• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.428-432
• /
• 2013

This research presents a flexible reflective thermochromic display (TCD) comprised of thermochromic pigments and a patterned indium tin oxide (ITO) film coated on a polyethylene naphthalate (PEN) substrate, and the display's thermo-optical characteristics. The display showed maximum red, green, and blue reflectances of 30%, 38%, and 29%, respectively. Furthermore, the display exhibited a continuous grey color when the temperature was changed continuously. As a flexible display, the display showed reliable thermo-optical performance without image damage even when highly bent. We expect the proposed TCD will be used in outdoor information display applications where low cost is a key factor.

• Journal of Ginseng Research
• /
• v.19 no.2
• /
• pp.153-159
• /
• 1995

Roasting ginseng marc was roasted at different temperatures (140, 170, 200, 23$0^{\circ}C$) and for different periods (10, 20, 30 min) produced aqueous soluble brown pigments, gel filtration of which over Sephadex G-50 yielded 3 fractions A, B, C. The treatment at higher temperature and for longer time lead to increase of peak A and decrease of peak C. The contents of the brown pigments and the degree of brown color increased about 4 times and over 6 times, respectively, by roasting at 23$0^{\circ}C$ and for 30 min as compared to the control. 5-Hydroxymethyl furfural in aqueous and 50% ethanol extracts of treated samples at 23$0^{\circ}C$ and for 30 min was increased to 3.6 times and 8 times, respectively, and carbonyl compound in both aqueous and 50% ethanol extracts was increased 3 times. Also pyroxene-like substance was increased apparently in both aqueous and 50% ethanol extracts of treated samples.

• Journal of Conservation Science
• /
• v.35 no.1
• /
• pp.91-98
• /
• 2019

The fragments of a wall painting excavated from among the historical remains of Jeseoksa Temple in Iksan. The extent of the damage to the fragments was examined and an analysis of the components of the pigment was conducted. The results of the component analysis of the pigment confirmed that the white pigment consisted of alkali feldspar and mullite. Although the results of the visual inspection revealed differences in color in the red and black pigments, the main component of the two colors was confirmed to be iron oxide. Red and black pigments are found at the same position. Although differences of color is obvious, those are identified as hematite and magnetite of oxidized steel's affiliation. It is judged that Differences of ingredients happened by external environment's factors.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.22-35
• /
• 2021

Recently, as the climate changes rapidly and the prevalence of airborne fine particulate matter increases, the pattern of pollutants in the atmospheric environment is also changing. Therefore, the importance of studying the stability of pigments used in colored cultural properties is emerging. Hoecheong is an inorganic blue glass pigment called smalt; it is made by using cobalt as a coloring element in potash glass, and was widely used in colored cultural assets, such as murals and paintings. In this study, we collected three other hoecheong pigments to analyze their properties. The percentage of Co and K contained are different according to the manufacturer, and the smalt-3 sample has a lower cobalt content (15.1 wt.%) and higher potassium content (29.6 wt.%). After this analysis, colored specimens were prepared. Prepared specimens were exposed to ultra-violet rays, CO₂/NO₂, and NaCl, which are known to have the greatest influence on the stability of pigments. We found that factors affecting the color stability were NO₂ gas, ultra-violet rays, and water-soluble salts (NaCl). Among them, NO₂ has the most severe impact on color change of the pigments. Results of the component analysis showed that the color change depends on the potassium and cobalt content of the hoecheong pigment. Among the specimens, smalt-3 showed the most vulnerability after exposure to NO₂ gas and water-soluble salts. Pigment film stability is affected by watersoluble salts, giving rise not only to color change, but also weakening the physical properties of the film. However, there was no significant change in composition and color after exposure to CO₂ gas. In conclusion, we found that hoecheong pigments underwent color change and increased instability of the coating film when exposed to any of the atmospheric environmental factors used in this study, except for CO₂.

• Korean Journal of Materials Research
• /
• v.21 no.8
• /
• pp.450-455
• /
• 2011

[ $Al_2TiO_5$ ]has a high refractive index and good solubility of the chromophore in the $Al_2TiO_5$ lattice, which allows this structure to be a good candidate for the development of new ceramic pigments. However, pure $Al_2TiO_5$ is well known to decompose on firing at $900{\sim}1100^{\circ}C$. However, this process can be inhibited by the incorporation of certain metal cations into its crystalline lattice. In this study, the synthesis of gray ceramic pigment was performed by doping cobalt on the $Al_2TiO_5$ crystal structure. The $Al_2TiO_5$ was synthesized using $Al_2O_3$ and $TiO_2$, and doped with $Co_3O_4$ as a chromophore material. In order to prevent the thermal decomposition during the cooling procedure, MgO was added to samples by 0.05 mole, 0.1 mole, and 0.15 mole as a stabilizer. The samples were fired at $1500^{\circ}C$ for 2 hours and cooled naturally. The crystal structure, solubility limit, and color of the synthesized pigment were analyzed using XRD, Raman spectroscopy, UV, and UV-vis. $Al_2O_3$ was available for the formation of $CoAl_2O_4$, which should also be considered in order to explain the small amount of this phase detected in the sample with the higher $Co^{2+}$ content (${\geq}$ 0.03 mole). It was found that the solubility limit of $Co^{2+}$ in the $Al_2TiO_5$ crystal was 0.02 mole% through an analysis of Raman spectroscopy. Through the addition of a pigment with 0.02 mole% of $Co^{2+}$ to lime-barium glaze, stabilized gray color pigments with 66.54, -2.35, and 4.68 as CIE-$L^*a^*b^*$ were synthesized.

• Journal of the Korean Ceramic Society
• /
• v.47 no.5
• /
• pp.450-456
• /
• 2010

During the process of synthesizing green celsian pigments, attempts were made to replace a given amount of $BaCO_3$ with $SrCO_3$ to accelerate the hexagonal to monoclinic celsian phase transition, which was assumed to promote color development. Monoclinic celsian have been synthesized from Hongkong-Kaolin, $BaCO_3$, $SrCO_3$, $Al(OH)_3$, $SiO_2$ and $SrCO_3$ with 1 to 1.5 wt% of LiF as a mineralizer from 1100 to $1300^{\circ}C$. It was found that replacing $BaCO_3$ with $SrCO_3$ allowed monoclinic celsian to be formed at a lower temperature. While the pigments containing 1 mole of $BaCO_3$ were difficult to synthesize monoclinic celsian with absence of the mineralizer, the formation of monoclinic celsian was successfully achieved even without mineralizer by using 0.25 mole of $SrCO_3$ at $1250^{\circ}C$ for 1 h. The color development was improved from yellowish green to green with increasing amount of $SrCO_3$ being replaced.

• Korean journal of food and cookery science
• /
• v.16 no.3
• /
• pp.255-259
• /
• 2000

The effects of the concentrations of Gardenia blue pigments and sugar types(honey and oligosugar) on the sensory quality characteristics of starch Dasik were investigated to develop a new blue colored starch Dasik. The blueness(-b value) was increased with the increase of blue pigment, while lightness(L value) was decreased. TPA values showed that hardness, fracturability, gumminess and chewiness were increased with the increase of blue pigment significantly(p<0.05), especially in honey-Dasik. In sensory evaluation, honey-Dasik with 0.04%-blue pigment showed higher scores than any other samples, especially in color, sweetness and overall acceptability, but was not significantly different.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2002.11a
• /
• pp.113-115
• /
• 2002

Two experiments were conducted to compare the effects of the natural and the synthetic commercial pigments on the laying performance, pigmentation and fatty acid contents in egg Yolk of laying hens. Feed intake, egg production, egg weight and feed efficiency did not have significant difference(p〈0.05) in experiments I and II. White height and haugh unit did not have significant difference(p〈0.05) in two experiments. In order to approach the yolk pigmentation to 12∼13 of Roche color fan, addition level of natural red pigment was 25∼30 ppm. In the case of synthetic red pigment, the level was 15∼20 ppm. In this experimental condition, the pigmenting effect of the synthetic pigment had better than that of the natural pigment. In the experiment 2, the Pigmenting effect of mixing Pigments were inveatigated between TM2 mixed with natural red pigment, and TM6 mixed with synthesis red pigment. The fatty acid content in yolk was not affected by pigment addition.

• Journal of the Korean Ceramic Society
• /
• v.51 no.3
• /
• pp.184-189
• /
• 2014

Electric arc furnace dust (EAFD) is a solid waste generated by the steel-scrap recycling process. It mainly consists of zinc oxides (ZnO), alumina ($Al_2O_3$), iron oxides ($Fe_2O_3$), and silica ($SiO_2$). Here we report the preparation and characterization of blue ceramic pigments using EAFD powder as a starting material. $(Zn(EAFD),Co)Al_2O_4$ blue ceramic pigment was prepared by the solid-state reaction method. The color characteristics of the pigment obtained were compared with those of pure $CoAl_2O_4$. The new pigment was characterized using XRD, CIE-$L^*a^*b^*$ color-measurements, SEM, and EDX. The XRD analysis revealed that the $(Zn(EAFD),Co)Al_2O_4$ pigment was composed of mainly the spinel phase of $(Zn,Co)Al_2O_4$. The $Zn(EAFD)_{0.25}Co_{0.75}Al_2O_4$ pigments showed a vivid blue color with a $b^*$ value of -28.64 and a good glaze stability with a transparent glaze.

• Journal of Fashion Business
• /
• v.10 no.1
• /
• pp.94-105
• /
• 2006

Hair bleaching is a treatment process in which the melanic pigment is oxidized by hydrogen peroxide. With the increase of the number of treatments, $1{\sim}10$ levels of various colors develop, the hair luster diminishes, and the appearance becomes very rough. In this study, by changing the number of hair bleaching and bleaching conditions, the changes in the degree of hair damage and its process were observed through the use of scanning electron microscopy. The color changes were also compared through the use of spectrophotometer. In order to study the physical changes of the bleached hairs and to search for the optimum conditions to keep the hair damages minimum during bleaching, tensile properties were measured and reviewed. By increasing the number of hair bleaching and by the severe conditions, the scales became eroded and the protection layers were decreased, and the oxidation reached the inner sectors resulting in rough surface and fibrillation. The surface of the hairs became bright yellowish and transparent by the bleaching of melanic pigments or by the destruction of pigments. With the increase of bleaching degree, in terms of physical changes, the breaking strength decreased while the elongation increased a little.