• The Research Journal of the Costume Culture
• /
• v.22 no.2
• /
• pp.339-345
• /
• 2014

This study analyzes and compares Hanji made with loess to Hanji made with kaolin, two yellow-based inorganic pigments, in terms of its physical properties, optical properties, and color fastness to light with the aim of using it as a fashion material. Hanji made by adding inorganic pigments showed an approximately 20% retention ratio on average. This figure was similar to those of loess and kaolin. Physical properties were analyzed, with the following results. A higher amount of additives lowered the apparent density and increased thickness and bulk. In general, inorganic pigment-added Hanji had lower tensile strength, bursting strength, and folding endurance compared to non-additive Hanji. The analysis of optical properties showed a lower brightness index for Hanji made with inorganic pigments compared to non-additive Hanji. When comparing the two inorganic pigments, the brightness of Hanji made with kaolin was higher. Regarding color fastness to light, loess showed level 4 and kaolin showed level 5 when 25% inorganic pigments on pulp were added to Hanji. Thus, Hanji made by adding inorganic pigments during the manufacturing process may perform well as materials for fashion because the additives enhanced both the color fastness to light and the bulk while maintaining the strength. In addition, Hanji dyed with inorganic pigments may have the potential to serve as materials for the fashion industry while still retaining the characteristics of Hanji.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.2
• /
• pp.101-109
• /
• 2002

Samples of enamel wear for kitchen works were made at the Kordco Enamel Co. We analyzed the colors of enamel wears with Color Meter (JS555). The colors of enamel wears could be controled by mixing ratio of frits and pigments. Many kinds of frits and pigments were tested, and colors of enamel wears could be changed by variable frits. Colors were weakly changed by several mixing ratio of pigments.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.547-553
• /
• 2006

To know the effect of pigments on the material properties of color concrete, mortar and concrete tests were carried out by the using 5 kinds of pigment. The major component of red, yellow and black pigments was iron oxide and coloring component of blue and green pigments was copper phthalocyanine. Properties of mortar and concrete were some of difference according to adding ratio and kind of pigments. In case of using red, yellow and black pigments, setting time of concrete speeded a little and compressive strength was tendency to increase and slump or air content of concrete was same or decreased. On the other hand, in case of using green and blue pigments, compressive strength of concrete decreased largely because of the excessive air entrainment of surfactant and sump or air content of concrete increased highly. When the antifoaming agent was added to the color concrete mixed with green and blue pigments, compressive strength of concrete was improved and similar to that of concrete without pigment.

• 보존과학연구
• /
• s.28
• /
• pp.121-147
• /
• 2007

A large variety of mineral pigments has been used for Korean paintings and it has known that organic pigments have been used together on the Buddhist painting and the portrait. Haehakbando-do, which is from Honolulu Academy Museum in the United States, 12-fold screen was commissioned by Court of the late Joseon Dynasty in order to pray for the King's longevity. Therefore, it seems that all material used including pigments were selected very carefully and a great deal of technical effort was gone into its process. The purposes of this research were to estimate the pigments and the contributory elements of each color used on Haehakbando-do, in accordance with the conservation treatment carried out by Gochang Conservation Institute throughout last year. Without extracting sample, property of pigment was measured by nondestructive method, X-ray spectral analysis, and by comparing with the data about ancient pigments. In spite of the limited range of pigment analysis by nondestructive method, it should be noted that this method would not cause damage to the cultural properites. White pigment was found in all colored parts except the background, so it can be suggested that white color was used as a grounding of other color pigments. This would be flake white[$2PbCO_3{\cdot}Pb(OH)_2$] as Pb was found. Pb was the only element could be found in yellow, however, it can be organic pigment like Gamboge as same as background. Red would be Cinnabar (HgS) as hydrargyrum (Hg) was detected. For the light purple in cloud, organic pigments were probably used since any element is not detected except for Pb, which is used for background. It is possible that green color is the mixture of Malachite[$CuCO_3{\cdot}Cu(OH)_2$] and Azurite [$2CuCO_3{\cdot}Cu(OH)_2$], which share Cu as their main element. Azurite[$2CuCO_3{\cdot}Cu(OH)_2$] was used for bluish pigments. Black is carbon compound. For gold, solid gold (Au) was detected. It shows that gold was gilded on the flake white background. Red painted on the frame of screen was identified as Cinnabar (HgS) and the gold pattern was solid gold (Au). The supporting leg of folding screen was made of brass because both copper and zinc were detected. In conclusion, white pigment was used as grounding of all colors of Haehakbando-do, and specific pigments were used for each color. Additionally, result from the analysis of several pigments shows that mineral pigment and organic pigment, or different mineral pigments were mixed to make various colors.

• Food Science and Biotechnology
• /
• v.18 no.3
• /
• pp.682-688
• /
• 2009

Changes in lipophillic pigments concentration and its relation to color of fresh green tea liquor during heat treatment were studied. The results showed liquor greenness decreased markedly with extension of incubation time at $55^{\circ}C$, while the brightness and yellowness changed a little. Significant increase in 'a' and 'b' values of tea liquor was observed at $95^{\circ}C$. Color change of liquor at $55^{\circ}C$ was accompanied by a decrease in the level of chlorophylls, lutein and neoxanthin, and an increase in the pheophytins and ${\beta}-carotene$ levels. However, all pigments except ${\beta}-carotene$ decreased with time extension at $95^{\circ}C$. Significant correlation was found between pigments and color difference index. The browning of fresh green tea liquor was attributed to vicissitudes of lipophillic pigments during heat treatment, especially to the change of chlorophylls/pheophytins ratio. Result also showed addition of $Zn^{2+}$ at 1.6 ${\mu}mol/L$ could partially alleviate the decrease in greenness during heat treatment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.3
• /
• pp.32-38
• /
• 2000

This study was carried out to determine the effect of the type of plastic pigment on the coat-ing structure and printability of coated paper. Three kinds of plastic pigments(solid-bead type binder type and hollow type) were used for hti purpose. IN this research it was observed that particle shape and structure of plastic pigment had influenced the rheology of coating color the state of packing and the properties of coated paper. Inorganic pigments used in this research were platelike kaolin clay and rhombic calcium carbonate. Three kinds of plastic pigments were blended with two inorganic pigments respec-tively. The combination of pigments were carried out(1) to determined the effect of particle structure of plastic pigment on the state of dispersion of coating color(2) to observe the effect of calendering temperature on the property of coated paper prepared with different plastic pigments. The data indicated that binder and hollow type plastic pigment gave the best results in improving the properties of coated paper such as paper gloss opacity and air pet-meability.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04a
• /
• pp.1-6
• /
• 1999

A study was made to determine the effect of plastic pigment on the coating structure and printability of coated paper. Three basic plastic pigments were investigated such as solid-bead type of plastic pigment, binder type of plastic pigment and hollow type of plastic pigment. In the systems investigated, it was observed that particle shape and structure of plastic pigment had influenced on the rheology of coating color, the state of packing, and the properties of coated paper. The materials investigated were restricted to plastic pigments commonly uesd in paper coating formualtion. Inorganic pigments used in this research were kaolin clay which is platelets and calcium carbonate which is rhombic. Three kinds of plastic pigments were blended in the color made up with two inorganic pigments, respectively. The combination of pigments were carried out (1) to determined the effect of paticle structure of plastic pigment on the state of dispersion of coating color, (2) to observe the effect of temperature of calender on the property of coated paper prepared with plastic pigment. The data indicated that binder and hollow type of plastic pigment had the best results on improving the properties of coated paper such as paper gloss, opacity and air permeability ect. and solid-bead type of plastic pigment in the next place.

• Journal of the Korean Ceramic Society
• /
• v.45 no.5
• /
• pp.256-262
• /
• 2008

$ZnAl_{1-x}\;Cr_xO_4$ solid solutions were synthesized as pink pigments with and without mineralizer. The pigments were examined to optimize color development conditions of temperature and $Cr_2O_3$ contents. The characteristics of synthesized pigments were analyzed by XRD, XPS, FT-IR and UV-vis spectrophotometer. While samples without mineralizer fired at $1300^{\circ}C$, showed $ZnAl_2O_4$ and $ZnCr_2O_4$ spinel in XRD analysis. While samples with mineralizer resulted in $ZnAl_2O_4$. As a results, the pigments show pink color and most effective pink color was obtained at X=0.15 and $1250^{\circ}C$ when mineralizer was used. The chromatic coordinates are $L^*$ 58.61 $a^*$ 24.48, and $b^*$ 9.60.

• Korean Journal of Materials Research
• /
• v.21 no.9
• /
• pp.515-519
• /
• 2011

The purpose of this study was to determine the optimal firing condition and composition for $Al_2TiO_5$ crystal, which is suitable for stable coloration in glazes at high temperatures, using $Cr_2O_3$ as chromophore for the synthesis of $Al_2TiO_5$ system pigments. $Al_2TiO_5$ has a high refractive index and good solubility of chromophore in the $Al_2TiO_5$ lattice, making this structure a good candidate for the development of new ceramic pigments. Pigments were synthesized by using $Al_2O_3$ and $TiO_2$ mainly. Various amounts of $Cr_2O_3$ such as 0.01, 0.02, 0.03, 0.04 and 0.05 mole were also added. Each compound was synthesized at $1300^{\circ}C$, $1400^{\circ}C$, and $1500^{\circ}C$ for 2 hours and cooled naturally. The crystal structure, solubility limit, and color of the synthesized pigments were analyzed by XRD, SEM, Raman spectroscopy, UV and UV-vis. The changes in color as the result of applying 6 wt% of the synthesized pigments to lime barium glaze were expressed as CIE-L*a*b* values. A $Cr_2O_3$ 0.03 mole doped $Al_2TiO_5$ brown pigment was successfully synthesize at $1400^{\circ}C$, and the values of CIE-L*a*b* parameters were L* = 44.62, a* = 3.10, and b* = 17.25. In the case of the pigment synthesized at $1500^{\circ}C$, the brown color was obtained at 0.01 mole and 0.02 mole $Cr_2O_3$, and the CIE-L*a*b* values were 55.34, 1.73, 28.64, and 49.39, 0.51, 21.33, respectively. At $1500^{\circ}C$, the maximum limit of solid solution was 0.03 mole $Cr_2O_3$. The glazed sample showed green color, and the values of the CIEL* a*b* parameters were L* = 45.69, a* = -0.98, and b* = 20.38.

• Journal of the Korean Ceramic Society
• /
• v.45 no.4
• /
• pp.214-219
• /
• 2008

The zirconia ceramics are widely used because of their excellent mechanical properties. Recently, many researches to make a colored zirconia was achieved to satisfy the individual aesthetic requirements. In this study, the synthesis of black-color spinel-based inorganic pigments which are stable above $1400^{\circ}C$ and the fabrication of black-colored zirconia using the synthesized pigments are investigated. Inorganic pigments which have spinel structure and near black color were synthesized by a solid state reaction method using a $Fe_2O_3,\;Cr_2O_3$, CoO and NiO powder as a starting materials at $1600^{\circ}C$. Most of synthesized pigments were black colored spinel phases and single spinel phase was successfully synthesized at the composition range of $Cr_2O_3:25{\sim}35%,\;Fe_2O_3:45{\sim}55%$, CoO:20% and NiO:$6{\sim}10%$. The black-colored zirconia was fabricated at $1410^{\circ}C$ with the 5 wt% synthesized pigments and their properties were evaluated. The results showed that the strength value was more than 848 MPa, absorption rate was 0.1%, the brightness of color was $L^*:40{\sim}42$, the tone of color is $a^*:0.2{\sim}0.8$ and $b^*:-1.1{\sim}2.4$. As a result, the black-colored zirconia was suitable for a artificial jewelry or decoration zirconia goods.