• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.277-280
• /
• 2007

A moving object tracking algorithm for image searching based on specific color detection is proposed in this paper. That is preprocessed for a luminance variation and noise cancellation to be robust system. The motion tracking is used the difference between input image and reference image in R, G, B each channels for a moving image. The proposed method is enhanced to 15% fast in comparison with the contour tracking method and the matching method, and stable.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.231-234
• /
• 2007

Advances in white OLED tandem architecture are discussed.With these structures, stable and low-power full color AMOLED displays can be fabricated that are anticipated to be suitable for large area applications such as TVs. With a tandem architecture, efficient (24 cd/A) OLED structures with exceptional stability (${\sim}100,000\;h$ at $1000\;cd/m^2$) are described. In addition, excellent color gamut (>100% NTSC) can be attained by incorporating advanced color filters into the AMOLED backplane in a typical bottom-emitting configuration.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1342-1344
• /
• 2000

This paper presents a microcontroller-based control circuit for color variation of high brightness RGB LEDs in $8{\times}8$ matrix array. The control circuit is comprised of an AT89C52 chip, D Flip-flops, and transistors for switching, and is used to adjust the number of LEDs operated for color variation. For a stable operation, it is required that the input current to each LED should be maintained to a normal value irrespective of the number of LEDs operated.

• The Korean Journal of Food And Nutrition
• /
• v.6 no.4
• /
• pp.322-328
• /
• 1993

A study of general characteristics of acetone extracted pigment from the cell mass of Rhodospirillum rusrum DSM 467 was carried out for the development of natural food colorant. Through visible absorption scanning, it showed seven absorption peaks at 355, 410, 529, 624, 680 and 747nm, and it was shown to be yellow color. In acidic and neutral conditions, the color was yellow, while in the alkaline condition it was greenish yellow. This pigment was stable at pH range between 3.0~10.0, and below 4$0^{\circ}C$. In the presence of light and oxygen, the stability of pigment rapidly degraded and it became unstable in the presence of metal ions such as Cu2+, Al3+ and Fe3+. Through TLC analysis, it was shown to be composed of seven color fractions.

• Korean Journal of Materials Research
• /
• v.23 no.5
• /
• pp.286-292
• /
• 2013

Generally, the color gold has had a biased conception due to its traditional use. Thus, this bias has resulted in a lack of usage of golden glaze on ceramics and also a lack of extensive studies of such glazes. In this paper, optimum conditions and mechanism of formation of gold color crystallization glaze containing $Fe_2O_3$(hematite), which is developed for gold colors of ceramic glazes, were studied. Experimental result showed that there are pyroxene based on diopside and $TiO_2$ phase in the base of a crystallization glaze with a value of $TiO_2$ of 6 wt% confirmed by XRD and Raman Spectroscopy. When $Fe_2O_3$ was used as a colorant for the gold color, the $TiO_2$ peak became extinct and the intensity of the diopside peak was sharper. Feldspar of 60 wt%, talc of 20 wt% and limestone of 20 wt% were used as the starting materials and these were tested using a three component system. The best result of test was selected and extended to its vicinity as an experiment to determine $TiO_2$ and $Fe_2O_3$ contents. The glaze with $TiO_2$ of 6 wt% and $Fe_2O_3$ of 12 wt% addition showed stable pyroxene based diopside crystals and the development of gold color. This gold color was obtained with CIE-$L^*a^*b^*$ values of 51.27, 4.46, 16.15 (a grayish yellow brown color), which was gained using the following firing conditions: temperature increasing speed $5^{\circ}C$/min, holding for 1 h at $1280^{\circ}C$, annealing speed $3^{\circ}C$/min till $1100{\circ}C$, holding for 2 h at $1100{\circ}C$, and finally natural annealing.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.4
• /
• pp.510-517
• /
• 2008

Effects of addition of Chinese chives into frozen noodle on retrogradation of the cooked frozen noodle were examined by enzymatic evaluation during the storage 3 days at $4^{\circ}C$. The retrogradation rate during storage was significantly reduced by addition Chinese chives. Thus we hypothesized that retarogardation and textural changes of frozen noodle might be linked to thermostable amylase in Chinese chives. The amylase isolated from Chinese chives was affected by temperature and pH of buffer used. The enzyme was mainly extracted 20 mM potassium phosphate buffer(pH 7.0). The enzyme was extremly stable at wide temerature and pH. Amylase activity was maximal at $50^{\circ}C$ and pH 7.5. The enzyme was not inactivated by heat treatment at $70^{\circ}C$, $80^{\circ}C$ for 30 min. We suggest the enzyme was stable at high temperature. To investigate the effect of different storage packge on texture properties, color, sensory evaluation, parent-packged and unparent packaged frozen noodle was compared with control. As the storage passed, the frozen noodle packaged with parent showed a rapid decrease in the color. The hardness was gradually decreased during storage. It was found that unparent packged must be nessasry in the Chinese chives frozen noodle. In changes of sensory properties by traind panel, Chinese chives frozen noodle with 2% blanched Chinese chives got the highest score in overall acceptability, therefore we tried acceptance test by consumers with 2% blanched frozen Chinese chives noodle.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.1
• /
• pp.125-129
• /
• 1994

The acetone extracted pigment from the cell mass of Rhodophila globiformis DSM 161 was generally red. In a pH 5-6 condition, the color of pigment was red, while in p/h 7-9 condition it was yellowish red. The pigment was stable at pH range between 6.0-11.0 and below 4$0^{\circ}C$. In the presence of light and oxygen , the pigment was rapidly degraded and became unstable in the presence of metal ions such as Fe3++(1.0$\times$ 10-2M, 1.0$\times$10-3 M), Al3+ (1.0$\times$10-2 M, 1.0$\times$10-3 M) and Zn2+(1.0$\times$10-2 M). But in the presence of Zn2+ (1.0$\times$10-2M). But in the presence of Zn2+ (1.0$\times$10-3 M) it was very stable. Through visible absorption scanning ,it showed five sharp absorption peaks at 358 , 385, 494, 680 ad 748 nm with three shoulder peaks at 410, 466 and 522nm. On the results of TLC analysis , it was shown to be composed of seven color fractions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.2
• /
• pp.133-141
• /
• 2004

Statement of problem : Porcelain restorations are widely used in restorative dentistry with a high degree of general success. However, porcelain is brittle and may fracture intraorally. Sometimes a repair may be attempted using composite resin and bonding system available. Color stability of porcelain repair resins affects esthetics and prognosis of prosthesis, so that provides important criteria for the choice of porcelain repair resins. Purpose : The purpose of this study was to investigate the color stability of composite resins used widely as porcelain repair system. Materials and method : Composite resins used for this study were Carisma(Kulzer, Germany), Tetric ceram(Ivoclar, Liechtenstein), Filtek Z250(3M, USA), and Arabesk Top(VOCO, Germany). Thirty disc-shaped specimens($10{\times}2mm$) were fabricated from each composite resin. Color changes of specimens after treatment using thermocycling system(KD-TCS30, Kwang-duk F.A. Korea) and after immersion in methylene blue(0.05% by Wt) were measured with colorimeter(Model Tc-6Fx, Tokyo Denshoku Co.) and obtained data were analyzed. Results and Conclusion: The results obtained from this study were as fo11ows. 1. The color change of Filtek Z250 was lesser than those of Tetric ceram and Arabesk Top after thermocycling (12000 times). 2. All of the composite resins in this study showed increase of color change according to increase of thermocycling frequency. 3. After treatment with methylene blue, the color change of Arabesk Top was greater than those of Carisma and Tetric ceram, and Tetric ceram was more stable than others.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.278-287
• /
• 2015

PURPOSE. The aim of this study was to compare the color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for the non-metal clasp dentures to those of thermoplastic polyamide and conventional heat-polymerized denture base resins. MATERIALS AND METHODS. Three types of denture base resin, which are conventional heat-polymerized acrylic resin (Paladent 20), thermoplastic polyamide resin (Bio Tone), thermoplastic acrylic resin (Acrytone) were used as materials for this study. One hundred five specimens were fabricated. For the color stability test, specimens were immersed in the coffee and green tee for 1 and 8 weeks. Color change was measured by spectrometer. Water sorption was tested after 1 and 8 weeks immersion in the water. For the test of cytotoxicity, cell viability assay was measured and cell attachment was analyzed by FE-SEM. RESULTS. All types of denture base resin showed color changes after 1 and 8 weeks immersion. However, there was no significant difference between denture base resins. All specimens showed significant color changes in the coffee than green tee. In water sorption test, thermoplastic acrylic resin showed lower values than conventional heat-polymerized acrylic resin and thermoplastic polyamide resin. Three types of denture base showed low cytotoxicity in cell viability assay. Thermoplastic acrylic resin showed the similar cell attachment but more stable attachment than conventional heat-polymerized acrylic resin. CONCLUSION. Thermoplastic acrylic resin for the non-metal clasp denture showed acceptable color stability, water sorption and cytotoxicity. To verify the long stability in the mouth, additional in vitro studies are needed.

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.315-324
• /
• 2006

This research was conducted to clarify the characteristics of electrochemical decolorization of effluent discharged from a biological animal wastewater treatment process and to finally establish parameters or mode for optimum operation of electrolysis system. Average color unit of wastewater was about 1,200 and DSA(Dimensionally Stable Anode) was used as electrode. Experiments were performed with two different operation conditions or modes, fixed voltage-free current(Run A) and free voltage-fixed current(Run B). Color removal rate was proportional to the electrode area and electrical conductivity, and an equation subject to them at a condition of fixed voltage was derived as follows; Ct=C0ekt, k=[{0.0121×ａ(dm2)× c(mS/cm)}+0.0288], [where, C0: initial color, Ct: color unit after treatment for t, k: reaction coefficient, t: time(min.), ａ: electrode area, c: conductivity]. From the study on the effects of current density on color removal, it was revealed that the removal efficiency of color was function of the current density, showing direct proportion. However, when considered energy consumption rate, maintenance of low current density was an economical way. Based on the obtained results, it was concluded that supplementation of electrolyte is not necessary for the removal of color from the effluent of secondary treatment process and operation with the mode of free voltage-fixed current, rather than operation with fixed voltage-free current mode, would be an efficient way to increase the removal performance and capacity per consumed energy.