• Journal of Platform Technology
• /
• v.11 no.5
• /
• pp.49-58
• /
• 2023

Factory energy management system is rapidly growing and evolving due to factors such as the 3rd Basic Energy Plan and global energy cost increases, as well as environmental issues. However, implementing an essential data collection system for energy management in factory settings, which have limited space and unique characteristics, presents spatial, environmental, and energy-related challenges. This paper endeavors to mitigate these challenges by devising a data collection system implemented through an edge-based lightweight platform. A comparison and evaluation of database operation on edge devices are conducted. To conduct the evaluation, a benchmarking tool called CDI Benchmark is developed, utilizing the characteristics of existing factories involved in practical applications. The evaluation results revealed that RDBMS systems like MySQL encountered errors in the database due to high data insertion loads, making them inoperable. On the other hand, InfluxDB, thanks to its highly efficient compression algorithm, demonstrated compression rates about 6 times higher than MyRocks according to the evaluation. However, it was observed that MyRocks outperformed InfluxDB by a significant margin, recording a maximum processing time approximately 80 times faster compared to InfluxDB.

• Journal of Environmental Health Sciences
• /
• v.33 no.2 s.95
• /
• pp.145-149
• /
• 2007

The range of reduction rates of airborne bacteria concentration at 6 hrs, 12 hrs, 24 hrs and 48 hrs, which means a storage time until input of agar media into incubator after air sampling with an impactor. were 15-20%, 25-40%, 35-50% and 55-70%, respectively, compared to initial concentration. Types of agar media and storage thermal condition did not significantly affect a collection efficiency of impactor in terms of evaluating airborne bacteria level (p>0.05). To better improve the impactor's collection efficiency of airborne bacteria, based on the result of this study, it is recommended that the vicinity of $25^{\circ}C$ should be sustained until input of agar media into incubator after air sampling.

• Journal of Korea Multimedia Society
• /
• v.15 no.1
• /
• pp.101-107
• /
• 2012

Real time information on disaster situation is very important in disaster prevention effort. Generally, disaster related organizations use mobile devices to collect various disaster informations of disaster site. However, current disaster collection systems do not provide effective functionality to connect with another disaster information system. Therefore, disaster-related organizations have to make smartphone application for collection and administration of disaster information and then connect it with another information system. If this system is commercialized, vulnerability of previous system can be complemented. Thus, this paper focused on designing a prototype system for information collection and management in disaster site using smartphone applicatiom.

• International Journal of Knowledge Content Development & Technology
• /
• v.10 no.2
• /
• pp.39-49
• /
• 2020

Accurate and reliable Information improves decision making, reduces costs, and saves time. The ophthalmic Libraries supply quality ophthalmic information to the ophthalmologists to serve the patients in a better way and stimulate the growth of ophthalmic field. This paper aims to study the usage of library collection, services and assistance among the Ophthalmologists - Eye Doctors in India. A survey method is used to obtain the ophthalmologists' usage of library collection, services and assistance. Through convenient sampling method, a structured questionnaire is circulated to the ophthalmologists in India and 633 ophthalmologists are responded. Among the 633 ophthalmologist, 82.15% of the ophthalmologists use the library collection - book. 73.46% of the ophthalmologists use the online data / journals. 89.73% of the ophthalmologists seek assistance to locate books/articles/documents. There exists a significant difference between the ophthalmologists use of Library Service and gender (p value 0.001**). There exists a significant difference between the ophthalmologists use of Library Assistance / help and designation category (p value 0.000**). There exists a significant difference between the ophthalmologists use of Library Assistance / help and working experience (p value 0.017**). There exists a significant difference between Library Services (p value 0.009**), Library Assistance / help (p value 0.000**) and institution type. The study results will help the ophthalmic libraries to serve the user better.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.3
• /
• pp.297-306
• /
• 2003

Works were focused on back pressure characteristics of ceramic fiber filter on DPF (Diesel Particulate Filter) system and experiments were performed to select appropriate filter which can filter particulates. Filters were installed on metal -support tube which has openings for exhaust gas flow. Ceramic fiber filters with high specific surface area and adequate high temperature strength are commercially available for filtration of diesel particulates and in -situ hot regeneration. Thus, ceramic blanket and ceramic board which are used as insulating media were applied to filter and filtration apparatus was installed on exhaust gas line connected to 2.0 L diesel engine. Alternating filter structure to adapt DPF system, collection efficiency test of diesel particulates was measured. In case of ceramic blanket, pressure drop was low, caused by the destruction of soft structures. Also, particulate collection efficiency was decreased depending on loading time. In case of ceramic board, structure design was altered to reduce back pressure on DPF system. Structure design was altered to induce Z-flow by making 10 mm and 5 mm holes on the surface of media. Alteration of 5 mm hole showed that media have low back pressure but particulate collection efficiency was 77%, while 10 mm hole showed that of 90%.

• Journal of ILASS-Korea
• /
• v.16 no.2
• /
• pp.69-75
• /
• 2011

This article presents computational fluid dynamics (CFD) simulations of sub-micron particle movements and flow characteristics in laboratory-scale electrostatic precipitator (ESP) without corona discharge, and for simulation, it uses the commercial CFD program (CFD-ACE) including electrostatic theory and Lagrangian-based equation for sub-micron particle movement. For validation of CFD results, a simple cylindrical type of ESP is simulated and numerical prediction shows fairly good agreement with the analytical solution. In particular, the present study investigates the effect of particle diameter, inlet flow rate, and applied electric potential on particle collection efficiency and compares the numerical prediction with the experimental data, showing good agreement. It is found that the particle collection efficiency decreases with increasing inlet flow rate because the particle detention time becomes shorter, whereas it decreases with the increase in sub-micron particle diameter and with the decrease of applied electric voltage resulting from smaller terminal electrostatic velocity.

• Particle and aerosol research
• /
• v.11 no.2
• /
• pp.29-36
• /
• 2015

The purpose of this research is to find out the collection property of nanoparticle in diffusion filter to know particle size dispersion of nanomaterial using inertial force and principle of Brownian diffusion motion. We used inertial filters which are two different type and diffusion filters made by various kinds of Wiremesh and the different pieces of filter to compare with particle size distribution using NaCl particles. Finally, We made a conclusion as follows : (1) the bigger available charging volume is and the larger specific surface area of inertial filter is, the better collection efficiency is. (2) The higher wire-mesh number of filter is, the more collection efficiency of small particle is increasing because the wire of the higher Wiremesh number filter is thinner and denser. (3) The more pieces of wire-mesh filter, the more collection efficiency is increasing because it makes the residence time longer.

• Journal of Korean Society of Rural Planning
• /
• v.15 no.4
• /
• pp.173-182
• /
• 2009

This study is a plan for the Jeju Sanghyo Botanical Garden construction, and it is prepared to maintain the identity of the local landscape by composing the garden using the local landscape resources. The goals of becoming one of world's best, garden centered botanical garden and at the same time one that represents culture of Jeju. Unusual species are included in the collection and with the general collection, special collection and exhibition by different kinds are planned to be offered to the public. The garden will demonstrate the world's various types of gardens in a compressed way. It is our endeavor to become center of culture beyond plant education and exhibition, drawing a large number of people to our garden. Moreover, conservation of Jeju's unique botanic resources will be carried out and the garden will show the garden culture. Due to the size of the site, different themes will be exhibited in one zone in a parallel. Unique combination of each local landscape resource will create own theme. The display will be divided into three different stages: the 1st stage is an educational exhibition, assisting more understanding of distinguishing different locations, the second is exhibition by various species and the final stage will show an ideal way to develop a garden with harmony of various plant species.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.493-501
• /
• 2016

In-network storage is an effective technique for avoiding network congestion and reducing power consumption in continuous data collection in wireless sensor networks. In recent years, network coding based storage design has been proposed as a means to achieving ubiquitous access that permits any query to be satisfied by a few random (nearby) storage nodes. To maintain data consistency in continuous data collection applications, the readings of a sensor over time must be sent to the same set of storage nodes. In this paper, we present an efficient approach to updating data at storage nodes to maintain data consistency at the storage nodes without decoding out the old data and re-encoding with new data. We studied a transmission strategy that identifies a set of storage nodes for each source sensor that minimizes the transmission cost and achieves ubiquitous access by transmitting sparsely using the sparse matrix theory. We demonstrate that the problem of minimizing the cost of transmission with coding is NP-hard. We present an approximation algorithm based on regarding every storage node with memory size B as B tiny nodes that can store only one packet. We analyzed the approximation ratio of the proposed approximation solution, and compared the performance of the proposed coding approach with other coding schemes presented in the literature. The simulation results confirm that significant performance improvement can be achieved with the proposed transmission strategy.

• The Korean Journal of Mycology
• /
• v.42 no.4
• /
• pp.276-281
• /
• 2014

Nine strains of fungi which showed different colonies were isolated from Cheongdo-Banshi (flat persimmon) stored in a refrigerator. Based on morphological and molecular characteristics, they were identified as Botrytis cinerea (n=4), Penicillium expansum (n=2), and Rhizopus delemar (n=1). Of these, B. cinerea and P. expansum occurred frequently but R. delemar occurred rarely. This report of P. expansum and R. delemar on persimmon is the first time in Korea.