Heat losses from receivers for a dish-type solar energy collecting system are numerically investigated. The analytical method for predicting conductive heat loss from a cavity receiver is used. The Stine and McDonald Model is used to estimate convective heat loss. Two kinds of techniques for the radiation analysis are used. The Net Radiation Method that is based on the radiation heat balance on the surface is used to calculate the radiation heat transfer rate from the inside surface of the cavity receiver to the environment. The Monte-Carlo Method that is the statistical approach is adopted to predict the radiation heat transfer rate from the reflector to the receiver. Based on the heat loss analysis, the performance of two different receivers for multifaceted parabolic solar collectors with several flat facets can be estimated, and the optimal facet size is obtained.
PURPOSES : This study attempts to design and establish the road surface condition detection system by using the image processing that is expected to help implement the low-cost and high-efficiency road information detection system by examining technology trends in the field of road surface condition information detection and related case studies. METHODS : Adapted visual information collecting method(setting a stereo camera outside of the vehicle) and visual information algorithm(transform a Wavelet Transform, using the K-means clustering) Experiments and Analysis on Real-road, just as four states(Dry, Wet, Snow, Ice). RESULTS : Test results showed that detection rate of 95% or more was found under the wet road surface, and the detection rate of 85% or more in snowy road surface. However, the low detection rate of 30% was found under the icy road surface. CONCLUSIONS : As a method to improve the detection rate of the mobile road surface condition information detection system developed in this study, more accurate phase analysis in the image processing process was needed. If periodic synchronization through automatic settings of the camera according to weather or ambient light was not made at the time of image acquisition, a significant change in the values of polarization coefficients occurs.
Choi, Woo Nyun;Lee, UkJae;Bae, Jun Woo;Kim, Hee Reyoung
Nuclear Engineering and Technology
/
제51권4호
/
pp.1169-1175
/
2019
The minimum detectable activity (MDA) value was derived according to the flow rate of the sample and degree of amplification of the device by sending the sample directly from the collection site to the detection part through a pump. This method can lead to reduction in time and cost compared to the existing measurement method that uses a pre-treatment process. In this study, experiments were conducted on $^3H$ and $^{90}Sr$, which are the major pure beta-emitting radionuclides, by setting the sample flow rate and the amplification gain as factors. The MDA values were derived according to the flow rates, considering that the flow rate can affect the MDA values. There were no change in the MDA under different flow rates of 0, 600, 800, and 1000 mL/min. Therefore, it was confirmed that the flow rate may not be considered when collecting samples for monitoring in actual field. As the degree of amplification of the amplifier increased, the time required to reach the target MDA decreased. When the amplification was quadrupled, the detection efficiency increased by approximately 23.4 times, and the time to reach the MDA decreased to approximately 1/550 times. This method offers the advantage of real-time on-site monitoring.
기존의 전량집수법은 유실된 토양과 물을 전부 채취하기 위하여 시험대상지 하부에 낙차를 두어 일정규모의 집수조를 설치하여야 하고, 유실 토양과 유출 수를 측정한 후에는 집수조 내부의 토양과 물을 전부 제거해야 하므로 집수조의 설치 및 관리에 많은 노력과 비용이 소요된다. 이러한 집수구 설치 및 관리상의 문제점을 개선하기 위하여 토양보전시험연구를 위하여 장소선정이 용이하고, 시험포장에서 배출되는 토양유실 및 유출수의 측정과 시료채취 작업이 간편한 회전분할집수기를 제작하여 기존의 표준방법과 비교하였다. 농경지에서 유실되는 토양과 물을 일정 비율로 채취하기 위하여 집수기의 원형판을 8부분으로 분할하여 각 날개에 일정량의 물이나 토양이 채워지면 무게 중심이 아래로 이동하는 방법으로 소량의 물이나 토양에 의해 자체 회전하면서 시료 중 일부만 채취하도록 하였고, 집수기 자체의 각도를 기울여 각각의 날개에 채워진 유출수와 유실토양은 원형판이 가장 낮은곳에서 회전할 때 비워지도록 하였다. 회전분할집수기의 정밀도를 비교하기 위하여 실내실험으로 유수량을 $1{\sim}10L\;min^{-1}$로 조절하여 유출수량과 회전분할집수기의 채취량을 비교한 결과 고도의 직선적인 정의상관 ($r=0.997^{***}$)을 보였으며, 야외 시험포장에서 회전분할집수기 시제품을 설치하여 측정한 결과 집수비율은 토양 유실량 및 물 유출량이 많을수록 정밀도가 높았다.
Experiments were carried out to study the operation characteristics of a regenerator with a thermo-syphon pump and a surface-flame burner for a lithium bromide (LiBr)-water absorption heat pump. A cylindrical-shape metal-fiber burner and commercial grade propane were used. The emission of carbon monoxide and nitric oxide was measured by a combustion gas analyzer. Ther regeneration rate of water vapor as a refrigerant was measured. It could be as a reference value showing the performance of the regenerator. The circulation rate of the LiBr-water solution was also measured from both the tanks for the weak-and the strong-solution. Using a refractometer, the LiBr concetration in the solution was calculated from the measured refractory index of the solution. Temperature of the solution and the condensed water was recorded at several points in the experimental apparatus with thermocouples, using a personal computer. This data collecting system for measuring temperature was calibrated with a set of standard thermometers. The generating rate of water vapor as refrigerant increased linearly with heat supplied. It was about 4.0g/s with the heat supplied at a rate of 16,500kcal/h. The circulation rate of LiBr solution also increases with the heat supplied. The difference in LiBr concentrations between the weak and the strong solution was in the range of 1 to 5% when the concentration of the strong solution was about 60%. It was dependent upon both the heat supplied and the circulation rate of the solution. The initial concentration and the level of the LiBr solution in the regenerator were measured and recorded before experiments. The effect of them on the generating rate of water vapor and the circulation rate of the solution was also studied. The generating rate of water vapor was not strongly dependent upon both the level of the LiBr solution and the initial LiBr concentration. However, the concentration difference of the solution increases with the initial level of the LiBr solution.
International Journal of Advanced Culture Technology
/
제9권3호
/
pp.174-180
/
2021
The necessity of this study is as follows. A decrease in the number of newborns, an increase in the youth unemployment rate, and a decrease in the employment rate are having a fatal impact on universities. To help increase the employment rate of universities, we intend to utilize Big Data of university public information. Big data refers to the process of collecting and analyzing data, and includes all business processes of finding data, reprocessing information in an easy-to-understand manner, and selling information to people and institutions. Big data technology can be divided into technologies for storing, refining, analyzing, and predicting big data. The purpose of this study is to find the vision and special department of a university with a high employment rate by using big data technology. As a result of the study, big data was collected from 227 universities on www.academyinfo.go.kr site, We selected 130 meaningful universities and selected 25 universities with high employment rates and 25 universities with low employment rates. In conclusion, the university with a high employment rate can first be said to have a student-centered vision and university specialization. The reason is that, for universities with a high employment rate, the vision was to foster talents and specialize, whereas for universities with a low employment rate, regional bases took precedence. Second, universities with a high employment rate have a high interest in specialized departments. This is because, as a result of checking the presence or absence of a characterization plan, universities with a high employment rate were twice as high (21/7). Third, universities with high employment rates promote social needs and characterization. This is because the characteristic departments of universities with high employment rates are in the order of future technology and nursing and health, while universities with low employment rates promoted school-centered specialization in future technology and culture, tourism and art. In summary, universities with high employment rates showed high interest in student-centered vision and development of special departments for social needs.
This research was conducted to investigate the interrelationship among methods of injection of PMSG-hCG to the number of ovulated eggs, percentage of matured oocytes and in vitro fertilization using out-bred ICR mice. The results obtained are as follows, 1) The optimurn dose was 5 IU for both PMSG and hCG, while the number of ovulated eggs was 42$\pm$8, percentage of M II was 73% and in vitro fertilization rate was 81 %. 2) The optimum injection interval of PMSG-hCG was 48 hours, while the number of ovulated eggs was 48 $\pm$ 8, percentage of M II was 80% and in vitro fertilization rate was 81%. 3) The optimum time for collecting eggs was between 16 and 18 hours after hCG injection, while the numbers of ovulated eggs were 44$\pm$8, 42$\pm$7 and 43$\pm$7 in 14,16 and 18 hours after hCG injection respectively, and percentages of M II were 79 and 81 %, and in vitro fertilization rates were 81 and 80% in 16 and 18 hours after hCG injection, respectively. 4) The repeat of superovulation decreased with the number of ovulated eggs, percentage of M II and in vitro fertilization rate, than in control. But it was recovered by increasing the repeat interval.
KIM, Song-Eun;MUN, Ji-Hui;KIM, Kyoung-Sook;KANG, Min-Soo
한국인공지능학회지
/
제8권1호
/
pp.1-6
/
2020
The Recently there has been a growing interest in health care due to the COVID-19 situation. In this paper, we intend to develop a healthcare monitoring system to provide users with smart healthcare systems in line with the healthcare 3.0 era. The system consists of a wireless network between various sensors, Android smartphones, and OLEDs using Bluetooth, and through this, a health care monitoring system capable of collecting user's biometric information and managing health by receiving data values of sensors connected to Arduino. In conclusion, the user's BPM value was calculated using the heart rate sensor, and the exercise intensity can be adjusted through this. In addition, a step derivation algorithm is implemented using an acceleration sensor, and calorie consumption can be measured using the step and weight values. As such, the heart rate, step count, calorie consumption data can be transmitted to a smartphone application through a Bluetooth module and output, and can be output to an OLED for users who are not easy to access the smartphone. This healthcare monitoring system can be applied to various groups and technologies.
Purpose: This study aimed to examine the effects of extended family visiting hours in the intensive care unit (ICU). Methods: The subjects were 168 ICU patients and their family members. Two 30-minute visits a day were allowed to the control group according to current policy, while four 30-minute visits a day were allowed to the experimental group. Patients' state anxiety was measured at the first day of ICU admission, and on the third day of ICU admission patients' anxiety and family satisfaction were measured. For the infection rate, comparison was made between the experimental and control data-collecting periods. Results: The patients' state anxiety significantly decreased in the experimental group. Family satisfaction of experimental group was significantly higher than that of control group. There was no significant difference in the infection rate. Nurses positively evaluated extension of visiting hours because it could stabilize patients, reduce the number of arrangements for additional visits, and help establish trust relationship with families. Conclusion: Extended family visiting hours in the ICU reduced patients' anxiety and improved family satisfaction but had no effect on the infection rate. Extended family visiting hours in the ICU is expected to improve the quality of critical care.
This study was conducted to investigate the effect of unilateral ovariectomy on the embryo survival and changes of plasma progesterone and estradiol concentration. Mature Angora rabbits were divided into 2 groups (Superovulation and unilateral ovariectomy after superovulation). Unilateral ovariectomied rabilts were subdivided into two groups according to the time of ovariectomy (24 hours and 96 hours after mating). The results obtained were summarized as follows; 1. After unilateral ovariectomy, survival rate and collecting rate of embryos recovered from contralateral and ipsilateral oviduct and uterus were not different, and were lower than intact rabbits. 2. Plasma progesterone concentration at 93, 99, 102 and 114 hours after HCG injection in superovulated rabbits were 12.9 $\pm$ 0.5, 34.8 $\pm$ 5.1, 12.2 $\pm$ 2.7 and 43.4 $\pm$ 5.8ng/ml, respectively. Mean progesterone concentrations were significantly higher at 99 and 114 hours than at 93 and 102 hours (p <0.05). But plasma estradiol concentration was not different. 3. Plasma progesterone concentration in unilateral ovariectomized rabbits was somewhat decreased after unilateral ovariectomy. Plasma estradiol concentration was not different.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.