• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.1
• /
• pp.39-45
• /
• 2012

In the standard CFD code, Lagrangian-Eulerian method is very popular to simulate the liquid spray penetrating into gaseous phase. Though this method can give a simple solution and low computational cost, it have been reported that the Lagrangian spray models have numerical grid dependency, resulting in serious numerical errors. Many researches have shown the grid dependency arise from two sources. The first is due to unaccurate prediction of the droplet-gas relative velocity, and the second is that the probability of binary droplet collision is dependent on the grid resolution. In order to solve the grid dependency problem, the improved spray models are implemented in the KIVA-3V code in this study. For reducing the errors in predicting the relative velocity, the momentum gain from the gaseous phase to liquid particles were resolved according to the gas-jet theory. In addition, the advanced algorithm of the droplet collision modeling which surmounts the grid dependency problem was applied. Then, in order to validate the improved spray model, the computation is compared to the experimental results. By simultaneously regarding the momentum coupling and the droplet collision modeling, successful reduction of the numerical grid dependency could be accomplished in the simulation of the high-pressure injection diesel spray.

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.24-32
• /
• 2010

Slotted-ALOHA and Binary-tree method are researched for the anti-collision for RFID system. However, it is required of the rapid recognition time for all tags and the reduction of the system complexity. In this paper. the hybrid anti-collision method is proposed to solve the problems. The RFID reader with the hybrid anti-collision method groups the tags with the number which makes the maximum system throughput, then it reads each group by slotted-ALOHA method. By the computer simulation results, it is found that the hybrid method improves the tag identification time and the system throughput together with the comparison to other anti-collision methods. Therefore, the proposed hybrid anti-collision method will enhance the RFID system performance.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.3
• /
• pp.78-85
• /
• 2021

Recently a traffic accident of heavy duty vehicles under the mandatory installation of ADAS (Advanced Driver Assistance System) is often reported in the media. Heavy duty vehicle accidents are normally occurring a high number of passenger's injury. According to report of Insurance Institute for Highway Safety, FCW (Forward Collision Warning) and AEB (Automatic Emergency Braking) were associated with a statistically significant 12% reduction in the rate of police-reportable crashes per vehicle miles traveled, and a significant 41% reduction in the rear-end crash rate of large trucks. Also many countries around the world, including Korea, are studying the effects of ADAS installation on accident reduction. Traffic accident statistics of passenger vehicle for business purpose in TMACS (Traffic safety information Management Complex System in Korea) tends to remarkably reduce the number of deaths due to the accident (2017(211), 2018(170), 2019(139)), but the number of traffic accidents (2017(8,939), 2018(9,181), 2019(10,095)) increases. In this paper, it is introduced a traffic accident case that could lead to high injury traffic accidents by being equipped with AEB in a bus. AEB reduces accidents and damage in general but malfunction of AEB could occur severe accident. Therefore, proper education is required to use AEB system, simply instead of focusing on developing and installing AEB to prevent traffic accidents. Traffic accident of AEB equipped vehicle may arise a new dispute between a driver's fault and vehicle defect. It is highly recommended to regulate an advanced event data recorder system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.1
• /
• pp.1-8
• /
• 1999

During the last 10 years, the various type of high speed craft have been greatly developed, and since around of 1990 the large size of high speed passenger and/or cargo vessels are also introduced and took into the service in the various routes over the world. In a marine traffic way some bridge need to build across a rivers, cannals or a waterways. This one will be an obstruction and potential risk of collision in the way of high speed craft. Accordingly some of collision accident have been reported, which were caused by a lost control, wind and hydrodynamic forces, fog or human errors. In this paper a high speed craft having 40 m length is assumed to be collided with a circular type of bridge piers at right angle. The mode of deformation, penetration depth of collapse, impact forces, reduction of speed, loss of kinetic energy, and influence of scantlings, etc. have been calculated in each speed with a time variation to find a maximum values within a limit, and are graphically presented.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.675-682
• /
• 2015

Current design codes such as AASHTO LRFD or Korean Highway Bridge Design Code recommend of using static force for designing bridge column against vehicle collisions. However, there was an accident that the bridge was collapsed shortly after vehicle impact on bridge pier in Nebraska(near Big Spring, 2003). It was found that the second largest cause of bridge collapse is collision after hydraulic causes. It can be thought that the possibility of truck-bridge collision are getting increasing as the size of truck increases and traffic condition are becoming improved. However, dynamic behavior under the impact loading seldom considered in bridge design procedure due to computational cost and time. In this study, in order to reduce the computational cost for dynamic impact analysis, model reduction method was developed. Obtained results of residual displacement were compared with the results of direct impact simulations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.17-22
• /
• 2013

If we were in a head-on or crossing situation with a target ship and did not know the target ship's intention to change her course, we might be confused about our decision making to change our course for collision avoidance and be in a danger of collision. In order to solve these problems, we need to develop an automatic system which enables mariners to easily detect a change in the target ship's course and efficiently avoid being on a collision course. In this paper, we proposed an early detection method on altering course of a target ship using the steering wheel signal. This method will contribute to the reduction of collision accidents and also be used to the VTS system and the analysis of marine accidents.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.5
• /
• pp.69-79
• /
• 2014

This paper proposes the Collision Prevention System based on Fuzzy which reasons a risk with the location information of vehicles and pedestrians and prevents collision between vehicles, and between a vehicle and a pedestrian with the reasoned risk. The proposed system provides three functions. First, it identifies a pedestrian's location with his smart phone and a vehicle's location with the GPS equipped in the vehicle. and transfers the identified information to their neighbors. Second, it makes a vehicle and a pedestrian reason a risk by considering a moving direction, a moving speed and road information. Third, it provides a vehicle and a pedestrian with the reasoned information such as route detour, speed reduction, etc. Therefore, the proposed collision prevention system based on Fuzzy not only prevents collision accidents beforehand by reasoning a risk, but also reduces a variety of losses by protecting traffic accident and congestion.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.29-54
• /
• 2005

Consolidation of ceramic particles at room temperature. Reduction of crystallite size and formation of nano-crystalline. Applicable to Integrate functionalceramic materials with metals and Si structure and to fabricate MEMS devises

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.430-436
• /
• 2017

The most frequent occurring and the serious marine casualties in fishing vessels are the collision in statistics from Korea Maritime Safety Tribunal (2008-2015). Collisions are is given a great deal of weight in all marine casualties, and the main cause of collisions is the negligence of watching. From this point of view, this study deals with the collision and its immediate cause, the negligence of watching which are main factors on the indirect causes. Basic analyzing data was gathered from the questionnaire made by experts of sea service part, and analyzed by using the fault tree analysis (FTA). From the result of the study, the occurrent probability of the negligence of watching in the collision due to the indirect causes occupied 64.9%, and its probability caused by the man factors was less than the other factors; i.e. the media factors and the management factors. For the reduction of the negligence of watching in the collision from this study, it needs an effort to remove not only the man factors, but also the media factors and management factors.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.396-408
• /
• 2019

The tubes which are applied in jacket platforms as the supporting structure might be collided by supply vessels. Such kind of impact will lead to plastic deformation on tube members. As a result, the ultimate strength of tubes will decrease compared to that of intact ones. In order to make a decision on whether to repair or replace the members, it is crucial to know the residual strength of the tubes. After being damaged by lateral impact, the simply supported tubes will definitely loss a certain extent of load carrying capacity under uniform axial compression. Therefore, in this paper, the relationship between the residual ultimate strength of the damaged circular tube by collision and the energy dissipation due to lateral impact is investigated. The influences of several parameters, such as the length, diameter and thickness of the tube and the impact energy, on the reduction of ultimate strength are investigated. A series of numerical simulations are performed using nonlinear FEA software LS-DYNA. Based on simulation results, a non-dimensional parameter is introduced to represent the degree of damage of various size of tubes after collision impact. By applying this non-dimensional parameter, a simplified formula has been derived to describe the relationship between axial compressive residual ultimate and lateral impact energy and tube parameters. Finally, by comparing with the allowable compressive stress proposed in API rules (RP2A-WSD A P I, 2000), the critical damage of tube due to collision impact to be repaired is proposed.