• Title/Summary/Keyword: collapse rate

Search Result 221, Processing Time 0.023 seconds

Characteristics of Tensile Deformation and Shape Recovery with Transformation Temperature Change in a Ni-Ti Alloy Wire (Ni-Ti계 합금 선재의 변태온도 변화에 따른 인장변형 및 회복 특성)

  • Choi, Y.G.;Kim, M.S.;Cho, W.S.;Jang, W.Y.
    • Journal of the Korean Society for Heat Treatment
    • /
    • v.21 no.6
    • /
    • pp.307-313
    • /
    • 2008
  • The tensile deformation and shape recovery behaviors were studied in Ni-Ti shape memory wires showing different transformation characteristics by annealing at $200{\sim}600^{\circ}C$. Both R phase ${\rightarrow}$ B19' martensitic transformation at lower temperature and B2 ${\rightarrow}$ R phase transformation at higher temperature occurred in the shape memory wires annealed at $200{\sim}500^{\circ}C$. Transformation temperature and heat flow of B19' martensite increase but those of R phase main almost constant even with increasing annealing temperature. In the case of wires annealed and then cooled to $20^{\circ}C$, plateau on stress-strain curves in tensile testing can be observed due to the collapse of R phase variants and the formation of deformation-induced B19' martensite. In the case of wires annealed and then cooled to $-196^{\circ}C$, however, plateau on stress-strain curves does not appear and stress increases steadily with increasing tensile deformation. Comparing shape recovery rate with cooling temperature after annealing, shape recovery rate of the wire cooled to $20^{\circ}C$ is higher than that of the wire cooled to $-196^{\circ}C$ after annealing, and maximum shape recovery rate of 95% appears in the wire annealed at $400^{\circ}C$ and then cooled to $20^{\circ}C$. $R_s$ and $R_f$ temperatures measured during shape recovery tests are higher than $A_s$ and $A_f$ temperatures measured by DSC tests even at the same annealing temperature.

Measurement and Analysis of the Material Behavior of Corrugated Paperboard for Finite Element Analysis (유한요소해석을 위한 골판지 소재의 물성측정 및 분석)

  • Gyu-Yeol Kang;Duk-Geun Bae;Sun-Jong, Noh;Sim-Won Chin;Woo-Jong Kang
    • Composites Research
    • /
    • v.37 no.3
    • /
    • pp.143-149
    • /
    • 2024
  • This paper measures the mechanical properties of corrugated cardboard, an eco-friendly packaging material, and applies these measurements to the MAT_PAPER model in LS-DYNA for finite element analysis. Although MAT_PAPER is primarily designed for modeling the behavior of paper, this research demonstrates its applicability to corrugated cardboard as well. Tensile, compression, and shear behaviors of a corrugated cardboard were measured and analyzed, and based on these results, six yield surfaces were derived and integrated into the MAT_PAPER model. By comparing the finite element analysis of the material tests and the low velocity collapse analysis of the corrugated cardboard square boxes with each experimental results, it was shown that the behavior of corrugated cardboard could be equivalently considered well by the MAT_PAPER model. However, since the model is not rate-dependent, the high strain rate properties of liner materials were measured and used for strain rate correction. Consequently, this matches well with the results of the high-speed compression tests of the corrugated cardboard square boxes.

Novel Fabrication and Testing of a Bubble-Powered Micropump (새로운 기포동력 마이크로펌프 제작 및 실험)

  • Jung, Jung-Yeul;Kwak, Ho-Young
    • Proceedings of the KSME Conference
    • /
    • 2004.11a
    • /
    • pp.1196-1200
    • /
    • 2004
  • Micropump is very useful component in micro/nano fluidics and bioMEMS applications. In this study, a bubble-powered micropump was fabricated and tested. The micropump consists of two-parallel micro line heaters, a pair of nozzle-diffuser flow controller and a 1 mm in diameter, 400 ${\mu}m$ in depth pumping chamber. The two-parallel micro line heaters with 20 ${\mu}m-width$ and 200 ${\mu}m-length$ were fabricated to be embedded in the silicon dioxide layer of a wafer which serves as a base plate for the micropump. The pumping chamber, the pair of nozzle-diffuser unit and microchannels including the liquid inlet and outlet port were fabricated by etching through another silicon wafer. A glass wafer (thickness of $525{\pm}15$ ${\mu}m$) having two holes of inlet and outlet ports of liquid serve as upper plate of the pump. Finally the silicon wafer of the base plate, the silicon wafer of pumping chamber and the glass wafer were aligned and bonded (Si-Si bonding and anodic bonding). A sequential photograph of bubble nucleation, growth and collapse was visualized by CCD camera. Clearly liquid flow through the nozzle during the period of bubble growth and slight back flow of liquid at the end of collapsing period can be seen. The mass flow rate was found to be dependent on the duty ratio and the operation frequency. As duty ratio increases, flow rate decreases gradually when the duty ratio exceeds 60%. Also as the operation frequency increases, the flow rate of the micropump decreases slightly.

  • PDF

A risk analysis for the determination of a tunnel support pattern (터널 지보패턴 결정을 위한 위험도 분석)

  • You, Kwang-Ho;Park, Yeon-Jun
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.5 no.3
    • /
    • pp.241-250
    • /
    • 2003
  • Rock mass is very inhomogeneous in nature and data obtained by site investigations and tests are very limited. For this reason, many uncertainties are to be included in the process of constructing structures in rock mass. In the design of a tunnel, support pattern, advance rate, and excavation method, which are important design parameters, must be determined to be optimal. However, it is not easy to determine those parameters. Moreover if those parameters are determined incorrectly, unexpected risk occurs such as decrease in the stability of a tunnel or economic loss due to the excessive supports etc. In this study, how to determine an optimal support pattern and advance rate, which are the important tunnel design parameters, is introduced based on a risk analysis. It can be confirmed quantitatively that the more supported a tunnel is, the larger reliability index becomes and the more stable the tunnel becomes. Also an optimal support pattern and advance rate can be determined quantitatively by performing a risk analysis considering construction cost and the cost of loss which can be occurred due to the collapse of a tunnel.

  • PDF

Review of Clinical Researches for Herbal Medicine Treatment on Nocturnal Enuresis in Children (소아 야뇨의 한약치료에 대한 임상연구 동향 -중의학 논문을 중심으로-)

  • Shin, Hye Jin;Lee, Boram;Lee, Jihong;Chang, Gyu Tae
    • The Journal of Pediatrics of Korean Medicine
    • /
    • v.32 no.2
    • /
    • pp.43-63
    • /
    • 2018
  • Objectives The purpose of this study is to evaluate the efficacy and safety of herbal medication for the treatment of nocturnal enuresis in children by analyzing randomized controlled trials conducted in China. Methods We searched literatures from China National Knowledge Infrastructure published up to 19 January, 2018. Selected literatures were collected and analyzed in order of publication year, and then demographic information, treatment method, duration of illness, duration of treatment, follow-up period, outcome measurement and adverse events. Results A total of 34 studies were selected for the analysis. In most studies, the total efficacy of the treatment group was reported to be higher than that of the control group, and the recurrence rate and complete cure rate were also found to be more effective in the herbal medicine treatment group. The most frequently used medical herb was Alpiniae Fructus (益智仁), and the use of medical herbs belong to tonifying yang (補陽藥), tonifying qi (補氣藥), and astringing essence strengthening collapse medicine (澁精縮尿止帶藥) were relatively high. The adverse events rate for the herbal medicine treatment group were significantly lower than those in the Western medicine treatment group. Conclusions This study showed that a herbal medicine treatment can be effective and safe option for treating pediatric nocturnal enuresis. However, additional well-designed clinical studies need to be performed to establish a basis.

A TCP-Friendly Congestion Control Scheme using Hybrid Approach for Enhancing Fairness of Real-Time Video (실시간 비디오 스트림의 공정성 개선를 위한 TCP 친화적 하이브리드 혼잡제어기법)

  • Kim, Hyun-Tae;Yang, Jong-Un;Ra, In-Ho
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.14 no.3
    • /
    • pp.285-289
    • /
    • 2004
  • Recently, due to the high development of the internet, needs for multimedia streams such as digital audio and video is increasing much more. In case of transmitting multimedia streams using the User Datagram Protocol (UDP), it may cause starvation of TCP traffic on the same transmission path, thus resulting in congestion collapse and enormous delay because UDP does not perform TCP-like congestion control. Because of this problem, diverse researches are being conducted on new transmission schemes and protocols intended to efficiently reduce the transmission delay of real-time multimedia streams and perform congestion control. The TCP-friendly congestion control schemes can be classified into the window-based congestion control, which uses the general congestion window management function, and the rate-based congestion control, which dynamically adjusts transmission rate by using TCP modeling equations and the like. In this paper, we suggest the square-root congestion avoidance algorithm with the hybrid TCP-friendly congestion control scheme which the window-based and rate-based congestion controls are dealt with in a combined way. We apply the proposed algorithm to the existing TEAR. We simulate the performance of the proposed TEAR by using NS, and the result shows that it gives better improvement in the stability needed for providing congestion control than the existing TEAR.

A TCP-Friendly Congestion Control Scheme using Hybrid Approach for Reduction of Transmission Delay for Real-Time Video Stream (실시간 비디오 스트림의 전송지연 축소를 위한 TCP 친화적 하이브리드 혼잡제어 기법)

  • 김형진;조정현;나인호
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.8 no.2
    • /
    • pp.304-309
    • /
    • 2004
  • Recently, the needs for multimedia stream such as digital audio and video in the Internet has increased tremendously. Unlike TCP, the UDP protocol, which has been used to transmit streaming traffic thorough the Internet, does not apply any congestion control mechanism to regulate the data flow thorough the shared network And it leads to congestion collapse of the Internet and results in long-term transmission delay. To avoid any adverse effect on the current Internet functionality, a now protocol of modification or addition of some functionality to perform congestion control and to reduce huge transmission delay in transmitting of multimedia stream are in study. TCP-friendly congestion control mechanism is classified into two : one is window-based congestion control scheme using general window management functionalities, the other is rate-based congestion control scheme using TCP modeling equation. In this paper, we propose an algorithm for improving the transmitting rate on a hybrid TCP-friendly congestion control scheme combined with widow-based and late-based congestion control for multimedia stream. And we also simulate the performance of improved TEAR implementation using NS. With He simulation results, we show that the improved TEAR can provide better fairness and lower rate fluctuations than TCP.

Analysis of Flooding DoS Attacks Utilizing DNS Name Error Queries

  • Wang, Zheng
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.6 no.10
    • /
    • pp.2750-2763
    • /
    • 2012
  • The Domain Name System (DNS) is a critical Internet infrastructure that provides name to address mapping services. In the past decade, Denial-of-Service (DoS) attacks have targeted the DNS infrastructure and threaten to disrupt this critical service. While the flooding DoS attacks may be alleviated by the DNS caching mechanism, we show in this paper that flooding DoS attacks utilizing name error queries is capable of bypassing the cache of resolvers and thereby impose overwhelming flooding attacks on the name servers. We analyze the impacts of such DoS attacks on both name servers and resolvers, which are further illustrated by May 19 China's DNS Collapse. We also propose the detection and defense approaches for protecting DNS servers from such DoS attacks. In the proposal, the victim zones and attacking clients are detected through monitoring the number of corresponding responses maintained in the negative cache. And the attacking queries can be mitigated by the resolvers with a sample proportion adaptive to the percent of queries for the existent domain names. We assess risks of the DoS attacks by experimental results. Measurements on the request rate of DNS name server show that this kind of attacks poses a substantial threat to the current DNS service.

The Effect of Jellyfish (Nemopilema nomurai) Fertilizer on Tree Growth in Hillside Erosion Control Works

  • Kim, Yong-Rae;Kim, Suk-Woo;Damdinsuren, Enkhjargal;Ezaki, Tsugio;Chun, Kun-Woo
    • Journal of Forest and Environmental Science
    • /
    • v.28 no.4
    • /
    • pp.227-231
    • /
    • 2012
  • Reforestation is one of the most important ways to reduce erosion soil. The objective of this study was to determine the effect of jellyfish soil amendment on seedling growth for reforestation. 100g jellyfish soil amendment was applied into planting hole for the purpose of improvement of the Chamaecyparis obtusa seedling growth. Results showed that during growing period, mortality were 4.4% for the fertilized group and 8.3% for control group. The seedling average height and root diameter were 95.0 cm and 1.07 cm in fertilized group and 40.6 cm and 0.74 cm in control group. The fertilized group was found to be superior (by 1 to 5%) to control group in terms of mortality rate, seedlings height, and root diameter. The positive growth of the fertilized group can be due the increase in soil moisture and the higher availability of nutrients to the plants from jellyfish fertilizer.

Probing of Microscale Phase-Change Phenomena Based on Michelson Interforometry (Michelson 간섭계를 응용한 미세 상변화 현상 계측)

  • Kim, Dong-Sik;Park, Hee-K.;Grigoropoulos, Costas P.
    • Proceedings of the KSME Conference
    • /
    • 2001.06d
    • /
    • pp.348-353
    • /
    • 2001
  • Experimental schemes that enable characterization of phase-change phenomena in the micro scale regime is essential for understanding the phase-change kinetics. Particularly, monitoring rapid vaporization on a submicron length scale is an important yet challenging task in a variety of laser-processing applications, including steam laser cleaning and liquid-assisted material ablation. This paper introduces a novel technique based on Michelson interferometry for probing the liquid-vaporization process on a solid surface heated by a KrF excimer laser pulse (${\lambda}=248nm,\;FWHM=24\;ns$) in water. The effective thickness of a microbubble layer has been measured with nanosecond time resolution. The maximum bubble size and growth rate are estimated to be of the order of $0.1{\mu}m\;and\;1\;m/s$, respectively. The results show that the acoustic enhancement in the laser induced vaporization process is caused by bubble expansion in the initial growth stage, not by bubble collapse. This work demonstrates that the interference method is effective for detecting bubble nucleation and microscale vaporization kinetics.

  • PDF