• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.3
• /
• pp.348-356
• /
• 2013

Denim washing is processed with different washing techniques such as stone washing, chemical washing, sand washing, and bio washing. Cellulase bio washing can meet environmental regulations that enhance and rectify problems associated with traditional decolorization techniques; however, stone washing needs to be added to the processing because it produces a low decolorization effect. There is also the problem of additional strength reduction. To prevent these problems, a new enzyme for bio washing is required. This study examines the optimum laccase treatment conditions on denim and evaluated the characteristics of laccase-treated denims to establish a database of eco-friendly new decolorization process on denim using a new laccase enzyme. The results show that the optimum conditions of laccase on denim are a pH of 4.0, $30^{\circ}C$, 7% (o.w.f.), and 6 hours in 10 mM of buffer concentration. UV absorbance and HPLC identified isatin coexist with anthranilic acid in solution after laccase treatment on denim. Results of the surface color, the surface morphology and the tensile strength indicate that laccase treatment shows an excellent decolorization effect without fiber damage. The wet cleaning fastness and the perspiration fastness also improved.

• Textile Coloration and Finishing
• /
• v.15 no.1
• /
• pp.30-38
• /
• 2003

Research to dyeing properties of Ulmi cortex extract, silk and cotton fabrics were dyed and mordanted. Dyes were extracted from distilled water according to different pH values. The dyeability of Ulmi cortex extract were evaluated by conditions of dyeing temperature, dyeing time, dyeing pH, mordanting temperature, mordanting time, mordanting concentration and color fastness, etc. IR spectrum possessed absorption band of -OH at $3400cm^{-1},\;C-H\;at\; 2940cm^{ -1},\;aromatic\;C=C\;at\;1628cm^{-1},\;1518cm^{-1},\;C-O\;at\; 1107cm^{ -1},\;1043cm^{-1}$. And the $\labmda$max of extract appeared at 220nm and 280nm, so the substance of Ulmi cortex extract were catechin and tannin. Surface color of dyed fabrics were reddish yellow~yellow~greenish yellow. From the color fastness test, the fabrics dyed with PH 7 extract were excellent in irradiation and washing. Mordanting improved the color fastness and K/S value of dyed fabrics.

• Journal of Sericultural and Entomological Science
• /
• v.38 no.2
• /
• pp.168-174
• /
• 1996

Dyeing on silk with vat dyes which shows good color fastness at strong alkaline conditions were newly examined. The optimum conditions of dyeing bath to prevent the damage on the tensile strength and elongation were sodium hydroxide(NaOH) 10g/l, sodium hydrosulfite(Na2S2O4) 20~22 g/l, for 30 min at 5$0^{\circ}C$. The color yield of silk fabrics was increase according to the concentration of NaOH and Na2S2O4, but decreased at higher concentration than that of NaOH 10g/l and Na2S2O4 22g/l. The vat dyeings showed excellent color fastness against washing and light, compared with the conventional dyeings.

• Textile Coloration and Finishing
• /
• v.24 no.4
• /
• pp.270-280
• /
• 2012

This study examined the dyeing characteristics of five oriental herbs, namely Gardenia jasminoides, Sophora japonica L., Rheum coreanum, Rhus javanica L., Ginkgo biloba L., on fabrics with traditional fermentation using malt. And the properties of Hwangsu (mineral water) of Yeongcheon (Korea)as a mordant in the post-treatment of textile were evaluated. The dyeability and fastness of cotton fabric and silk to light and washing as well as different fermentation periods and temperatures were investigated, and the following results were obtained. The dyeability of the fermented and non-fermented material did not show a significant difference. Fabrics mordanted with Hwangsu generally exhibited a reddish color due to the presence of iron. The dyeing of cotton fabric and silk by fermentation and Hwangsu mordanting were found to be effective on Rhus javanica L. and Rheum coreanum. These results were confirmed through fastness to light 3 of cotton on Rheum coreanum and 3-4 of silk on Rhus javanica L., respectively. The washing fastness of both fabrics dyed with fermented Rhus javanica L. and Rheum coreanum was improved, showing higher K/S value after washing than before washing.

• Fashion & Textile Research Journal
• /
• v.18 no.4
• /
• pp.531-539
• /
• 2016

Charcoal dyed fabrics have been widely used in home textiles and functional clothing due to their anti-statics, antibacterial, deodorization, far infrared emitting and anion releasing. Soybean fiber were regenerated from soybean. Soybean fiber have biodegradable, microbiocidal, non-allergic, and anti-ageing properties. The purpose of this study is to investigate the dyeing characteristics of soybean fabric using charcoal as colorants. Soybean fabrics were dyed with charcoal solution according to concentration of charcoal, dyeing temperature, and dyeing time. To improve washing fastness and investigate mordanting condition, soybean fabric and dyed soybean fabric with charcoal were mordanted by mordanting agents such as $CH_3COOH$(acetic acid), NaCl(sodium chloride) and $AlK(SO_4)_2{\cdot}12H_2O$(Aluminium Potassium Sulfate). Dyeability and color characteristics of charcoal dyed soybean fabric were obtained by computer color matching and SEM morphology analysis. Particle size of charcoal and color fastness were also investigated. The results obtained were as follows; Mean average diameter of charcoal was $1.39{\mu}m$. The dyeability of soybean fabric using charcoal as colorants was increased gradually with increasing concentration of charcoal dyeing solution and saturated at about 8%(o.w.b.). The optimum dyeing temperature and dyeing time were $90{\sim}105^{\circ}C$ and 60~90 minutes respectively. The overall wash fastness at dyeing concentration 2~4%(o.w.b.) and 6~10%(o.w.b.) were 4 degree and 3-4 degree respectively. The fastness to washing according to mordanting method indicated good grade result as more than 4 degree in all conditions. On the other hand, the staining of adjacent fabrics, i.e. PET, Acryl, Wool, Acetate, Nylon and Cotton was found to be of grade 4 or 4-5 in all conditions.

• Textile Coloration and Finishing
• /
• v.31 no.2
• /
• pp.88-97
• /
• 2019

In this study, when printed on a nylon material, the color strength and fastness are lower than that of a polyester material, and the nylon material shrinks due to heat and pressure, resulting in poor design and poor compatibility. To overcome this problem, we investigated the possibility of transfer DTP by adding pre-treatment process to nylon transfer DTP process. For the basic study of pre-treatment preparation, we used pure nylon material which is not compounded and dispersion ink and transfer paper applied to existing PET transfer DTP. Pre-treatment preparations were classified into three types of acryl-base polymer and pre-treated with nylon and then applied to transfer DTP to confirm their color strength and fastness. The color strength of the pre-treated nylon material increased and poly-methyl-acrylate amulsion pre-treatment showed the best color at $210^{\circ}C$, 1.5m/min and 0.3MPa. The nylon material pre-treated with washing, friction, and light fastness was judged to be more excellent and stable.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.11
• /
• pp.1520-1526
• /
• 2005

Henna is a natural colorant and has been used to dye hair, skin and leather since civilization began. It has reddish brown to orange shade. The major color components of Henna are Lawsone(2-hydroxy-1,4-naphthaquinone) and Luteolin (3',4',5,7-tetrahydroxy-flavone). In this study, various fibers containing the nitrogen component, especially used fur underwear, were dyed with Henna under various dyeing conditions, then dyeing characteristics, color fastness, and anti-bacterial properties were evaluated. from the results, Henna has good affinity to the chlorinated wool>wool>Pu/nylon>nylon>soybean>silk in decreasing order. The color fastness of the wool fabric dyed with Henna to washing, dry-cleaning, and perspiration showed 4-5 grade. The color fastness to light was 3rd grade. These results are relatively good comparing with other natural dyes. Moreover dyed fabric with Henna showed excellent antibacterial activity.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.219-229
• /
• 2016

The purpose of this study was to investigate the dyeability of silk fabrics with sweet potato stem leaf extract. To obtain the optimal dyeing conditions it was examined at various dyeing conditions(temperature, pH, time and bath ratio). The dyeability and the depths of shade which were evaluated in terms of K/S and CIELAB color difference values of the dyed and mordanted fabrics were also investigated. After dyeing, various color fastness(wash fastness, dry cleaning fastness, light fastness, rub fastness, and perspiration fastness) was measured and reviewed for UV protective, deodorant and antimicrobial functionality. The optimun output, as a result, was shown at 100% of dye concentration, $90^{\circ}C$ of dyeing temperature and 80 minutes of dyeing time while in terms of dye uptake depending on the kind of mordants and mordanting, it was found that among four mordants of $Alk(SO_4)_2$, $CuSO_4$, $SnCl_2$, and $FeSO_4$, post-mordanting with $SnCl_2$ showed the best results. Color fastness to dry cleaning, washing and rubbing was found strong at grade 4-5 and the grade to perspiration was as good as 3 while to light fastness was good at 4 as well. In aspects of functional properties, it showed excellent results of 98.3% UV protection rate and 88% deodorization rate. Antibacterial activity was 99.9% against staphylococcus aureus and 73.3% against klebisella pneumoniae. In conclusion, we validated that the dyestuffs from the disused sweet potato stem leaf extract would be useful as a natural dye material using the optimized conditions and dyeability for silk dyeing.

• Journal of the Korean Society of Costume
• /
• v.39
• /
• pp.79-89
• /
• 1998

This study was carried out the effect of stability and color extract for it's condition in the curcuma L.. dyeing. The stability is to investigate the absorbance of the curcumin, one of the major yellow pigments and the stability regarding the effect of light, oxygen temperature and pH. The dyeing condition is compared the effect of mordanting condition and the best way to extract pigment and analysed through the color-fastness rating, color-difference value test. The main results obtained are summarized as follows ; 1.The best and proper solvent to extrect curcumin pigment was a ethanol and a distilled water. 2. The light effect indicated that the absorbances of solution in absence of ligh was more stable. 3. The oxygen(O2) effect to curcumin show-ed that the condition in the absence of O2 was more stable than that in presence of O2 4. The temperature showed that the absorbnace was best stable in4$^{\circ}C$ and less changed at $25^{\circ}C$ 5. The curcumin-etanol solution was stable in pH 2~4. 6. Generally color-fastness rating to silk, wool and cotton indicated that crocking C.F. and perspiration C.F. were more than 3rd grade and dry cleaning C.F. was more than 4th grade. But light color-fastness and washing color-fastness were very poor. 7. To make good color fastness, the mordan-ting treated group and the pre-mordant conditions were more effective than others 8. When compared with color-difference value test indicated that the silk was looks like more reddish and bluish color and than the wool and cotton were greenish and bluish. As a mordant, A(C2H4OH(COOH3) and D(K2Cr2O7)were more effective to make green-ish color in the silk and the reddish color was abtained by B(Al.K(SO4)2.12H2O) and C(FeSO4.7H2O).

• Textile Coloration and Finishing
• /
• v.24 no.3
• /
• pp.180-188
• /
• 2012

Following the reported study that showed the dyeability of diamino-anthraquinoid blue dyes substituted with relatively shorter alkyl groups, the longer aliphatic substituents than pentyl group were examined in terms of the color strength and fastness properties toward UHMWPE fibers. The color strength was increased up to pentyl group and then gradually decreased. However, the fastness properties were improved continuously to octyl group which was the longest alkyl substituent in this study. The most effective maximum color strength was obtained at $130^{\circ}C$ for 2 hours with 3% owf of dyes. The overall fastnesses to washing, rubbing, and light were good enough for practical uses.