteristics of gochujang sauces to provide the basic information for industrialization of gochujang sauce. Moisture content of gochujang sauce 1 was the highest (53.90%). Moisture content became decreased against hot taste. pH range of gochujang sauce was 5.50~5.84. pH values of sauces increased in accordance with hot taste. In the Brix contents, sauce 3 was the highest(46.73%), but the sauce 1 was a little low. Viscosity of sauce 4 was 237.93 cp and others became decreased in accordance with hot taste. In the lightness(L value), sauce 2 was the highest(24.89). Capsaicin content of sauce 4 was 27.00 mg/100 g while sauce 1 was 22.97 mg/100 g. In sensory evaluation, color of sauce 4 was darkest. In hot taste, sauce 1 was evaluated as less hot while sauce 4 as most hot. Overall acceptability score range of sauce 2, 3, 4 was 4.95~5.50 which was higher than sauce 1. The result of a research conducted to undergraduate students showed that they preferred hot taste gochujang sauce. Consequently, customers should be more satisfied with sauce products they chose when provided with those by hot taste degree. In the future, more studies are required about the degree of hot taste for the successful industrialization and globalization of hot pepper and gochujang.

• Culinary science and hospitality research
• /
• v.20 no.4
• /
• pp.169-182
• /
• 2014

This study investigates the physicochemical quality characteristics of tomato sauce added with different kinds of pimpinella brachycarpa. The results are as follows. The pH of tomato sauce added with freeze-dried pimpinella brachycarpa, in contrast to the tomato sauce with raw pimpinella brachycarpa, decreased as the addition quantity of the sample increased. As for sugar content, PBP0 with Pimpinella brachycarpa contained was shown to be the highest with 10.83. For chromaticity, all values (e.g, L, A and B) of tomato sauce added with pimpinella brachycarpa and with freeze-dried pimpinella brachycarpa decreased showing significant differences among the samples as the addition quantity of the samples increased. With increased addition quantity of the sample with freeze-dried Pimpinella brachycarpa, its water content decreased. PBP4, addition group with 4% of freeze-dried Pimpinella brachycarpa, was shown to be the highest DPPH free radical scavenging activity as 29.58. When adding Pimpinella brachycarpa to tomato sauce, a total number of micro-organisms decreased. In case of adding raw Pimpinella brachycarpa rather than freeze-dried Pimpinella brachycarpa, it created a further effect on an inhibitive action of growing and developing micro-organisms. In the preference of tomato sauce with Pimpinella brachycarpa, PBF2 with 2% of Pimpinella brachycarpa had the highest score as 5.1 for the color. For taste, 3.7, the lowest taste score, was shown in PBF1with 1% of Pimpinella brachycarpa. The overall preference revealed that PBF2 was the highest scoring 5.8.. PBF3 was scored highest with 5.9 for overall preference. From the comprehensive findings, 2~3% of the addition ratio between raw Pimpinella brachycarpa and freeze-dried Pimpinella brachycarpa in the production of tomato sauce is considered the most preferable.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.375-390
• /
• 2009

Statement of problem: Implant supported overdenture is accepted widely as a way to restore edentulous ridge providing better retention and support of dentures. Various types of attachment for overdenture have been developed. Purpose: The purpose of this study was to investigate the influence of attachment type in implant overdentures on the biomechanical stress distribution in the surrounding bone, prosthesis and interface between implant and bone. Material and methods: Finite element analysis method was used. Average CT image of mandibular body(Digital $Korea^{(R)}$, KISTI, Korea) was used to produce a mandibular model. Overdentures were placed instead of mandibular teeth and 2mm of mucosa was inserted between the overdenture and mandible. Two implants($USII^{(R)}$, Osstem, Korea) were placed at both cuspid area and 4 types of overdenture were fabricated ; ball and socket, Locator, magnet and bar type. Load was applied on the from second premolar to second molar tooth area. 6 times of finite element analyses were performed according to the direction of the force $90^{\circ}$, $45^{\circ}$, $0^{\circ}$ and unilateral or bilateral force applied. The stress at interface between implants and bone, and prosthesis and the bone around implants ware compared using von Mises stress. The results were explained with color coded graphs based on the equivalent stress to distinguish the force distribution pattern and the site of maximum stress concentration. Results: Unilateral loading showed that connection area between implant fixture and bar generated maximum stress in bar type overdentures. Bar type produced 100 Mpa which means the most among 4 types of attachments. Bilateral loading, however, showed that bar type was more stable than other implants(magnet, ball and socket). 26 Mpa of bar type was about a half of other types on overdenture under $90^{\circ}$ bilateral loading. Conclusions: In any directions of stress, bar type was proved to be the most vulnerable type in both implants and overdentures. Interface stress did not show any significant difference in stress distribution pattern.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.8
• /
• pp.1242-1248
• /
• 2013

This study was performed to determine the effects of pretreatment (NT: non-treatment, BTS: boiling treatment with 3% sodium chloride, DTG: dipping treatment in glycerol) and drying methods (sun drying, hot air drying, and cold air drying) on the physicochemical properties and antioxidant activities of dried jujube (Zizyphus jujuba Mill.) fruits. Our results show that moisture content is lower (P<0.05) with DTG, and that moisture content is lower with hot air drying compared to other drying methods. The bulk density was highest with BTS. The soluble solids content was highest with DTG. Additionally, the soluble solids content were highest in the following order: hot air drying> cold air drying> sun drying. The titratable acidity of hot air drying was highest of all the drying methods. The titratable acidity was higher with NT and DTG, and the brix and acid ratio of sun drying was higher than other drying methods. Among the drying methods, BTS showed the best browning-retarding effect, whereas boiling treatment affected quality and color. The total polyphenol content from hot air drying and NT or DTG treatment was relatively higher than the content from BTS. The flavonoid content was highest with BTS, and all dried jujube showed relatively high antioxidant activities. The sensory evaluation results indicated that the organoleptic scores for overall preference were higher in the NT and DTG treatment groups. These results suggest that pretreatment and drying methods affect the quality of dried jujube fruit, and show that glycerol treatment with hot air drying can be applied to the production of high quality dried jujube.