• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.5
• /
• pp.517-523
• /
• 2003

We studied the physical properties of silk fabrics after degumming, the dyeability and the color fastness of silk fabrics after degumming and sericin fixing. As the sericin was removed from silk fabrics, the rate of weight loss increased and both the abrasion resistance and the drape coefficient decreased. This means that the amount of the sericin remained in silk fabrics significantly affects the physical properties of silk fabrics. On the surface and the cross-section of silk fabrics, the silk fibers enclosed by the sericin seemed to be in a lump shape. Each fibroin strand, however, got scattered, as the process of degumming went through. The dyeability of silk fabrics degummed decreased at between 20$^{\circ}C$∼80$^{\circ}C$ the dyeing temperature, on the other hand, it significantly increased over 80$^{\circ}C$. The dyeability of the sericin-fixed silk fabrics was lower than that of the non-serin-fixed silk fabrics, to a little extent. The colorfastness of crocking in the dyed-silk fabrics was a little low and that of the sweat was much lower in a basic sweat. Especially, the colorfastness of the partially degummed silk fabrics was low, because the sericin was not stable in the condition of sweat. Therefore, the process of sericin fixing is essentially required, for the partially degummed silk fabrics and the process of degumming itself.

• Journal of Fashion Business
• /
• v.23 no.4
• /
• pp.100-111
• /
• 2019

In this study, the dyeing properties and functionalities of Crataegi fructus extract were investigated for the purpose of application to new natural dye resources. The effects of dyeing conditions(concentration of dye, dye bath temperature, dyeing duration and dye bath pH) and mordanting on dye uptake and color changes were also examined. The study also estimated the colorfastness, antibacterial properties, and ultraviolet protection properties of the dyed and mordanted silk fabrics. The dye uptake increased in tandem with the dye concentration and dye bath temperature. The highest K/S values were obtained at the following conditions: a dye concentration of 100%(v/v), a dyeing period of 60 minutes, a dye bath temperature of $90^{\circ}C$, and a dyeing pH of 3. The colorfastness of the material when dry cleaned or rubbed ranged from good to excellent and fastness to light was rated at grade 2-3. The change in the color grade when exposed to washing was not good; however, the stain of washing fastness was good at a range of 4-5. In regards to the functional property aspects, the dyed and mordanted fabrics exhibited excellent results with a 99.9% reduction rate, and excellent ultraviolet protection factors.

• Journal of the Korean Home Economics Association
• /
• v.41 no.2
• /
• pp.107-121
• /
• 2003

This study was discussed the dyeing of wool and nylon fabrics with Chinese Scholar Tree extract. The extracts of Chinese Scholar Tree was prepared in the condition of heating at $95{\pm}5C$, for 1 hour and cooling to 40C. And then the extracts of color matter treate with vacuum concentration at $60{\pm}2^{\circ}C$, 30mmHg and dried with spray dryer. The dyeing of wool and nylon fabric in this experiment was also employed the mordant dyeing method such as pre-mordant, post-mordant and simultaneous mordant method. The mordanting agents used in this study were as followings ; aluminium potassium sulfate, copper(II) acetate monohydrate, chromium potassium sulfate$.$$7H_2O$, Tin(II) chloride dihydrate, iron(II)sulfate $7H_2O$. For an evaluation of the dyeing property of the mordanting agents, the pre-mordant method, the repeat dyeing and the fastness of the light, dry cleaning, washing and rubbing measured respectively. From the results of the dye absorption, the optimum dyeing condition of the wool and nylon fabrics with Chinese Scholar Tree extract is at 80C dyeing temperature for 60 minutes. The optimum concentration of mordanting agent is Al, Cr, Sn 1%, Fe, Cu 2% solution. In general, the fastness property of the dyed wool and nylon fabrics had a comparatively high grade.

• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.110-117
• /
• 2010

Recently, there is a trend to utilize natural dyes in many dyeing fields. In this work, the effects of benzyl alcohol in human hair dyeing with cochineal, a natural dye, was investigated. We investigated the K/S value and color value of dyed hair, water retention of dyed hair, protein release-ability of dyed hair, and wash fastness of dyed hair according to dyeing time and temperature. The shade of dyed hair was reddish. By adding benzyl alcohol in cochineal dyeing, the dyeing rate was increased and the dyeing equilibrium was established at early stage. The water retention of dyed hair was increased and the protein release-ability of dyed hair was decreased, meaning that the hair was less damaged during dyeing, The dyed hair showed a good wash fastness.

• Textile Coloration and Finishing
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2005

This study were carried out to investigate the effects of mordants and mordanting methods under the various dyeing conditions such as temperature, time, pH, repetition of dyeing in the silk fabrics with Petasites japonicus leaf. It was the most high K/S values of the silk fabrics dyed with Petasites japonicus leaf according to co mordanting and used cupric sulfate, ferric sulfate as mordanting agents. K/S values of the silk fabrics dyed with Petasites japonicus leaf were increased gradually with dyeing temperature, dyeing time, repetition of dyeing was higher and the optimum pH was pH 7. Silk fabrics were colored yellowish orange and surface color(munsell value) was changed from 8.3YR to 2.0Y by using mordanting agents and those of the silk showed high tone when mordanting with cupric sulfate but decolored and darked when mordanting with ferric sulfate. Washing fastness of silk fabrics were good in 4 ～ 5 grade, so washing fastness of the silk fabrics was significantly improved when washed with the neutral detergent.

• Journal of Environmental Science International
• /
• v.27 no.6
• /
• pp.457-466
• /
• 2018

The purpose of this study was to develop environmentally friendly black dye by comparing Ketapang and Gallnut, that have been traditionally used as a black dye. As a result of FT-IR and UV-Vis spectrophotometer analysis, Ketapang was characterized by condensed tannin, while Gallnut showed hydrolyzable tannin. Due to the dyeability characteristic analysis, the color fastness of the non-mordant dye was slightly lowered to grades 1-3. In the dry-cleaning fastness test, both non-mordant and iron mordant were excellent, in grade 4-5, and the daylight fastness was excellent grade 3-5 too. The $L^*$ values of Ketapang were 26.93 (pre-mordant) and 29.39 (post-mordant), which were higher than those of Gallnut, 41.90 (pre-mordant) and 43.02 (post-mordant), indicating that Ketapang was more easily colored as a black dye than Gallnut.

• Textile Coloration and Finishing
• /
• v.17 no.2 s.81
• /
• pp.1-9
• /
• 2005

Mixed dyeing were carried out ll"ing yellow, red and purple loess as mineral dyes verify their dyeability, color shade and fastness. The proper density of Chinese ink were 0.5, 1.0, 2.0, 2.5, $5\%$(o.w.b). The grinded chinese ink had better stainability compared with the general Chinese ink. The mixed dyeing improvement of stainability in the density of loess of $40\%$(o.w.b) among the yellow, red, and purple loess. The colors in the mixed dyeing with Chinese ink were $3.801\~8.13Y,\;0.128\~7.038Y\;and\;4.222\~9.304Y$. The colorfastness were 1-2 in the homogeneous dyeing with Chinese ink. It was improved 1-3 in the mixed dyeing. Light colorfastness of the homogeneous and mixed dyeing were excellent as a value of 5. The dry rubbing fastness in the homogeneous dyeing was 3-3.5, and 3 in the wet rubbing. As for the mixed dyeing, the dyes of Chinese ink showed poor diffusion into the fiber, resulting in low fastness due to the existence of the dyes on the surface.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.1
• /
• pp.117-123
• /
• 2014

This paper examined dyeing using sulfur dye with nylon and the characteristics of high gauge knitting for generating high functionality including light weight, wind resistance and elasticity using fine nylon threads. Yarn tension, stitch field and knitting speed of high and fine gauge knitting were measured. The influence of reducing agents on sulfur dye, optimum dyeing conditions and fastness features in nylon dyeing were analyzed. The analysis results are presented below. When nylon (Hyoseong, 40d/34f) and spandex (Hyoseong, 20d) for use as hosiery yarn were used to knit high gauge and flat weave, 44 gauge, the effective knitting conditions were a stitch field over 8.2cm in 1 course length, yarn tension of less than 5g and knitting speed below 18rpm. Nylon dyeing using sulfur dye showed effective results when a rongalite reducing agent was used at more than 10% o.w.f. and dyeing was maintained at $98^{\circ}C$ for 30 minutes. For dyeing nylon and spandex composite using sulfur dye, color fastness in washing, water, daylight and friction were higher than Class 4 or 5, which indicated a superior property. The analysis results verified that the existing problems in nylon dyeing could be solved by using sulfur dyes that don't use heavy metals due to superior fastness and therefore quality, high gauge nylon knit products could be produced.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.444-451
• /
• 2004

This study was carried out to investigate the chemical and dyeing properties of Petasites japonicus leaf extract under the various extracting and dyeing conditions such as temperature, time, the ratio of water and pH, repetition of dyeing in silk and cotton fabrics with Petasites japonicus leaf. The results were as follows: 1. It was found that λ$_{\max}$ of color solution extracted by Petasites japonicus leaf has two peaks at 290nm and 323nm. 2. The optimum extracting conditions were studied at 10$0^{\circ}C$, 40min., pH 7 and 1 : 20(the ratio of water and Petasites japonicus leaf), the optimum dyeing temperature, dyeing time, dyeing pH and repetition of dyeing were 10$0^{\circ}C$, 60min., pH 7, repetitions of three times, respectively. 3. Silk and cotton fabrics dyed with Petasites japonicus leaf extract were colored yellowish orange. The colory Petasites japonicus leaf extract in silk and cotton fabrics were deeped by same-mordanting with aluminum potassium sufate and cupric sulfate. 4. Washing fastness of silk fabrics was 4∼5 grade, but cotton fabrics was 3∼4 grade, so washing fastness of silk fabrics washed with neutral detergent was excellent.

• Textile Coloration and Finishing
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2006

Treatment of PET fabrics with alkali, chitosan and Al-mordanting has been carried out and the role of the chitosan coating in the dyeing process was clarified. The pre-treatment was effectively evaluated differences in dyeing behavior between its treated and untreated PET fabrics using wood of Caesalpinia sappan. The pre-treated on PET fabrics has been examined by SEM and evidence for the presence of chitosan sought using a air permeability test. Similar colour fastness by computer color matching(CCM) obtained on both untreated and pre-treated PET fabrics. The pre-treated PET was found to be of a deeper hue to that of its dyed untreated PET and, despite of its better colour depth, the wash fastness of the pre-treated dyeing was comparable to that of its dyed untreated PR. The application of chitosan or mordanting reveled that pre-treatment imparted to the PET additional functional groups that were available for coordination with the Brazilin.