• Journal of Broadcast Engineering
• /
• 제16권1호
• /
• pp.14-22
• /
• 2011

The conventional satellite image fusion methods usually add the same amount of higher frequency components extracted from the panchromatic image to all the multispectral images. However, it is noted that each of multispectral images has different amount of overlap with the panchromatic image in terms of its spectrum, and also has different intensities. Thus giving the same amount of high frequency contents to all the spectral bands does not match with this observation, which causes color distortion in the fused image. In this paper, we propose a new wavelet-domain satellite image fusion algorithm that can compensate for these differences in intensity and spectrum overlap. For the compensation of intensity differences, we first estimate the high resolution multispectral images from P, considering the relative intensity ratios. For the compensation of the amount of spectral overlap, their wavelet coefficients are appended to the conventional wavelet-domain method where the coefficients for the addition is determined by the amount of spectrum overlap. Experiments are conducted for the IKONOS satellite images whose spectrums are well known, and the results show that the proposed algorithm gives higher PSNR and correlation coefficients compared to the conventional methods.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• 제49권1호
• /
• pp.88-96
• /
• 2012

According to development of technology for media, observers try to watch the realities from images, as follows, 3D imaging has been extremely developed. 3D image gives depth in the image, observers feel in nature. Different image perception from left and right eyes make the 3D image. Anaglyph which is one of the ways to make an image of three dimensions is for obtaining an image of three dimensions by using color filter glasses. Anaglyph has a little amount of calculation and is easy to make, and it has a good point that anaglyph can be used in more wide field because it can create an image of three dimensions to the output of print like printed matter. However, the phenomenon of retinal rivalry can cause a feeling of fatigue because a difference of brightness of the left image and the right image happen. The way to reduce this problem is made by cutting down a difference of brightness. In the result, retinal rivalry can be reduced. We reduced a difference of the brightness of the left and the right image by utilizing the brightness and average of the original image to reduce retinal rivalry and we made better colors of anaglyph by using the way that we keep the hue caused by a change of brightness and supplement saturation about color distortion which is created at that time.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.182-185
• /
• 2005

Satellite cameras are calibrated before launch in detail and in general, but it cannot be guaranteed that the geometry is not changing during launch and caused by thermal influence of the sun in the orbit. Modem satellite imaging systems are based on CCD-line sensors. Because of the required high sampling rate the length of used CCD-lines is limited. For reaching a sufficient swath width, some CCD-lines are combined to a longer virtual CCD-line. The images generated by the individual CCD-lines do overlap slightly and so they can be shifted in x- and y-direction in relation to a chosen reference image just based on tie points. For the alignment and difference in scale, control points are required. The resulting virtual image has only negligible errors in areas with very large difference in height caused by the difference in the location of the projection centers. Color images can be related to the joint panchromatic scenes just based on tie points. Pan-sharpened images may show only small color shifts in very mountainous areas and for moving objects. The direct sensor orientation has to be calibrated based on control points. Discrepancies in horizontal shift can only be separated from attitude discrepancies with a good three-dimensional control point distribution. For such a calibration a program based on geometric reconstruction of the sensor orientation is required. The approximations by 3D-affine transformation or direct linear transformation (DL n cannot be used. These methods do have also disadvantages for standard sensor orientation. The image orientation by geometric reconstruction can be improved by self calibration with additional parameters for the analysis and compensation of remaining systematic effects for example caused by a not linear CCD-line. The determined sensor geometry can be used for the generation? of rational polynomial coefficients, describing the sensor geometry by relations of polynomials of the ground coordinates X, Y and Z.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• 제41권3호
• /
• pp.35-49
• /
• 2004

This paper proposes a new glasses removal method from color frontal facial image to generate gray glassless facial image. The proposed method is based on recursive PCA reconstruction. For the generation of glassless images, the occluded region by glasses should be found, and a good reconstructed image to compensate with should be obtained. The recursive PCA reconstruction Provides us with both of them simultaneously, and finally produces glassless facial images. This paper shows the effectiveness of the proposed method by some experimental results. We believe that this method can be applied to removing other type of occlusion than the glasses with some modification and enhancing the performance of a face recognition system.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 한국방송공학회 2010년도 하계학술대회
• /
• pp.220-223
• /
• 2010

최근 연이은 3D 영화의 성공에 힘입어 영화 산업계를 중심으로 3D 콘텐츠 생성이 늘고 있으며, 이를 가정 내에서도 즐길 수 있도록 다양한 3DTV가 출시되고 있다. 그러나 3DTV의 특성 상 3D 재생 시 밝기 저하에 따른 색 재현 문제로 인하여 입체감과 공간감을 느끼는 대신 2D에서의 화려한 색감을 만끽할 수 없게 되었다. 이에 본 논문은 3D 시청 시에도 2D에서와 같은 색감을 최대한 제공하기 위한 방법에 대해 연구하였다. 이를 위하여 3DTV를 활용하여 입력 RGB 영상에 대하여 2D와 3D 재생 시 재현되는 RGB intensity를 측정한 후 입출력에 따른 관계 모델링을 실시하였고, 모델링에 근거하여 3D 재생 시 2D 대비 보정되어야 할 색상 요소에 대한 매핑 테이블(mapping table)을 생성하였다. 생성된 매핑 테이블은 기존 3DTV 시스템의 출력부에 3D 색상 보정 모듈로써 추가하도록 하여 일반 2D 재생 시에는 입력영상이 바이패스(bypass)되도록 하고, 3D 재생 시에는 본 논문에 의한 3D 색상 보정용 매핑 테이블을 통해 색상 보정 과정을 수행하도록 하여 3D 재생 시에도 2D에서 느낄 수 있는 색감을 재현할 수 있도록 하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 한국컴퓨터정보학회 2011년도 제43차 동계학술발표논문집 19권1호
• /
• pp.37-38
• /
• 2011

본 논문은 상대적으로 대비도 차이가 크게 나타나는 역광 이미지에 대해서 Retinex 알고리즘을 적용하여 보정 했을 경우 발생하는 밝은 영역에서의 컬러 성분의 손실을 개선하기 위한 새로운 기법을 제안한다. 역광 이미지의 경우 밝은 영역과 어두운 영역에 대한 밝기 차이가 매우 크게 발생하기 때문에 Retinex 알고리즘을 이용하여 영상의 대비도를 향상시킬 경우 밝은 영역에서의 컬러 성분이 손실되는 현상이 발생한다. 이러한 손실을 보완하기 위해서 원본 영상의 밝은 영역에 해당하는 컬러 성분을 Retinex 알고리즘으로 보정된 영상에 추가해준다. Fuzzy c-means 군집화 알고리즘을 이용하여 원본 영상에서의 밝은 영역과 어두운 영역에 대하여 모든 화소의 소속 정도를 나타내는 퍼지 소속 함수를 구한다. 밝은 영역에 대해서의 컬러 성분은 원본 영상 값에 밝은 영역 퍼지 소속 함수를 적용하고, 어두운 영역에 대해서의 컬러 성분은 Retinex 복원 영상 값에 어두운 영역 퍼지 소속 함수를 이용한다. 제안하는 알고리즘의 성능 평가를 위해 역광 현상이 강하게 나타나는 자연영상들을 대상으로 적용하여 기존의 Retinex 알고리즘(MSRCR) 보다 우수한 성능을 가지고 있음을 보였다.

• Journal of the Korean Society for Precision Engineering
• /
• 제28권3호
• /
• pp.330-338
• /
• 2011

Odometry is the critical factor to estimate the location of the robot. In the mobile robot with wheels, odometry can be performed using the information from the encoder. However, the information of location in the encoder is inaccurate because of the errors caused by the wheel's alignment or slip. In general, visual odometer has been used to compensate for the kinetic errors of robot. In case of using the visual odometry under some robot system, the kinetic analysis is required for compensation of errors, which means that the conventional visual odometry cannot be easily applied to the implementation of the other type of the robot system. In this paper, the novel visual odometry, which employs only the single camera toward the ground, is proposed. The camera is mounted at the center of the bottom of the mobile robot. Feature points of the ground image are extracted by using median filter and color contrast filter. In addition, the linear and angular vectors of the mobile robot are calculated with feature points matching, and the visual odometry is performed by using these linear and angular vectors. The proposed odometry is verified through the experimental results of driving tests using the encoder and the new visual odometry.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.120-121
• /
• 2006

In this paper, We have designed a face recognition system based on the embedded Linux. This paper has an aim in embedded system to recognize the face more exactly. At first, the contrast of the face image is adjusted with lightening compensation method, the skin and lip color is founded based on YCbCr values from the compensated image. To take advantage of the method based on feature and appearance, these methods are applied to the eyes which has the most highly recognition rate of all the part of the human face. For eyes detecting, which is the most important component of the face recognition, we calculate the horizontal gradient of the face image and the maximum value. This part of the face is resized for fitting the eye image. The image, which is resized for fit to the eye image stored to be compared, is extracted to be the feature vectors using the continuous wavelet transform and these vectors are decided to be whether the same person or not with PNN, to miminize the error rate, the accuracy is analyzed due to the rotation or movement of the face. Also last part of this paper we represent many cases to prove the algorithm contains the feature vector extraction and accuracy of the comparison method.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제35권9호
• /
• pp.1099-1111
• /
• 2011

This study identified the types of consumer review information about apparel products based on consumer satisfaction/dissatisfaction with the availability/non-availability of consumer review information for online stores. Data were collected from 318 females aged 20s' to 30s', who had significant experience in reading consumer reviews posted on online stores. Consumer satisfaction/dissatisfaction with availability or non-availability of review information on online stores is different for information in regards to apparel product attributes, product benefits, and store attributes. According to the concept of quality elements suggested by the Kano model, two types of consumer review information were determined: Must-have information (product attribute information about size, fabric, color and design of the apparel product; benefit information about washing & care and comport of the apparel product; store attribute information about responsiveness, disclosure, delivery and after service of the store) and attracting information (attribute information about price comparison; benefit information about coordination with other items, fashionability, price discounts, value for price, reaction from others, emotion experienced during transaction, symbolic features for status, health functionality, and eco-friendly feature; store attribute information about return/refund, damage compensation and reputation/credibility of online store and interactive and dynamic nature of reviews among customers). There were significant differences between the high and low involvement groups in their perceptions of consumer review information.

• Journal of the Korea Furniture Society
• /
• 제22권3호
• /
• pp.230-238
• /
• 2011

Consumers' expenditure is getting larger on children due to their parents' compensation for increase of double-income family life and decrease of birth rate caused by high economic growth. Increase of demand on children items in the market leads the necessity of development of furniture for children. This study is aimed to design children chairs that meet the environment for children. In this study, the age of children is defined to be 5~7 years old. In order to investigate what causes environment change, this study covers roughly change of environment, change of learning program and use of environment-friendly material. In such scope, we drew out the factors that the chairs for children shall be equipped with. Case studies were done through such drawn factors. The scope of the furniture for children is limited to the chairs for children among the ones made in either Korea or overseas. As a result, we could draw out such keyword of the furniture as storage, mobility, environment-friendly, object style image, preferred color, functionality and safety, based on which we could plan the design and make the final result through high frequency round molding manufacturing process.