• YAKHAK HOEJI
• /
• v.37 no.1
• /
• pp.66-75
• /
• 1993

Dental abrasive, dicalcium phosphate dehydrate (DCPD) was prepared and the several important factors affecting on the quality of toothpaste were investigated by means of set test, glycerine absorption, Coulter counter test, color difference, BET adsorption, mercury porosimetery, and rheogram comparing with two foreign DCPDs, MFO4 and Dentphos K. Sample DCPD was prepared by reaction between 85% H$_{3}$PO$_{4}$ and 15% milk of lime at $39^{\circ}C$ (pH6.5), and stabilized with TSPP and TMP. The physicochemical properties of Sample DCPD were obtained as follows: whiteness (98.99), average particle size (15.5 $\mu\textrm{m}$), pH (7.9), remainder particle weight (0.49w/w%), glycerine absorption value (64 ml), and set test (passed). N$_{2}$ adsorption curves (BET) of three kinds of DCPD showed non-porous type III isotherm. BET adsorption parameters of sample DCPD showed that surface area was 24.9 m$^{2}$/g, total pore volume 0.09 cm$^{3}$/g and average pore radius 72.0 $\AA$. The rheogram of the toothpaste containing each DCPD showed bulged plastic flow with yield vlaue and thixotropic behavior. These results meet standard requirements as abrasive standard, and suggested that synthesized sample DCPD could be used a dental abrasive such as a high quality grade in practice as foreign DCPDs.

• Journal of Surface Science and Engineering
• /
• v.53 no.1
• /
• pp.15-21
• /
• 2020

In this study, growth and burning behavior of 6061 aluminum alloy was studied under constant anodic voltages at various temperatures and magnetic stirring rates in 20% sulfuric acid solution by analysing I-t curves, measuring thickness and hardness of aluminum anodic oxide (AAO) films, observations of surface and cross-sectional images of AAO films. AAO films were grown continuously at lower voltages than 18.5V but burning occurred when a voltage more than 19V was applied in 20% H₂SO₄ solution at 20±0.5℃ and 200 rpm of magnetic stirring. The burning was always related with an extremely large increase of anodic current density with anodizing time, suggesting that high heat generation during anodizing causes deteriorations of AAO films by chemical reaction with acidic solutions. The burning resulted in decreases of film thickness and hardness, surface color brightened and formation of porous defects in the AAO films. The burning voltage was found to decrease with increasing solution temperature and decreasing magnetic stirring rate. The decreased burning voltages seem to be closely related with increased chemical reactions between AAO films and hydrogen ions.

• Journal of Surface Science and Engineering
• /
• v.53 no.1
• /
• pp.29-35
• /
• 2020

In this study, five different specimen preparation methods were introduced and their advantages and disadvantages were presented. One of them, an epoxy mounting method has advantages of constant exposure area, ease of surface preparation without touching the specimen surface during polishing or cleaning, use of small amount of material and ease of specimen reuse by polishing or etching. However, in order to eliminate unexpected errors resulting from preferable reaction at the specimen/epoxy interface and contact resistance between the specimen and copper conducting line for electrical connection, it is recommended to cover the wall side of the specimen with porous anodic oxide films and to remain the contact resistance lower than 1 ohm. The increased contact resistance between the specimen and Cu conducting line appeared to result in increases of anodizing voltage and solution temperature during anodizing by which thickness and hardness of anodizing film on Al2024 alloy were drastically decreased and color of the films became more brightened.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.34-34
• /
• 2011

Recently, people have concerned about environmental pollution. This environmental pollution occur due to many reasons such as heavy metal ions and anions. In this regard, many researchers have studied organic materials to monitor above reasons to protect environmental pollution. One of the organic materials for this function is chemosensor. This chemosensor has been studied and reported about monitoring toxic heavy metal ions and anions. In this study, the dye sensor was designed and synthesized through reaction of Rhodamine 6G and 1,3-Indanedion. this dye sensor selective detected $Hg^{2+}$ metal ions while showing red color absorption and yellowish-green strong fluorescence emission compared to other heavy metal ions such as $Cu^{2+}$, $Hg^{2+}$, $Ag^{2+}$, $Zn^{2+}$, $Fe^{2+}$ and $Fe^{3+}$. In this regard, we anticipated that this dye senosr can provide an significant material for monitoring mercury which cause environmental pollution. Thus, We investigated detailed properties of this dye sesnor with using UV-Vis absorption and fluorescent spectrophotometer, Job's plot method for metal binding complex, computational simulated calculation named Material Studio 4.3 suite to approach for electron distribution and HOMO/LUMO.

• Korean journal of food and cookery science
• /
• v.21 no.6 s.90
• /
• pp.776-781
• /
• 2005

Preparation of nectar using Kabocha squash was optimized and the quality changes during 7 weeks'storage were investigated. The paste for the nectar base could be effectively obtained by consecutive processes of steaming for 15 min, crude smashing and homogenization. To improve the mouth-feel of the nectar, various pectinases and cellulases were treated with Econase CE, Rapidase press, Macerozyme A, Sumizyme MC and Cytolase M102. Among them, Cytolase M102 was the most effective enzyme at $0.05\%$ for 90 min reaction in terms of the collective results as the residue of the nonsoluble solids, viscosity and alcohol test. The best ratio of the nectar ingredients was a ratio of water to paste of 1.5, $11^{o}$Brix of saccharinity, $0.025\%$ of citric acid and $0.15\%$ of xanthan gum. When the retort sterilized nectar in a can was stored in an incubator at $35^{\circ}C$ for 7 weeks, the color, pH, saccharinity, viscosity and total count plates remained almost unchanged.

• Food Science of Animal Resources
• /
• v.21 no.1
• /
• pp.56-63
• /
• 2001

In this study, three domestic and one foreign formulas for the infants up to 5 month old were examined to detect chemical changes such as pH, reactive sulfhydryl groups(RSH) content, 5-hydroxymethylfurfral(HMF) content, available lysine content, electrophoresis, and surface color caused by heat treatment for long term storage. In the SDS-polyacrylamide gel electrophoresis, A and B products showed similar pattern, while C product had a clearly distinguishable $\beta$-lacto-globulin band, but in casein, only D product showed a few strong casein band. RSH content, which indicate the extent of whey protein denaturation, ranged from 4.40 to 5.93 mmole/g protein. HMF content. which indicate the extent of Maillard reaction, ranged from 192 to 432 $\mu$mole/100g in formulas. B product showed the highest RSH and HMF content. Available lysine content ranged from 31 to 46 mg/g protein. Among them D product contain the highest available lysine content and others showed no significant difference. In conclusion, the domestic infant formulas showed higher RSH and HMF content than the foreign product and the available lysine content of the domestic products were lower than of the foreign product.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.3
• /
• pp.266-272
• /
• 2010

Natural Ginger extract was extracted from Ginger component using ethanol as a solvent, and we tested various pharmaceutical characteristics in this extract. Characteristics experiment to use natural Ginger extract tested antimicrobial experiment using microbe, and analyzed organic and inorganic component with analysis instrument. From the result of characteristics experiment, some conclusions are obtained as follow. In this experiment, natural Ginger extract was obtained about 22.50 g-Ginger extract(extraction ratio : 1.80%) as liquid state of some viscous yellow-brown color. The result of antimicrobial experiment with staphylococcus aureus and aspergillus niger in microbe decreased more and more according to passage of reaction time. This phenomenon could know that Ginger extract has influenced to antimicrobial effect. In the result of instrumental analysis, aromatic organic components of benzimidazole(1.283), propyl isothiocyanate or isothiocyanic acid(1.477) etcs from Ginger extract were detected with GC/MS and inorganic component of Ca(27.6 ppm), K(24.08 ppm), Mg(6.03 ppm), Na(1.02 ppm), Zn(1.02 ppm), Sb(0.711 ppm) and Li(0.079 ppm) etcs from Ginger extract were detected with ICP/OES.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.12
• /
• pp.1127-1131
• /
• 1996

[FeⅡ2(N-Et-HPTB)Cl2]BPh4(1), where N-Et-HPTB is the anion of N,N,N',N'-tetrakis(N-ethyl-2-benzimidazolylmethyl)-2-hydroxy-l,3-diaminopropane, has been synthesized to model dioxygen binding to the diferrous centers of proteins. 1 has a singly bridged structure with a μ-alkoxo of N-Et-HPTB and contains two five-coordinate iron(Ⅱ) centers with two chloride ligands as exogenous ligands. 1 exhibits an electronic spectrum with a λmax at 336 nm in acetone. 1 in acetone exhibits no EPR signal at 4 K, indicating diiron(Ⅱ) centers are antiferromagnetically coupled. Exposure of acetone solution of 1 to O2 at -90 ℃ affords an intense blue color intermediate showing a broad band at 586 nm. This absorption maximum of the dioxygen adduct(1/O2) was found in the same region of μ-l,2-peroxo diiron(Ⅲ) intermediates in the related complexes with pendant pyridine or benzimidazole ligand systems. However, this blue intermediate exhibits EPR signals at g = 1.93, 1.76, and 1.59 at 4 K. These g values are characteristic of S = 1/2 system derived from an antiferromagnetically coupled high-spin Fe(Ⅱ)Fe(Ⅲ) units. 1 is the unique example of a (μ-alkoxo)diferrous complex which can bind dioxygen and form a metastable mixed-valence intermediate. At ambient temperature, most of 1/O2 intermediate decays to form a diamagnetic species. It suggests that the dacay reaction of the intermediate might be bimolecular, implying the formation of mixed-valence tetranuclear species in transition state.

• Journal of Surface Science and Engineering
• /
• v.52 no.4
• /
• pp.233-238
• /
• 2019

The formation behavior of zinc phosphate conversion coating (ZPCC) on SCM430 alloy was investigated in 25 vol.% of 1M ZnO + 170 ml/L solution containing various $Fe(NO_3)_2$ concentrations, using open-circuit potential(OCP), electrochemical impedance spectroscopy(EIS), cyclic polarization(CP) curve and tape peel test. OCP of SCM430 alloy and corrosion current density increased with increasing $Fe(NO_3)_3$ concentration. Resistance of films formed on SCM430 alloy by chemical conversion treatment decreased with increasing $Fe(NO_3)_3$ concentration. Color and adhesion of chemical conversion coatings became darker and worse, respectively, with increasing $Fe(NO_3)_3$ concentration. It is concluded that addition of $Fe(NO_3)_3$ into a zinc phosphating bath leads to faster reaction to form porous surface coatings with poor adhesion and corrosion resistance.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.959-961
• /
• 2011

Manure-based composts can have detrimental effects on the agricultural lands and crops if they are applied without proper stabilization process. Composting is well-known method for the stabilization of manure-based composts and the extent of composting could be examined by maturity test. Among various methods to examine compost maturity, the performances of two mechanical methods (Solvita and CoMMe-100) were examined and the test results were compared with seed germination test. The mechanical methods are considered to be simple and relatively objective. Also they are cost- and time-efficient. Ten commercially available composts collected in Korea were used for this study. Basically, the maturity determined with these mechanical methods was in good agreement with the seed germination test. However, it appeared that the index levels of compost maturity indicated more maturity by CoMMe-100 than Solvita for the same compost. The differences between maturity index levels determined by both methods were able to be minimized through extending the reaction time for CoMMe-100 and adjusting index level for maturity determination in the standard color chart.