• Textile Coloration and Finishing
• /
• v.27 no.3
• /
• pp.202-209
• /
• 2015

Many of the natural dyes used for natural dyeing are difficult to maintain colorfastness due to their complex structure and specific properties. Therefore, there is a need for developing of color sustainable ability for use as an advanced coloring agent for fabrics, which would eco benign or not. In this study, the natural dye extracted from the waste of grape fruits was used to dye cotton fabric. Thus, the present study aims at extraction of color from grape seeds, skin, and stem through fermentation and then employing the same in dyeing and mordanting of cotton. Dyeing experiments were done under different conditions of fermentation and protein type mordants which were treated before and after dyeing. Experimental fabrics were used with cotton after scouring. Color value of dyed fabrics and color fastness of cotton dyed fabrics to washing and light were measured. The fastness of dyed experimental fabrics was increased by mordanting of protein fermentation and the color of dyed cotton was light red purple. The color of dyed fabric found with the optimum mordant treatment when treated with pre milk-mordant at $40^{\circ}C$ for 30min and 3% grape seed extract. On the whole, reddish tone very slightly increased with the milk pre-mordant. The color fastness of dyed cotton fabrics to light and washing was increased after fermentation.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.1-9
• /
• 1993

The Cotton fabric was dyed with various directd dyes, and then treated with copper sulfate or copper sulfate/thiourea. Munsell color system, dye exhaustion, tensile strength, light fastness, washing fastness and rubbing fastness were investigated for the treated fabrics. The results obtaind are as follows: 1. The color variation of the cotton-dyed fabric by aftertreatment with copper sulfate was shown redish, but original color with copper sulfate/thiourea. 2. Copper sulfate/thiourea was much more effective than copper sulfate only to increase the light fastness, washing fastness and rubbing fastness. 3. Dye exhaustion of the cotton-dyed fabric by aftertreatment with copper sulfate was decreased about 20% more than those of untreated. 4. Tensile stregth of cotton-dyed fabric by aftertreatment with copper sulfate/thiourea was decrease about 10% more than those of untreated.

• Textile Coloration and Finishing
• /
• v.16 no.6
• /
• pp.16-22
• /
• 2004

This study was carried out to investigate K/S values, surface color, the fastness to washing, bacteria reduction rate of the silk and cotton fabrics dyed with Rhus verniciflua extract under the various dyeing conditions. The optimum dyeing temperature, dyeing time, dyeing pH and repetition of the silk fabrics dyed with Rhus verniciflua extract were $l00^{\circ}C, 30min., pH 5, five times repetition respectively, but in the cotton fabrics, it were $60^{\circ}C . 30min., pH 7, one times repetition. It were colored orangish Yellow in the silk fabrics and colored bright yellow in the cotton fabrics dyed with Rhus verniciflua extract. Surface color(munsell value) was not changed by the mordanting agents but those of the silk showed high tone when mordanting with stannous chloride, and it was decolored and darked when mordanting with ferric sulfate. The fastness to washing in the silk fabrics dyed with mordanting agents improved in 4～5 grade, but the cotton fabrics were 3～4 grade, so washing fastness of the silk and cotton fabrics were significantly improved when washing with the neutral detergent. The bacteria reduction rate of the silk fabrics increased drastically by dyeing of Rhus verniciflua extract.

• Journal of Fashion Business
• /
• v.22 no.4
• /
• pp.106-117
• /
• 2018

The present study was conducted to investigate dyeing properties and functionality of silk fabrics dyed with extracts from buckwheat skin. Comparative results of color strength(K/S) values of dyed silk fabrics were studied to quantify the effects of dye concentrations, dyeing temperatures, dyeing time and the pH; the effect of mordants; and color changes. And also evaluated the fastness, antimicrobial property, ultraviolet protection properties of the dyed and mordanted silk fabrics. The color strength(K/S) values of silk generally increased depending on the increasing dye concentration, dyeing temperature, and dyeing time. And the highest color strength values were obtained at a dye concentration of 100%(v/v), a dyeing temperature of $90^{\circ}C$, a dyeing of time 80 minutes, and a dyebath of pH 2. The color fastness to light of dyed and mordanted silk fabrics were found to be good, and the drycleaning and rubbing fastness were excellent. The fade of washing fastness was not good, however, the stain of washing fastness and perspiration fastness showed relatively good grade. The Al, Cu, Fe mordanted silk fabrics(except Fe for Klebsiella pneumoniae) showed 99.9% reduction rate. The ultraviolet protection properties of the mordanted fabrics were generally improved. Moreover, the Cu and Fe mordnared fabrics showed very exceptional ultraviolet protection factors.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.462-468
• /
• 2014

This study investigates the dyeability of soybean protein fabric after dyeing with gallut. In this study, the colorants of gallnut were extracted with boiling water at $60^{\circ}C$ and 60min. Soybean protein fabric was dyed with extracted solution from gallnut according to concentration, temperature and time. After dyeing with gallut solution, dyeability (K/S) was obtained by CCM observation. Al, Cu and Fe were employed as a mordanting agents. Various color changing were produced by the interactions of mordants that were different from soybean protein fabric; however, Al mordant was not indicated as a variable color change. Fastness to washing and light were also investigated. Consequently, the dyeability of the soybean protein fabric dyed with gallut showed reasonable results at 100% o.w.f, $90^{\circ}C$, for 60min. Fastness to washing according to concentration indicated good result as more than grade (4-5) in general. Fastness to light was almost the same compared to fastness to washing at all concentrations. Fastness to washing according to mordants indicated good grade (4) in principle at Al, Cu, and Fe; in addition, fastness to light indicated a good grade too. Fastness to light also indicated the highest dyeability at Fe mordant. This study shows that gallut is a reasonable dyestuff to soybean protein fabric and that it is possible to manufacture a variety of products that use soybean protein fabric.

• Textile Coloration and Finishing
• /
• v.3 no.4
• /
• pp.1-6
• /
• 1991

The influence of chemical structure of Benzopurpurine 4B and Congo Red on the color fastness properties of cotton fabric have been studied at $90^{\circ}C$. Each dyeing carried with $10\times10^{-6}M$ of dye concentration and 0.1 M of NaCl. The results obtained from this study were as follow; 1. The properties of fastness to washing by Benzopurpurine 4B were superior to those of Congo Red. 2. The properties of fastness to light by Congo Red were superior to those of Benzopurpurine 4B. 3. The color variation appeared more vividly in the case of Benzopurpurine 4B than Congo Red and the color shifted to Red Purple after washing test but to Yellow Red after Fade-O-meter test.

• The Korean Journal of Community Living Science
• /
• v.17 no.1
• /
• pp.79-86
• /
• 2006

This study purposes to find the best one for dyeing with artemisia in order to develop a more efficient method of dyeing with artemisia and investigates the antibiotic activities of artemisia. After dyeing cotton, rayon, silk, wool and nylon fabrics with dyebath extracted from artemisia, observation on dyeability by temperature, concentration and time has been carried out. And I took an observation on color change, color fastness to washing and color fastness to light after mordanting treatment. Also observation on the antibiotic properties of non-dyed fabrics, artemisia-dyed fabrics and artemisia-dyed fabrics with post-mordant has been performed to investigate the antibiotic activities of artemisia. And the following results have been obtained. 1. The dyeability of artemisia was better for protein fabrics such as silk or woo and amide-based synthetic fabrics like nylon than for cellulose fabrics such as cotton and rayon. 2. For all tested fabrics, the dyeability was increased as the concentration of artemisia dyebath, dyeing time and dyeing temperature was increased. Especially the dye ability for protein fabrics was most affected by the temperature, and high dyeability was obtained at high temperatures. 3. For the color fastness of artemisia-dyed fabrics with mordanting treatment, the color fastness to washing was good with grade of 4-5 while the color fastness to light ranged from grade 2 to grade 3, which requires improvement for practical use. 4. The artemisia-dyed fabrics were shown to have much higher antibiosis than the non-dyed fabrics, and the artemisia-dyed fabrics with mortanting treatment showed the following result; Cu 99.9%, Al 64% and bittern 64.7%.

• Textile Coloration and Finishing
• /
• v.25 no.1
• /
• pp.75-81
• /
• 2013

Colorimetric and wash fastness data after repeated wash cycles of Poly Lactic Acid(PLA) fiber were examined with C. I. Vat Blue 1, also other comparing 2 dyes (C. I. Vat Blue 35, C. I. Vat Blue 5), in this study. The fastness of three vat dyes on PLA fiber to repeated washing according to KS K 0430 A-2 regulation increased with dyeing temperatures. The $L^*$ values of the dyed material gradually increased with increasing numbers of wash. Also the f(k) values were decreased reversely. During repeated washing, the vagrant dyes were deposited especially on nylon, polyester, cotton of the adjacent multifiber. C. I. Vat Blue 5 displayed lowest color change to repeated washing of the three dyes used.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.3
• /
• pp.415-426
• /
• 2014

This study investigated the color change, enhancement of dye uptake, washing fastness, and light fastness of cotton and silk when dyed with Juniperus chinensis and Terminalia chebula (combination dyeing) using various methods. The dyeing methods were 1) dyeing Juniperus chinensis extract and Terminalia chebula Retzius extract sequentially (J-T), 2) dyeing Terminalia chebula Retzius extract and Juniperus chinensis extract sequentially (T-J), 3) dyeing Juniperus chinensis extract and Terminalia chebula Retzius extract simultaneously (J+T), and 4) dyeing Juniperus chinensis extract 4 times repeatedly and followed by a dyeing Terminalia chebula Retzius extract in sequence. In terms of increased dyeing uptake, combination dyeing (dyeing 2 times like method 1, 2, 3) had the same impact as the repeated dyeing (method 4). The color of J, T combination dyeing showed wide range of mixed YR series, Y series resulting from Terminalia chebula Retzius, and R series resulting from Juniperus chinensis. In cotton, J-T dyeing method showed superior enhancement of dye uptake, and T-J method in silk. In both of the cases, Y series color from Terminalia chebula Retzius extract was mainly shown (Y series color was superior to R series color after dyeing). Therefore, it is recommended for cotton to implement T-J method and for silk to implement J-T method in order to enhance both dyeing uptake and emphasize the color of R series. The K/S value of combination dyed fabrics was decreased by increasing washing time; however, the K/S value of combination dyed fabrics was increased by increasing UV irradiation time. But after repeated washing and longer UV irradiation, ${\Delta}E$ value of combination dyed fabric became smaller compared to fabric dyed with Juniperus chinensis only. Thus, it was found that after J, T combination dyeing, fabric became less prone to fading by washing and UV than after Juniperus chinensis single dyeing was done.

• The Korean Journal of Community Living Science
• /
• v.14 no.2
• /
• pp.125-130
• /
• 2003

To develop natural dyeing materials from the unused plant materials, we had several dyeing experiments to investigate the optimum conditions of dyeing fabrics with the dyebath extracted from wisteria. Dyeing experiments were done under different dyeing conditions of dyeing temperature, pH of dyebath, dyeing time, concentration of dyebath and mordant treatment which were treated after dyeing. Experimental fabrics were silk, wool, cotton, ramie and hemp. Color difference(ΔE) and Munsell's HV/C of the dyed fabrics and color fastness of silk and cotton fabrics to dry cleaning, washing, rubbing, perspiration and light were measured. In silk and wool fabrics(non mordant, dyeing time-20min), color differences increased in case of dyeing temperature of $100^{\circ}C$, but in cotton, ramie and hemp fabrics, color differences did not increase. Without mordant treatment, color differences of all experimental fabrics were about 10-20, so in wisteria dyeing mordant treatment was necessary. Color differences were increased by the mordant treatment; the color of dyed fabrics with Al mordant is dull yellow, Cu mordant is gold and Fe mordant is olive tone. Color difference was not affected by pH of dyebath in all experimental fabrics. On the whole, the color fastness of dyed silk and cotton fabrics were good, but color fastness to washing and perspiration in Fe mordant was weak and improved in Cu mordant.