• International Journal of Automotive Technology
• /
• 제3권2호
• /
• pp.79-88
• /
• 2002

Emergent Collision Avoidance Systems (CAS's) are beginning to assist drivers by performing specific tasks and extending the limits of driver's perception. As CAS's evolve from simple systems handling discrete tasks to complex systems managing interrelated driving tasks, the risk of failure from hidden causes greatly increases. The successful implementation of such a complex system depends upon a robust software architecture. Host of the difficulty in implementing system arises from interconnections between the components. The CAS architecture presented in this paper focuses on these interconnections to mitigate this problem. Moreover, by constructing the GAS architecture through the composition of existing architectural styles, the resulting system will exhibit predictable qualities. Some of the qualities represent limitations that translate into constraints on the system. Others are beneficial aspects that satisfy stakeholder requirements .

• 해양환경안전학회지
• /
• 제22권1호
• /
• pp.98-107
• /
• 2016

본 연구는 인적오류 예방을 위해 선박 충돌위험 가능성이 높은 여섯 가지 선박조우상황(Head on, $045^{\circ}$, $090^{\circ}$, $135^{\circ}$, Overtaking, Overtaken)에 대해서 양 선박의 거리가 점차 감소될 때 항해 당직자가 느끼는 충돌위기체감지수(Collision Risk Perception Index, CRPI)를 획득하고 통계분석을 통하여 신뢰도분석 및 가설을 검증한 후 곡선근사과정을 통해 다항 계수로 모델링하는 것이 목적이다. 해상에서 실제 경비함 두 척과 항해당직 승조원 총 30명을 대상으로 CRPI 데이터 획득 실험을 하였으며 데이터 분석결과 각 조우상황에서 높은 신뢰도를 나타냈고 유의미한 결과를 나타냈다. 또한 타 선박 조우시 양 선박간 거리가 가까워지는 상황에서 항해당직자의 승선경력과 연령이 많고, 상위면허를 보유 할수록 CRPI에 음(-)의 영향을 미친다는 것을 알았다. 또한 3차 다항식 모델로 CRPI를 추정한 결과 평균제곱오차(RMSE)는 Head on에서 1.19, $045^{\circ}$에서 0.87, $090^{\circ}$에서 0.81, $135^{\circ}$에서 0.71, Overtaking에서 1.29, Overtaken에서 0.87로 나타나서 CRPI 곡선근사가 유용함을 알았다.

• 자동차안전학회지
• /
• 제5권1호
• /
• pp.44-49
• /
• 2013

This paper presents a lateral collision risk index between an ego vehicle and a rear-side vehicle. The lateral collision risk is designed to represent a lateral collision risk and provide the appropriate threshold value of activation of the lateral collision management system such as the Blind Spot Detection(BSD). The lateral collision risk index is designed using the Time to Line Crossing(TLC) and the longitudinal collision index at the predicted TLC. TLC and the longitudinal collision index are calculated with the signals from the exterior sensor such as the radar equipped on the rear-side of a vehicle and a vision sensor which detects the distance and time to the lane departure. For the robust situation assessment, the perception of driving environment determining whether the road is straighten or curved should be determined. The relative motion estimation method has been proposed with the road information via the integrated estimator using the environment sensors and vehicle sensor. A lateral collision risk index was composed with the estimated relative motion considering the relative yaw angle. The performance of the proposed lateral collision risk index is investigated via computer simulations conducted using the vehicle dynamics software CARSIM and Matlab/Simulink.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2009년도 춘계학술대회 미래 IT융합기술 및 전략
• /
• pp.190-195
• /
• 2009

자동차 이용자 수가 증가 할수록 자동차 사고로 인한 피해도 많이 늘어나고 있다. 이러한 자동차 사고를 사전에 예방하기 위해서는 운전자의 상태 및 현재 차량 상태를 파악하여 사고를 미리 방지함으로서 운전자의 안전을 보조할 수 있는 시스템이 필요하다. 본 연구에서는 안전운전을 보조하기 위하여 졸음운전 여부 감지 시스템, 후진시 후방 안전거리를 감지하는 시스템, 쾌적한 운전 환경을 위한 실내 환경 측정 시스템, 주차 시 생길 수 있는 사고에 대한 감시시스템을 센서와 MCU등을 이용한 임베디드 시스템을 구현 하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.832-837
• /
• 1991

After many years of proliferation, the nuclear industry is indebted for a formidable consequence, the safe management of spent fuel. Naturally, the high radioactivity involved with such process motivates the development of effective telerobotic systems. Nevertheless, the existing master-slave type of tele manipulators are limited in effectiveness by the human operator's limited sensory and manipulation capabilities. This paper presents the result of a research effort to resolve such problems by assigning the slave manipulator a certain degree of intelligence; sensing and actuation. In the presented system, a perception-action loop is achieved using ultrasonic range sensor and laser distance sensor interfaced with the PUMA 760 industrial robot system, and applied to automating impact wrenching task for unbolting the lid of nuclear spent fuel cask. The perception-action loop performs determination of the cask location, collision avoidance and centering of the impact wrench onto the bolt head. To aid the insertion task and to provide versatility a mounting module consisting of an RCC device and an automatic tool changer is designed and implemented. The performance of the developed system is tested on the model cask and the result is given.

• 자동차안전학회지
• /
• 제16권2호
• /
• pp.14-19
• /
• 2024

This paper describes autonomous emergency braking systems (AEB) for elderly drivers designed to consider their driving characteristics. With aging, perception-reaction time, and decision-making time increase accordingly. Without being aware of these performance degradations, however, changes in driving patterns due to increased alertness while driving lead to vehicle crashes. Therefore, it is necessary to develop an autonomous emergency braking system by incorporating the characteristics of the elderly driver. In order to enhance the driver acceptance of older people, perception-reaction time, alertness, and ride comfort need to be considered for conventional autonomous emergency braking systems (C-AEB). Proactive AEB(P-AEB) algorithm has been proposed to reflect human factor of elderly driver above. The performance of the proposed algorithm has been evaluated through MATLAB simulink simulation studies. It has been shown from the computer simulations that the proposed P-AEB algorithm enhances the driver acceptance of older people by improving ride comfort while ensuring safety of vehicle.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.389-389
• /
• 2000

The number of automobiles is rapidly increasing , as are the importance of the car as a way of transportation, and the variety of its uses. In these surroundings, a safety, one of the primary factors which must be considered in automotive engineering, demands a system that aids the driver's vision and perception. In this point of view, development of the more promoted system that complement the existing passive method which relies on just man's ability is the important issue of the advanced traffic system including ITS. In this paper, we provide an algorithm and implementation of a control system that warns the collisions ahead and avoids this situation, using informations about the host-car, target-car and surroundings. The warning is made by an algorithm that decides the degree of safely. With this degree of safely, the controller automatically controls a vehicle's speed to a proper level.

• 한국항해항만학회지
• /
• 제33권8호
• /
• pp.519-524
• /
• 2009

VTS의 관제 범위에서 발생한 교통관련사고 분석은 VTS의 개선방향 검토에 중요한 기초 자료를 제공할 것으로 기대되나 현재까지의 연구는 미흡한 실정이다. 분석은 최근 6년(1999-2004년)간의 해양안전심판재결서와 VTS 센터별 자료 및 Port-Mis자료를 이용하여 이루어졌다. 연구결과, 1) 교통관련사고의 통제 및 VTS의 개선 방향을 검토할 필요성을 확인하였다. 2) 교통관련사고의 경우 관제여부에 따라 사고원인과 시정상태, 충돌사고의 상대선 인지거리 및 인지지체원인에 차이가 발생함을 통계적으로 확인하였다. 3) VTS의 지원은 충분한 시간 전에 적극적이고 지속적으로 이루어져야 하며 04-08시 시간대에 강화되어야 함을 확인하였다. 4) 사고예측모형을 통해 관제선박의 교통관련사고는 일평균 교통량에 큰 영향을 받고 있으므로 VTS 운영자가 사고의 위험성이 높은 선박을 우선적으로 식별하여 관련 정보를 신속하고 적극적으로 제공할 수 있도록 지원하는 시스템을 구축하여야 한다.

• 로봇학회논문지
• /
• 제19권2호
• /
• pp.149-158
• /
• 2024

This paper presents a robust autonomous navigation and reconnaissance system for tracked robots, designed to handle complex multi-floor indoor environments with stairs. We introduce a localization algorithm that adjusts scan matching parameters to robustly estimate positions and create maps in environments with scarce features, such as narrow rooms and staircases. Our system also features a path planning algorithm that calculates distance costs from surrounding obstacles, integrated with a specialized PID controller tuned to the robot's differential kinematics for collision-free navigation in confined spaces. The perception module leverages multi-image fusion and camera-LiDAR fusion to accurately detect and map the 3D positions of objects around the robot in real time. Through practical tests in real settings, we have verified that our system performs reliably. Based on this reliability, we expect that our research team's autonomous reconnaissance system will be practically utilized in actual disaster situations and environments that are difficult for humans to access, thereby making a significant contribution.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2002년도 학술대회지
• /
• pp.188-191
• /
• 2002

This paper concerns 3-D graphical modeling and simulation techniques for design and control of automated equipment for construction and facility maintenance. A case study on the use of 3-D graphics techniques for developing a power plant maintenance robot is presented. By simulating equipment operation within the 3-D geometry models of the work environment the environment design was improved. The 3-D graphical models of the equipment and the work environment were further utilized for the control of the robot from a remote distance. By presenting the real-time updated equipment configuration and the work environment to the operator, the graphical model-based equipment control system helped the operator overcome the problems associated with spatial perception. The collision between the robot and the plant structures was also avoided based the real-time analysis of the dynamically updated graphical models.