• 한국환경과학회지
• /
• 제28권5호
• /
• pp.521-526
• /
• 2019

In this study, a solar light collector that collects and transmits solar light required for crop production in a closed plant production system was developed. The solar light collector consisted of a Fresnel lens for collecting solar light, and a tracking actuator for tracking solar light from sunrise to sunset to increase the light collection efficiency. The optical fiber that transmitted solar light was made of Glass Optical Fiber (GOF), and it had an excellent optical transmission rate. After collecting the solar light, the amount of light was measured at 5, 10, 15, 20, 25, and 30 cm distances from the GOF through the darkroom by using a light sensor logger connected to a quantum and pyranometer sensor. Compared with solar light, the light intensity of pyranometer sensor measured at 5 cm was 114% higher than solar light, and 61% at 10 cm. In addition, it was observed that it is possible to transmit the necessary amount of light for growing crops up to about 15 cm (as over 22%) through GOF. Therefore, adding diffusers to the solar light collector should be expected to replace artificial light in plant factories or plug seedlings nurseries for leafy vegetables. More studies on the solar light collection devices and the light transmission devices that have high light collection efficiency should be conducted.

• 디지털산업정보학회논문지
• /
• 제5권3호
• /
• pp.1-8
• /
• 2009

There are several ways to solve parking problem in the downtown. One of them is to manage parking efficiently, that is, to raise use-efficiency of parking place and to help in the block efficiently, it can prevent disproportion that some parking space is over capacity and the other parking one is under. It causes not only the disproportion of economic efficiency but also the congestion of local road. The precondition to manage parking efficiently is to analyse the parking characteristics. In this paper we build up total D/B by collecting every information about parking space. We developed the Parking Management System by using RFID and Sensor. The efficient Parking Management System is for convenience of drivers and efficient usage of parking space. And this system is also the basic study to be developed as the total Parking Management System by upgrading every information.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.13.1-13.1
• /
• 2011

Photoelectrochemical solar cells such as dye-sensitized cells (DSSCs), which exhibit high performance and are cost-effective, provide an alternative to conventional p-n junction photovoltaic devices. However, the efficiency of such cells plateaus at 11~12%, in contrast to their theoretical value of 33%. The majority of research has focused on improving energy conversion efficiency of DSSC by controlling nanostructure and exploiting new materials in photoelectrode consisting of semiconducting oxide nanoparticles and a transparent conducting oxide electrode (TCO) [1-5]. In this presentation, we introduce inverse opal-based scattering layers containing highly crystalline anatase nanoparticles and their feasibility for use as bi-functional light scattering layer is discussed in terms of optical reflectance and charge generation properties as a function of optical wavelength. A new ITO nanowire-based photoelecrode is also introduced and its unique charge collection property is presented, demonstrating potential use for highly efficient charge collection in DSSC.

• 대한음성언어의학회:학술대회논문집
• /
• 대한음성언어의학회 2003년도 제19회 학술대회
• /
• pp.147-147
• /
• 2003

Recent aerodynamic and acoustic studies of VPI(velopharyngeal insufficiency) are non-invasive and safety, therefore, many researchers have used it to diagnose the hyper/hyponasality and articulation disorders of cleft palate patients. The purpose of this study was to estimate mainly the oropharyngeal air pressure and over all air flow in cleft lip and palate patients. The pressure-collecting catheter was positioned in the oropharyngel cavity around tongue base. Twelve adult control group and three cleft lip & palate patients were participated to this experimentation. Aerophone II was used to measure peak air flow, mean air flow, phonatory airflow, phonatory efficiency and resistance. The results were as follows: 1) Airflow of cleft lip ＆ palate patients group were higher than those of control group. Fricative sounds /s/ and /s'/ showed the statistic significance of mean airflow and volume data. 2) Intraoral air pressure of cleft lip ＆ palate patients was lower than those of control group.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.183-190
• /
• 2006

For continuously regenerative PM collecting system which adopted thermally stable SiC DPF and electrical heater which was placed upstream of the filter and driven by well constructed control logic, PM oxidation characteristics were investigated varying air flow rate, amounts of PM accumulated on the DPF and filter inlet temperature in order to get optimized PM regeneration performance. This study showed that the operating condition of air flow rate 70 lpm, high PM loading around 30g and filter inlet temperature $700^{\circ}C$ with heat insulation was effective in achieving high regeneration efficiency. Also, in this condition, we could decrease the electric energy consumption by reducing the regeneration time.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.205-206
• /
• 2023

This paper presents a new method for indoor localization track workers in construction sites. While GPS and NTRIP are effective for outdoor positioning, they are less accurate when used indoors. To address this issue, the proposed method utilizes Aruco markers to measure the distance between workers and the markers. By collecting data values, the location of each worker can be determined in real-time with high accuracy. This approach has the potential to enhance work efficiency and safety at construction sites, as it provides more precise indoor positioning compared to conventional methods, leading to improved work efficiency.

• 정보관리학회지
• /
• 제29권2호
• /
• pp.7-25
• /
• 2012

전자저널의 활용이 급속히 증가하면서 도서관에서는 자관에서 구입되는 전자저널이 얼마나, 어떻게 활용되고 있는지에 대한 관심이 증가하였다. 또한 전자정보 컨소시엄 주관기관에서도 컨소시엄 내에서 유통되는 학술자원의 이용통계에 대한 분석을 통해 국가 차원의 전자학술저널의 유통 현황 파악 및 수요자 중심의 정보수집 정책 개발이 필수적이다. 그러나 기존의 수작업에 의존한 이용통계 수집과 출판사에서 제공하는 저널 이용통계 보고서만으로는 이용에 대한 포괄적이고 심층적인 분석이 불가능하다. 이에 본 연구에서는 대용량 이용통계 수집 및 분석의 기반 마련을 위해 스크린 스크래핑과 SUSHI 프로토콜을 적용한 전자저널 이용통계 자동수집 시스템을 구현하였다. 또 저널 서지정보 및 컨소시엄 계약 데이터베이스를 연동하여 심층적인 이용통계 분석정보를 생성할 수 있는 방안을 제안하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1553-1560
• /
• 2008

The modern logistics has tried not only to convert the conventional packing system into unit load system using pallet but also to enhance the fitness between packing facilities and transport modes. This is based on the goal to reduce total logistics cost using logistics efficiency. Because the packing unit can affect on both loading rate and loading facilities, the basic form of packing unit is very important to the unit load system. In Korea, the standardization of logistics has been centered on pallet, and the basic condition will be continued except of the variety of standardized pallet form. Because of this, to enhance the standardization of pallet, it is necessary to develop new standard size and form of pallet. The object of this study is to develop a new method of collecting the effectiveness of standardized packing module. The new method is based on measure of effectiveness (MOE) which can be developed by expert survey. This study has originality from the fact that the collecting method for effectiveness of pallet standardization has not been developed up to now.

• 디지털융복합연구
• /
• 제20권2호
• /
• pp.339-344
• /
• 2022

본 연구에서는 공장 및 대형 시설에서 사용되고 있는 전기집진장치에 대하여 미세분진이 효율적으로 얼마나 제거 될 수 있는지에 대한 내용이다. 미세분진 제거 효율을 평가한 결과는 다음과 같다. 10,000 V 에서는 Efficiency method I은 68.1 % 를 보였고, Efficiency method I는 58.6 %로 Efficiency method I의 효율 보다 낮은 효율을 보였다. 5,000 V 에서는 Efficiency method I은 57.6 %를 보였고, Efficiency method II는 51.6 %로 Efficiency method I보다 낮은 효율을 보였다. 2,500 V 에서는 Efficiency method I은 50.3 %를 보였고, Efficiency method II는 24.4 %로 Efficiency method I보다 낮은 효율을 보였다. Efficiency method I의 경우 전 분진농도와 필터 통과 후 분진농도을 활용하여 계산한 효율이다. Efficiency method II는 필터 후의 공기와 오염된 공기가 혼합되는 환경에서 조금 더 정확한 효율을 측정하기 위해 Efficiency method II를 계산하였다. Efficiency method II는 Efficiency method I보다 낮은 효율을 나타내었다. 전기집진장치 실험 결과 10,000 V에서 집진 성능이 가장 높게 나타났으며, 그 다음 5,000 V, 2,500 V의 순을 보였다.

• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.251-259
• /
• 2000

The ionic wind formed in a nonuniform electric field has been recognized to have a significant effect on particle collection in an electrostatic precipitator(ESP). Under normal operating conditions the effect of ionic wind is not pronounced. However, as the flow velocity becomes smaller, the ionic wind becomes pronounced and induces secondary flow, which has a significant influence on the flow field and the particle collecting efficiency. In this paper, experiments for investigating the effect of secondary flow on collection efficiencies were carried out by changing the flow velocities in 0.2-0.7m/s and the applied voltages in 9-11kV/cm. The particle size distributions and concentrations are measured by DMA and CNC. To analyze the experimental results, numerical analysis of electric filed in ESP was carried out. It shows that particle collection is influenced by two independent dimensionless numbers, $Re_{ehd}\;and\;Re_{flow}$ not by $N_{ehd}$ alone. When $Re_{flow}$, decreases for constant $Re_{ehd}$, the secondary flow prohibits the particle collection. But when $Re_{ehd}$ increases for constant $Re_{flow}$, it enhances the particle collection by driving the particles into the collection region.