• Korean Journal of Remote Sensing
• /
• v.39 no.6_2
• /
• pp.1541-1551
• /
• 2023

Radiometric calibration is a fundamental step in ocean color remote sensing since the step to derive solar radiance spectrum in visible to near-infrared wavelengths from the sensor-observed electromagnetic signals. Generally, satellite sensor suffers from degradation over the mission period, which results in biases/uncertainties in radiometric calibration and the final ocean products such as water-leaving radiance, chlorophyll-a concentration, and colored dissolved organic matter. Therefore, the importance of radiometric calibration for the continuity of ocean color satellites has been emphasized internationally. This study introduces an approach to improve the radiometric calibration algorithm for the visible bands of the Geostationary Ocean Color Imager-II (GOCI-II) satellite with a focus on stability. Solar Diffuser (SD) measurements were employed as an on-orbit radiometric calibration reference, to obtain the continuous monitoring of absolute gain values. Time series analysis of GOCI-II absolute gains revealed seasonal variations depending on the azimuth angle, as well as long-term trends by possible sensor degradation effects. To resolve the complexities in gain variability, an azimuth angle correction model was developed to eliminate seasonal periodicity, and a sensor degradation correction model was applied to estimate nonlinear trends in the absolute gain parameters. The results demonstrate the effects of the azimuth angle correction and sensor degradation correction model on the spectrum of Top of Atmosphere (TOA) radiance, confirming the capability for improving the long-term stability of GOCI-II data.

• Journal of the Optical Society of Korea
• /
• v.5 no.1
• /
• pp.9-15
• /
• 2001

The ocean Scanning Multi-spectral Imager (OSMI) is a payload on the KOrea Multi-Purpose SATellite (KOMPSAT) to perform worldwide ocean color monitoring f the study of biological oceanography. OSMI performs solar and dark calibrations for on-orbit instrument calibration. The purpose of the solar calibration is to monitor the degradation of imaging performance for each pixel of 6 spectral bands and to correct the degradation effect on OSMI image during the ground station date processing. The design, the operation concept, and the radiometric characteristics of the solar calibration are investigated. A linear model of image response and a solar calibration radiance model are proposed to study the instrument characteristics using the solar calibration data. The performance of spectral responsivity and spatial response uniformity. The first solar calibration data and the analysis results are important references for further study on the on-orbit stability of OSMI response during its lifetime.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.31 no.1
• /
• pp.15-37
• /
• 2013

Split digital printing into interior and outdoors on present advertisement. When is printing machine for interior mainly, use ink of water-based type. Equipment of this type embodies high resolution, but ink special quality light stability is weak. Also, when is printing machine for outdoors, printing machines of solvent or UV type are used because of water resistance and light stability. This printing machines hard to embody ink special quality high resolution mainly. And because outside is far visibility range, is uncommon in case high resolution requires embodiment. Therefore, high resolution of inside is water-based type considering this item and outside printing machine of low resolution solvent type mainly announce. Also, divide into eco-friendly latex ink type that is announced to water-based, solvent, UV according to ink type and the latest market using in occasion of digital printing machine used as advertisement industry. Color management that is been consistent of original image has a lot of difficulties by using substrate that is also various to digital printing machine for such various advertisement. But, consumers is rising realization about color or desire about quality improvement of color gradually in interior outside advertisement market. So, require solution method. Therefore, in this paper, eco-friendly ink use applied device calibration through linearization in done latex digital printing machine to basis. And studied right color management plan of digital printing for interior outside advertisement through three steps such as G7 calibration application and ICC profile application.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.60-63
• /
• 2006

Geostationary Ocean Color Imager (GOCI) is under development to provide a monitoring of oceancolor around the Korean Peninsula from geostationary platforms. It is planned to be loaded on Communication, Ocean, and Meteorological Satellite (COMS) of Korea. In this paper radiometric calibration concept of the GOCI is introduced. The GOCI radiometric response is modeled as a nonlinear system in order to reflect a nonlinear characteristic of detector. In this paper estimation approaches for radiometric parameters of GOCI model are discussed. For the GOCI, the offset signal depends on each spectral channel because dark current offset signal is a function of integration time which is different from channel to channel. The offset parameter can be estimated by using offset signal measurements for two integration time setting is described.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.49.2-49.2
• /
• 2018

Flux calibration for narrow band photometric data gives us an opportunity to get a line flux of extended targets. We developed flux calibration processes for narrow band photometry using broad band filters as a continuum indicator. We derived parameters for color correction and zero point correction including color terms. Applying our method, we successfully subtracted continuum emissions and calibrated the emission lines from an FU Ori type object, V960 Mon.

• Journal of The Korean Astronomical Society
• /
• v.20 no.2
• /
• pp.63-94
• /
• 1987

Using many homogeneous data of DDO and UBV colors for all luminosity classes and physical quantities known from spectroscopic observations, new calibration schemes with DDO photometric parameters are presented for metal abundance, effective temperature and surface gravity of stars. And an intrinsic color relation is derived for the reddening estimate.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.183-195
• /
• 2004

Photogrammetry is one of the most important sources of GIS application. Nowadays, color photos are used and camera is integrated with GPS/INS sensors. However the photos are still taken from analogue camera and scanned for digital image. For the convenient and accurate image application especially for 3D, airborne digital camera images is essential. In this paper, digital image calibration process with GPS/INS and its accuracy evaluation was presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.475-478
• /
• 2004

In this paper, we describe a powerful solution for efficient LED wall calibration through the use of a quality 2D-luminance meter : the MURATest and a dedicated applicative software. The intended calibration allows adjusting individually the intensity of each LED so as to obtain a good uniformity on the module. Furthermore the intensity of each module can be adjusted one to the others so as to obtain a good uniformity on a complete display and maintain it even after module exchange for display maintenance needs.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.101-103
• /
• 2005

Vicarious calibration method using MODIS-derived surface reflectivity data as inputs to a radiative transfer model have been developed for the planned COMS solar channel. Pilot test was conduced over the Simpson Desert targets in Australia. Results suggested that calibration can be achieved within $5\%$ error range.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.784-786
• /
• 2004

프로젝션 화면(projection display) 상에 보여지는 가상의 물체를 사용자가 직접 조작할 수 있는 인터페이스를 제공하기 위해서는 전경 물체를 검출해내는 과정이 필수적이다. 이전의 색상 정보만을 이용하는 방법은 몇 가지 제약 조건을 가지고 있었다. 본 논문은 색상 보정 (color calibration)과 스테레오 정보(stereo information)를 이용하여 프로젝션 화면 내의 전경물체를 검출하는 방법을 제안한다. 실험에서는 프로젝터를 통해 책상 표면에 투사되는 영상과 일반 캠코더를 통해 얻어진 영상 사이의 왜곡을 기하 왜곡과 색상 왜곡으로 정의하여 모델링 하였고, 스테레오 정보를 이용하여 얻어진 최종 결과를 통해 제안된 방법의 실효성을 입증할 수 있었다.