• Journal of Korean Society of Environmental Engineers
• /
• 제28권10호
• /
• pp.1090-1097
• /
• 2006

The anoxic activated sludge process was applied to the treatment of industrial box-mill wastewater, which exhibited the high removal efficiencies of $90{\sim}94%$$ TCOD_{Mn}$ and $58{\sim}81%$ Color. For the design of industrial anoxic activated sludge process, Monod bio-kinetic coefficients of box-mill wastewater were estimated as follows: $K_{max}$(maximum specific substrate removal rate)=0.52 $day^{-1}$, $K_s$(half saturation constant)=314 mg/L, $K_d$(decay coefficient)=0.274 $day^{-1}$, y(microbial yield coefficient)=0.908 mg/mg, and ${\mu}_{max}$(maximum specific growth rate)=0.472 $day^{-1}$. Space loading factors for the design analysis were practically determined as the values of F/M ratio=$0.043{\sim}0.07$ kg-$TCOD_{Mn}$/kg-SS-day, BOD space loading=$0.18{\sim}0.3$ kg-$TCOD_{Mn}/m^3-day$, and ${\theta}_x=6.8{\sim}26.4$ day when considering the relationship of these loading factors with growth dynamics of microorganisms, the F/M ratio that is inversely proportional to ${\theta}_x$ should be equivalent to ${\mu}_{max}$ in units, but exhibited the significant difference between theses two values. Therefore, it is considered that high safety factors are requested in the design of anoxic activated sludge process that is based on Monod bio-kinetics of microorganism.

• Korean Institute of Interior Design Journal
• /
• 제23권5호
• /
• pp.174-182
• /
• 2014

As patients prefer large scale hospitals recently, the interior design of general hospitals are conspicuously improving. In the past, most patients visit hospitals to get treatment on diseases; however, recently patients visiting hospitals for the early prevention of disease is rapidly increasing. Accordingly, contemporary hospitals should meet the wish of patients who want to get medical service in more clean and comfortable environment. The existing studies on hospital interior design were mostly limited on analyzing the functionality of each space; however, studies on the interior design of common use space, which is open to all hospital users, are required now. Accordingly, this study classified the common use space in contemporary general hospitals into lobby space, corridor space, waiting space and resting space. The interior design characteristics of each space were classified into; connectivity with external environment, level change by void, introduction of natural elements, dynamics of space and variety of color. Then a case analysis was done by selecting 12 common use spaces in overseas general hospitals. According to the analysis result, the interior design characteristics were more conspicuous in the sequence of corridor space, lobby space, resting space and waiting space. The interior design elements such as overall space arrangement and material-finishing were relatively acceptable; however, the aspect of a user's environmental behavior, in other words, the psychological aspect, which can lead a patient to natural healing, was relatively insufficient. It is believed that an in-depth interior design focusing on practical users would enable various spatial behaviors. It is hoped that this study would be a help to the interior design of domestic general hospitals as a guideline.

• Journal of Navigation and Port Research
• /
• 제43권6호
• /
• pp.437-443
• /
• 2019

Aid to navigation is a navigational aid facility that informs a sailing vessel of its location and direction as well as a location of a specific obstacle by means of a light, shape, color, sound, radio wave, etc. It can be valuable in improving the safety of day and night vessel navigation at sea. For the safety of the tug boat, the minimum equipment requirements for each type of tug boat are arranged. Despite these preparations, the collision accidents between tug boats, barges, and light buoys can occur when the tug boat turns due to the length of the tow-line, tidal current, and the barge's momentum etc. The purpose of this study was to propose the basic system that analyzes the physical relationship between two vessels regarding the tug boat-barge-light buoy dynamics and propagate the corresponding data through the aid to navigation management & operation systems in use at each regional oceans and fisheries.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제39권12호
• /
• pp.1115-1123
• /
• 2011

This paper proposes an image processing algorithms for detection and tracking of aerial vehicles in short-range. Proposed algorithm detects moving objects by using image homography calculated from consecutive video frames and determines whether the detected objects are approaching aerial vehicles by the Probabilistic Multi-Hypothesis Tracking method(PMHT). This algorithm can perform better than simple color-based detection methods since it can detect moving objects under complex background such as the ground seen during low altitude flight and consider the characteristics of vehicle dynamics. Furthermore, it is effective for the flight test due to the reduction of thresholding sensitivity against external factors. The performance of proposed algorithm is verified by applying to the onboard video obtained by flight test.

• Fire Science and Engineering
• /
• 제31권2호
• /
• pp.44-51
• /
• 2017

Accurate predictions of the activation time for smoke detectors using a fire simulation is are required to ensure the reliability of the RSET (Required Safe Egress Time) calculation in the process of PBD (Performance-Based Design). The objective of this study was to enhance the accuracy of input parameters for the numerical models of smoke detector based on the FDS. To this end, a Fire Detector Evaluator (FDE) developed in previous studies was improved. The uniformities of flow and smoke inside the FDE were improved and accurate measurements of the obscuration per meter (OPM) related to detector operation were also performed through a decrease in the forward scattering of smoke particles. The input parameters using the improved FDE showed a significant difference from the previous FDE quantitatively. In particular, a larger difference was found in a photoelectric detector compared to an ionization detector. Considering that the operating conditions of smoke detectors are affected by the detector type, combustibles, smoke particulars, and color, the database (DB) on the input parameters for various detectors and combustibles should be built to improve the reliability of PBD in future studies.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.54-54
• /
• 2018

To optimize the deposition parameters of diamond films, the temperature, pressure, and distance between the filament and the susceptor need to be considered. However, it is difficult to precisely measure and predict the filament and susceptor temperature in relation to the applied power in the hot filament chemical vapor deposition (HFCVD) system. In this study the temperature distribution inside the system was numerically calculated for the applied powers of 12, 14, 16 and 18 kW. The applied power needed to achieve the appropriate temperature at a constant pressure and other conditions was deduced, and applied to actual experimental depositions. The numerical simulation was conducted using the commercial computational fluent dynamics software, ANSYS-FLUENT. To account for radiative heat-transfer in the HFCVD reactor, the discrete ordinate (DO) model was used. The temperatures of the filament surface and the susceptor at different power levels were predicted to be 2512 ~ 2802 K, and 1076 ~ 1198 K, respectively. Based on the numerical calculations, experiments were performed. The simulated temperatures for the filament surface were in good agreement with experimental temperatures measured using a 2-color pyrometer. The results showed that the highest deposition rate and the lowest deposition of non-diamond was obtained at a power of 16 kW.

• Proceeding of EDISON Challenge
• /
• 제4회(2015년)
• /
• pp.14-23
• /
• 2015

Alzheimer's disease is one of the most common types of degenerative dementia. As a considerable cause of Alzheimer's disease, neurotoxic plaques composed of 39 to 42 residue-long amyloid beta($A{\beta}$) fibrils have been found in the patient's brain in large quantity. A previous study found that erythrosine B (ER), a red color food dye approved by FDA, inhibits the formation of amyloid beta fibril structures. Here, in an attempt to elucidate the inhibition mechanism, we performed molecular dynamics simulations to demonstrate the conformational change of $A{\beta}40$ induced by 2 ERs in atomistic detail. During the simulation, the ERs bound to the surfaces of both N-terminus and C-terminus regions of $A{\beta}40$ rapidly. The observed stacking of the ERs and the aromatic side chains near the N-terminus region suggests a possible inhibition mechanism in which disturbing the inter-chain stacking of PHEs destabilizes beta-sheet enriched in amyloid beta fibrils. The bound ERs block water molecules and thereby help stabilizing alpha helical structure at the main chain of C-terminus and interrupt the formation of the salt-bridge ASP23-LYS28 at the same time. Our findings can help better understanding of the current and upcoming treatment studies for Alzheimer's disease by suggesting inhibition mechanism of ER on the conformational transition of $A{\beta}40$ at the molecular level.

• Fashion & Textile Research Journal
• /
• 제11권1호
• /
• pp.24-32
• /
• 2009

The purpose of this study is to understand characteristic of expression in Korean style fashion design and investigated Korean style fashion design's deployment and design idea method as well as its esthetic value. The photographs for the research were selected from fashion collections during S/S 2003-F/W 2007 by four specialists in the department of textile and then analyzed with 288 final data. The results were as followings. First, the characteristics of design expression in Korean style fashion design were formation by separating partial shape from the whole, formation by shape's separation and repetition, and connecting formation by combination and transformation of parts. In the case of color, they were direct expression, contrasting formative expression, and gradual changing expression. In the case of pattern, they were the methods of filling, filling & emptying, and partial filling. Second, the deployments of Korean style fashion design were adding modern elements to traditional things, combining traditional elements and modern things, and adding traditional elements to modern things. The third, Korean style fashion design's idea methods were weaving, snatching, adding, and changing. Fourth, it was shown that esthetic values of Korean style fashion design were the interactive organism by building organic relationship, the optimum expressing beauty with minimum elements, the palpitation having dynamics and rhythmical beauty.

• The Bulletin of The Korean Astronomical Society
• /
• 제46권2호
• /
• pp.50.1-50.1
• /
• 2021

The Gaia mission opens a new window to study the kinematics and dynamics of young stellar systems in detail. The kinematic properties of young stars provide vital constraints on the formation process of their host systems. Here, we present a kinematic study of the two associations Monoceros OB1 (Mon OB1) and R1 (Mon R1). Member candidates are first selected from the published list of member candidates, a compilation of OB star catalogues, and the classification of young stellar objects with the AllWISE data. According to the conventional wisdom, we selected a total of 728 members with similar proper motions at almost the same distance. Mon OB1 and Mon R1 have high levels of substructures that are also kinematically distinct. We identify six stellar groups in these associations, of which five show a pattern of expansion. In addition, the signature of rotation is found in two stellar groups of Mon OB1. Star formation history is inferred from a color-magnitude diagram. As a result, star formation in Mon OB1 has been sustained for several million years, while Mon R1 formed at almost the same epoch as the recent star formation in Mon OB1. Some old members in the outskirt of Mon OB1 have outward motions, which rules out the previously proposed outside-in star formation scenario. Star-forming regions including Mon OB1 and Mon R1 are found along a large arc-like gas structure. Hence, the formation of these two associations may originate from the hierarchical star formation along filaments in a turbulent molecular cloud.

• Economic and Environmental Geology
• /
• 제47권1호
• /
• pp.39-48
• /
• 2014

In coastal region, estuaries have complex environments where dissolved and particulate matters are mixed with marine water and substances. Suspended sediment (SS) dynamics in coastal water, in particular, plays a major role in erosion/deposition processes, biomass primary production and the transport of nutrients, micropollutants, heavy metals, etc. Temporal variation in suspended sediment concentration (SSC) can be used to explain erosion/sedimentation patterns within coastal zones. Remotely sensed data can be an efficient tool for mapping SS in coastal waters. In this study, we analyzed the variation in SSC in coastal water using the Geostationary Ocean Color Imager (GOCI) and Landsat Enhanced Thematic Mapper Plus (ETM+) in Gyeonggi-bay. Daily variations in GOCI-derived SSC showed low values during ebb time. Current velocity and water level at 9 and 10 am is 37.6, 28.65 $cm{\cdot}s^{-1}$ and -1.23, -0.61 m respectively. Water level has increased to 1.18 m at flood time. In other words, strong current velocity and increased water level affected high SSC value before flood time but SSC decreased after flood time. Also, we compared seasonal SSC with the river discharge from the Han River and the Imjin River. In summer season, river discharge showed high amount, when SSC had high value near the inland. At this time SSC in open sea had low value. In contrast, river discharge amount from inland showed low value in winter season and, consequently, SSC in the open sea had high value because of northwest monsoon.