• The Journal of Information Technology
• /
• v.8 no.4
• /
• pp.43-50
• /
• 2005

In this paper, we describe a study on the relationship between photographic emulsion manufacture and hardening test of color paper. The hardener was prepared by the reaction of cyanuric chloride with sodium hydroxide, disodium hydrogenphosphate-12-water and trisodium phosphate-12-water in the presence of water. The hardener used in this study is a 2,4-dichloro-6-hydroxy-1,3,5-triazine mono sodium salt. The hardening test of photographic emulsion was studied respectively at pH 5.5, 7, 8.5 and about increasing temperature. Novel hardener can be used in photo-graphic emulsion of color paper and showed very good hardening effect.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.6
• /
• pp.793-801
• /
• 2004

A passive sampler has been developed for measuring formaldehyde in air using methyl yellow and methyl orange indicator. It is based on the color change of the TLC plate on reaction with formaldehyde. TLC plates impregnated with three kinds of solutions containing methyl orange, methyl yellow, mixing of methyl yellow and methyl orange were shown rectilinear response to formaldehyde concentration at constant exposure time. The color change of impregnated TLC plate with criteria air pollution, such as NO$_2$, SO$_2$, CO, $O_3$ was investigated. The color change of TLC plate with $O_3$ is larger than other gases.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.6
• /
• pp.240-243
• /
• 2006

The significant color enhancement in low quality Australian natural sapphire has been achieved by a hydrothermal method. The optimal conditions for the color enhancement of Australian natural sapphire were as follows; hydrothermal reaction temperature: $320{\sim}350^{\circ}C$, duration : 3 days, hydrothermal solvent: 2 M NaOH solution. After the hydrothermal treatment, Australian natural sapphires of transparent colors were obtained, and their grades were found to be improved from commercial to middle/top grade by value chart analysis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.137-137
• /
• 2010

Copper electroplating is a very popular and important technology for depositing high-quality conductor interconnections, especially in through silicon via (TSV). As this advanced packaging technique developing, a mass of copper and chemical solution are used, so attention to these chemical materials into the utilization and costs can not be ignored. An economical and practical real-time chemical solution monitoring has not been achieved yet. Either Red-green-blue (RGB) or optical emission spectroscopy (OES) color sensor can successfully monitor the color condition of solution during the process. The reaction rate, uniformity and quality can map onto the color changing. Hidden Semi Markov model (HSMM) can establish mapping from the color change to upper indicators, and artificial neural network (ANN) can be integrated to comprehensively determine its targets, whether the solution inside the container can continue to use.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.1
• /
• pp.90-94
• /
• 1999

Field Emission display (FEDs) require enhancement in both driving methods and process techniques to improve the display image quality. However, from the point of view of manufacturing, it is difficult to find methods and techniques to realize low cost manufacturing. New and simple color phosphor screen designs were suggested with non-crossed electrode lines and full color anode panels for small area displays were demonstrated. To avoid unwanted reaction with gases produced from phosphors in a high vacuum glass container, a very thin polyimide layer was coated on the phosphor screen. Moreover, to improve the display image quality, black matrix composed of inorganic materials was fabricated. This paper describes the performance and characteristics of the new full color anode panels.

• Applied Chemistry for Engineering
• /
• v.34 no.6
• /
• pp.660-664
• /
• 2023

In this study, a new system to determine the concentration of cholesterol using a color change was developed. The system comprised diacetylene vesicles and cholesterol oxidase (ChOx). 10,12-Pentacosadiynoic acid (PCDA) was used as the diacetylene compound, and PCDA vesicles were formed using sonication. The H₂O₂ produced during the reaction between cholesterol and ChOx was used to initiate the polymerization of the PCDA in the vesicles. During polymerization, the vesicles changed from colorless to blue. Therefore, the cholesterol concentration was proportional to the intensity of the blue color. The absorption at 665 nm indicated that the blue color was directly proportional to the cholesterol concentration. This indicates that the system can be used for cholesterol detection. The minimum cholesterol concentration detected using this system was 1.0 mM.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.2
• /
• pp.139-146
• /
• 1998

The characteristics of color and COD removal for dyeing-wastewater using electrochemical reaction were investigated. >From the result, the removal efficiency of color and COD were increased with increase of temperature, decrease of electrode distance, increase of electrolyte concentration and increase of potential and these were obtained above 99%, above 75% within 30 min, individually. Cause of higher COD removal efficiency, it is more suitable that dyeing-wastewater is treated by electrolytic treatment prior to biological treatment. It is concluded that the electrolytic treatment of dyeing-wastewater can be used as the effective and economical method in practical treatment.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.11a
• /
• pp.103-104
• /
• 2009

Treatment of wool fabric with aromatic aldehydes followed by oxidation with hydrogen peroxide gave rise to coloring reaction. The colored fabric was bleached by reduction and recovered the color by oxidation. The oxidation in ethanol solution gave higher k/s values than that in aqueous solution. Photo-stability of the colored fabric was improved by treating with nickel sulfate.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.180-180
• /
• 2013

Ceramic glaze has been developed by numerous experiences and knowhow of potters for a long time. It has offered curiosity and beauty to many people with a variety of colors. This study first verifies the color difference according to clays and glazing used for the coloration experiment based on generation process and chemical reaction of cobalt sulfate, and determines the effect of a dilution ratio with water on changes in coloration concentration. The cobalt-aluminate spinel and the cobalt-silicate olivine are the strongest of the ceramic pigment, producing a very pure, navy blue color.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.11 no.1
• /
• pp.85-101
• /
• 1993

Poly(vinyl cinnamate) had excellent resolution and no dark reaction and high etch resistent. But is was developed in polar solvent. A aqueous-photopolymer was synthesised for improvment of developability. Poly(vinyl cinnamoyl acetate)(PVCiA) and aqueous-PVCiA(PVCiA-s) was prepared and was characterized with H-NMR. The characteristic of sensitivity and developablity of coating was investigated by Grayscale method.