• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.295-300
• /
• 2012

Various forward collision warning algorithms have studied in order to protect a car accident. For this, in general, algorithms using an external device such as a camera and sensor generate a forward collision warning. However, if using the external device, it can occur errors due to device characteristics when there is rain or fog. Also, the prevention of a chain-reaction collision is insufficient because the system generates a warning in case of only vehicle having a forward collision danger. If it combines the vehicle safety communications, the method becomes a solution to protect a chain-reaction collision. So, In this paper, we proposes a improved forward collision warning algorithm using the wireless communication technique, driver's information, breaking distance, and velocity. And we compare and analyze our algorithm and previous algorithms.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.137-143
• /
• 2009

It is necessary to develop driving assistant information in order to prevent a rear-end collision with a crashed car which is at the blind curve on highway. Laboratory experiments were performed using a driving simulator to keep the traffic environment constant. This research was evaluated the effect of driver behavior according to providing collision avoidance information which was consisted of advisory, caution, and warning information by the dangerous degree of traffic situation. Driver behavior was evaluated to analyze the collision avoidance with a crashed car, and glance behavior was examined to measure the eye movements to the display on which provided the collision avoidance information. After experiment, the significance was evaluated on provided collision avoidance information. As the result of this research, the number of collision accident is reduced when the phased information was provided. In addition, it is clear that auditory information is more important than visual information in the case of providing the second information.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.104-109
• /
• 2010

The fatality of pedestrian accounts for about 21.2% of all fatality at 2007 year in Korea. In car to pedestrian accident it is very important to inspect the throw distance of pedestrian after collision for exact reconstructing of the accident. The variables that influence on the throw distance of pedestrian can be classified into the factors of vehicle and pedestrian, and road condition. It was simulated by PC-CRASH, a kinetic analysis program for a traffic accident in sedan type vehicle and SPSS program was used for regression analysis. From the results, the throw distance of pedestrian increased with the increasing of vehicle velocity, and decreased with the increasing of impact offset. Also it decreased with the increasing of velocity of pedestrian at accident, and throw distance at the road condition of wet was longer than that at dry condition. Finally, the regression model of sedan type vehicle on the throw distance of pedestrian was as follows; $$dist_i=2.39-0.11offset_i+0.59speed_i-545height_i-0.25walk_i+2.78wet_i+{\epsilon}_i$$.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.4
• /
• pp.115-120
• /
• 2008

The fatalities of pedestrian accounted for about 40.0% of all fatalities in Korea (2005 year). In pedestrian involved accident, the most important data to inspect accident is throw distance of pedestrian. The throw distance of pedestrian can be influenced by many variables, such as vehicular frontal shape, vehicular impact speed, the offset of impact point, the height of pedestrian, and road condition. The trajectory of pedestrian after collision can be influenced by vehicular frontal shape classified into sedan type, box type, SUV type and van type. Many studies have been done about pedestrian accident with passenger car model and bus model for simple factors. But the study of pedestrian accident by van type vehicle was much insufficient, and even that the influence of multiple factors such as the offset of impact point was neglected. In this paper, a series of pedestrian kinetic simulation were conducted to inspect relationship between throw distance and multiple factors with using PC-CRASH s/w, a kinetic analysis program for a traffic accident for van type. By based on the simulation results, multi-variate regression was conducted, and regression equation was presented.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.775-789
• /
• 2008

The Office for Government Policy Coordination announced in 2006, september that a scheme of pre-signal would show remarkable outcome to reduce traffic accidents. Therefore, the Ministry recommended applying preferentially the pre-signal scheme to enhancement projects for high accident frequency areas. In case that the suggested pre-signal was unilaterally introduced to the enhancement projects at intersections, it might rather cause a big trial and error in terms of traffic safety. Hence, on the basis of quantitative analysis, this study was to indicate a pre-signal's effectiveness to reduce the traffic accidents, to illustrate a trend of the accident type due to the pre-signal, and to introduce intersection type that could be appropriate for the pre-signal. The methodology adopted Comparison-Group Method which was developed by Hauer. Through this methodology, overall effectiveness to reduce the accidents is considered positive but individual effectiveness by intersection and by accident case was different. All cases of the accidents at small scale intersection demonstrated positive results to reduce its accidents, while in case of frontal collision and side-right angle collision out of the accident types, the installation of pre-signal rather caused a negative result increasing the accident in terms of the traffic safety. I hope that this study would be a useful reference for future development of the estimation of accident effectiveness. Thus, when the pre-signal is being installed in the big intersection, it is recommended operating the installation concerning carefully improvements about muliple aspects as traffic operation, traffic facility, human factor etc.

• Proceedings of the KSR Conference
• /
• 2006.05b
• /
• pp.1096-1101
• /
• 2006

• Journal of Korean Society of Transportation
• /
• v.18 no.4
• /
• pp.107-115
• /
• 2000

We suggest a method which solves the planar, two vehicle collision reconstruction problem. The method based on the Principle of impulse and momentum determines the pre-impact velocity components from Post-impact velocity components, vehicle Physical data and collision geometry. A novel feature is that although the impact coefficients such as the restitution coefficient and the impulse ratio are unknown, the method can estimate automatically the coefficients and calculate the pre-impact velocity components. This reverse calculation is important for vehicle accident reconstruction, since the pre-impact velocities are unknown and Post-impact Phase is the starting Point in a usual collision analysis. However. an inverse solution is not always Possible with the analytical rigid-body impact model. Mathematically, one does not exist under the common velocity condition. On the other hand, our method has a capability of reverse calculation under the condition if the absorbed energy during the collision process can be estimated using the crush profile. To validate the developed collision reconstruction a1gorithm, we use car-to-car collision test results. The analysis and experimental results agree well in the impact coefficients and the Pre-impact velocity components.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.863-869
• /
• 2018

Due to recent changes in the maritime traffic environment, naval warship accidents are constantly occurring. Especially in 2017, serious loss of life was caused by a US navy destroyer accident. The purpose of this study is to analyze the characteristics of naval warship accident cases and construct an accident scenario by using naval training materials, adjudication of naval warship accidents and US navy destroyer accident reports. Based on the surveyed data, the status of accidents was identified and cases were analyzed. We reproduced 17 accident cases in accordance with accident reproduction procedure and constructed naval warship accident scenarios. As a result of analyzing the CPA, TCPA and PARK model for risk, reproducing 17 naval ship accident cases, collision risk increased on average 5-6 minutes before an accident. The result of this study represents basic data for naval and simulation education materials, contributing to the prevention of marine accidents.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.92-97
• /
• 2012

In the present the usage of bicycle has increased steeply due to well-being and convenient way of movement. In car to bicycle accident, the throw distance of bicycle is very important factor for estimating collision situation. In this study, simulations and collision tests in actual car to bicycle were executed for obtaining throw distance of bicycle. The simulations were executed by PC-CRASHTM s/w with vehicle of sedan type. Sand bags were used for the behavior of bicyclist instead of dummy and factors considered were vehicle velocity, the crashed angles and part of bicycle to vehicle, and bicycle was adult type. From the results, the throw distances of tire collision of 00 was longer than that of 450 tire crash, and the throw distances of 900 frame crash were longer than those of 450 frame crash. With based on actual crash tests and simulations, restitution coefficient of between vehicle and bicycle was estimated as 0.1. Finally the increaser vehicle velocity the longer the throw distances of bicycle and the simulation results were relatively good agreement to the results of experiment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2019

In December 2017, many collision accidents of small vessels, such as those between oil refineries and fishing boats, occurred near Yeonghung-do in Incheon. In order to prevent marine casualties from small vessels, the government is striving to improve the safety capabilities of ship operators by strengthening education and improving the working environment. They are providing education and refining training regulations for fishermen operating vessels under 5 tons. However, the situation includes certain vulnerabilities. In this study, we propose a collision prevention algorithm for small vessels using the Wireless Access in Vehicular Environments (WAVE) communication system, which is a new communication technique to prevent collisions with small ships. The collision avoidance algorithm used is based on DCPA/TCPA. Research analyses, simulation experiments and questionnaires have been conducted to define the criteria of DCPA/TCPA. As a result, the standard for DCPA was $8(L_a+L_b)$ and for TCPA was 2.5 min. Three different accident cases were selected, and this algorithm was applied to confirm alarm responses at certain times. This algorithm can provide information to the operators of small ships in advance to help them recognize potential collision situations.