• Journal of Periodontal and Implant Science
• /
• v.29 no.1
• /
• pp.51-63
• /
• 1999

Exposure of the root surface due to gingival recession after periodontal surgery, elicit pain response when exposed to mechanical, heat, chemical or osmotic irritation. Especially patients treated with periodontal surgery, show high frequency. There have been reports that the 1 out of 7 patients complains of dentinal hypersensitivity. There have been many studies on the clinical effects of various materials on the treatment of dentinal hypersensitivity. The purposes of this study were to evaluate the effect of sodium chloride and potassium oxalate and to observe the relationship between the dentinal hypersensitivity and surface characteristics such as dentinal tubule size and number. This study included 20 teeth which were scheduled for extraction and had no pulpal disease. These teeth were divided into Root planing group, EDTA group, NaCl group and Oxalate group. Dentinal hypersensitivity is measured by tactile, pressured air and cold water using NRS (Numerical Rating Scales). Teeth were extracted under local anesthesia and each specimen was sectioned to a size about 3 X 5 mm and was examined under the scanning electron microscope (X2,000) The results were as follows, 1. The EDTA group exhibited significantly increased dentinal hypersensitivity comparing with the other groups. 2. The NaCl and Oxalate groups showed significantly reduced dentinal hypersensitivity comparing with the EDTA group. 3. As a method for dentinal hypersensitivity measurement, it was presumed thet tactile sensitivity test was not sensitive method but air blast test and cold water test were adequate method. 4. In a SEM study, the root planing group exhibited amorphous smear layer and showed no dentinal tubule orifice, but the EDTA group showed the large number of dentinal tubules. On the other hand, the NaCl and Oxalate groups did not show exposed dentinal tubules. The NaCl group showed more rough root surface than the EDTA group, and the Oxalate group showed many participates to be presumed as calcium oxalate particle. As the results from this study, root planing couldn't expose the dentinal tubule and NaCl and potassium oxalate occluded exposed dentinal tubule effectively. Dentinal hypersensitivity has close relationship with the exposure of dentinal tubules, especially with it's size and number.

• The Korean Journal of Mycology
• /
• v.30 no.2
• /
• pp.119-123
• /
• 2002

In the previous studies, we surveyed 68 Korean wild mushrooms for their hemolytic activity and found that cold-water extract of Hebeloma crustuliniforme contained heat-resistant hemolysin. In this study, partially purified hemolysin of the mushroom was obtained by cold-water extraction followed by precipitation with ammonium sulfate, solubility fractionation and then dialysis. The hemolysin was found to be > 12,000 in molecular weight and its optimal hemolytic temperature was $37^{\circ}C$ and it's hemolytic activity, on washed erythrocytes and unwashed erythrocytes, respectively, was in the order of sheep > rat > human ${\geq}$ mouse > chicken and sheep > mouse > human ${\geq}$ rat > chicken. When ip injected into ICR mice at 1.38 mg/kg, it incurred prompt hemolysis as well as severe renal toxicity and hepatotoxicity. These results strongly suggest that the toxicity of Hebeloma crustuliniforme, which had been well-known as a toxic wild mushroom, may be at least partly due to its hemolysin.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.3
• /
• pp.144-157
• /
• 2022

Noble gases, which are chemically inert and behave conservatively in marine environments, have been used as tracers of physical processes such as air-sea gas exchange, mixing of water masses, and distribution of glacial meltwater in the ocean. For precise measurements of Ne, Ar, and Kr, we developed a mass spectrometric system consisting of a quadrupole mass spectrometer (QMS), a high vacuum preparation line, an activated charcoal cryogenic trap (ACC), and a set of isotope standard gases. The high vacuum line consists of three sections: (1) a sample extraction section that extracts the dissolved gases in the sample and mixes them with the standard gases, (2) a gas preparation section that removes reactive gases using getters and separates the noble gases according to their evaporation points with the ACC, and (3) a gas analysis section that measures concentrations of each noble gas. The ACC attached to the gas preparation section markedly lowered the partial pressures of Ar and CO₂ in the QMS, which resulted in a reduced uncertainty of Ne isotope analysis. The isotope standard gases were prepared by mixing ²²Ne, ³⁶Ar, and ⁸⁶Kr. The amounts of each element in the mixed standard gases were determined by the reverse isotope dilution method with repeated measurements of the atmosphere. The analytical system achieved precisions for Ne, Ar, and Kr concentrations of 0.7%, 0.7%, and 0.4%, respectively. The accuracies confirmed by the analyses of air-equilibrated water were 0.5%, 1.0%, and 1.7% for Ne, Ar, and Kr, respectively.

• Korean Journal of Pharmacognosy
• /
• v.9 no.3
• /
• pp.149-156
• /
• 1978

The result of the study about the cultivation, the constituents, the sweetenity, and the development of preparations of Stevia and Hydrangea are as follows: 1. Hydrangea thrived at $200{\sim}1,400m$ above the sea-level, and the good ones were brought up at $600{\sim}1,200m$. 2. The good ones which belonged to the genera of Hydrangea were produced in the damp, dark and cold place. 3. The growth and cultivated yield of Stevia was not significantly influenced by the acidity of the soil. 4. The best season was May and June for propagation of Stevia by cutting method. 5. The growth rate of Stevia and Hydrangea was really good in the sandy fertile soil, but in the mucotic soil it was not suitable. 6. The extraction and separation of phyllodulcin by solvent had many difficulties, because it was very soluble in water, ethanol, ether, petroleum ether, acetone and benzene, etc. 7. The solubility of stevioside on the solvent was as follows: It was very soluble in water and methanol, slightly soluble in ethanol and acetone, and insoluble in ether, petroleum ether and chloroform. 8. The alkaloid reaction by Mayer reagent in Hydrangea extract was positive. 9. The ashification rate of Stevia was 8.66% to 8.72% and that of Hydrangea 17.02% to 17.04%. 10. The tannin of Stevia leaf was 7.80% to 7.88% and its of Hydrangea decreased 9.46% to 6.08% by fermentation. 11. The percent rates in minimum concentration-occurring sweetness in sugar, glycyrrhiza methanol extract, Hydrangea water extract, Stevia leaf water extract, decoction of Stevia's leaf, decoction of Stevia's stem were as follows: 1.2, 0.1, 0.1, 0.2, 0.4, 0.01, 0.1, 0.6. and sweetenity ratios of those were 1, 12, 12, 6, 3, 64, 12, 2, 12. It was very meaningful to develop preparations of stevia as stevioside, micronized powder, water extract, methanol extract and compound teas and in Hydrangea, water extract, methanol extract, single tea, and compound teas were less meaningful. 13. The genera of Hydrangea which is natural species in Korea was positive in phyllodulcin-identification test, but it was not available to make the sweet tea because of having a little content.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.3
• /
• pp.239-254
• /
• 2015

Little information on HUmic-Like Substances (HULIS) in ambient particulate matter has been reported yet in Korea. HULIS makes up a significant fraction of the water-soluble organic mass in the atmospheric aerosols and influence their water uptake properties. In this study 24-hr $PM_{2.5}$ samples were collected between December 2013 and October 2014 at an urban site in Gwangju and analyzed for organic carbon (OC), elemental carbon (EC), water-soluble OC (WSOC), HULIS, and ionic species, to investigate possible sources and formation processes of HULIS. HULIS was separated using solid phase extraction method and quantified by total organic carbon analyzer. During the study period, HULIS concentration ranged from 0.19 to $5.65{\mu}gC/m^3$ with an average of $1.83{\pm}1.22{\mu}gC/m^3$, accounting for on average 45% of the WSOC (12~ 73%), with higher in cold season than in warm season. Strong correlation of WSOC with HULIS ($R^2=0.91$) indicates their similar chemical characteristics. On the basis of the relationships between HULIS and a variety of chemical species (EC, $K^+$, $NO_3{^-}$, $SO_4{^{2-}}$, and oxalate), it was postulated that HULIS observed during summer and winter were likely attributed to secondary formation and primary emissions from biomass burning (BB) and traffics. Stronger correlation of HULIS with $K^+$, which is a BB tracer, in winter ($R^2=0.81$) than in summer ($R^2=0.66$), suggests more significant contribution of BB emissions in winter to the observed HULIS. It is interesting to note that BB emissions may also have an influence on the HULIS in summer, but further study using levoglucosan that is a unique organic marker of BB emissions is required during summer. Higher correlation between HULIS and oxalate, which is mainly formed through cloud processing and/or photochemical oxidation processes, was found in the summer ($R^2=0.76$) than in the winter ($R^2=0.63$), reflecting a high fraction of secondary organic aerosol in the summer.

• Korean Journal of Food Science and Technology
• /
• v.10 no.2
• /
• pp.162-172
• /
• 1978

We have studied to develop a process for the preparation of protein isolates free of isothiocyanate and oxazolidine-thione when defatted meal was extrracted with a cold alkaline solution at pH11.0. The rapeseed protein isolates were separated at $0^{\circ}C$ using 1% sodium algiante of 500 cps as a precipitation aid, also. The proteins had original colors, namely, a grey curd at pH 6.7, a light cream at pH 5.6 and a yellow cream at pH 5.0, The purity and the color was improved by washing with water and freez-drying with acetone, not at room temperature. A countercurrent procedure was a prerequisite for a continuous large scale production of protein isolates.

• Food Science of Animal Resources
• /
• v.39 no.6
• /
• pp.918-933
• /
• 2019

Cacao has been shown to have antioxidant effects and health benefits. However, the applicability of cacao as a meat preservative has not been thoroughly evaluated. Here, we examined the effects of cacao nib extracts (CEs) on suppression of fat oxidation and enhancement of quality characteristics of pork patties. Cacao nib powder was extracted in distilled water or 50%, 70%, or 99% ethanol. CEs prepared using 70% ethanol had the highest total phenolic and total flavonoid contents, and the highest 1,1-diphenyl-2-picrylhytdrazyl radical and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activities. Decompression-concentrated CEs prepared using 70% ethanol and 0.1% ascorbic acid were added to pork patties, and the physiochemical properties of the patties were measured. The pH of all pork patties increased during storage, but tended to decrease according to the CEs content. CEs enhanced the preservation of redness and texture of the pork patties during storage. Analysis of thiobarbituric acid reactive substances (TBARS) in patties revealed that fat oxidation was highly suppressed in all treatment groups containing CEs during storage, and TBARS values decreased according to CE content. Treatment with 0.1% CE reduced fat oxidation to a level similar to that of treatment with 0.1% ascorbic acid. Consumer flavor preference increased according to CE content, and overall preference was the highest for patties prepared with 0.05% and 0.075% CEs. Overall, 70% ethanol was found to be the optimal concentration for extraction of cacao nibs, and adding 0.05% or 0.075% CEs to pork patties yielded the highest quality.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2008

As conventional oil and gas reservoirs become depleted, interests for oil sands has rapidly increased in the last decade. Oil sands are mixture of bitumen, water, and host sediments of sand and clay. Most oil sand is unconsolidated sand that is held together by bitumen. Bitumen has hydrocarbon in situ viscosity of >10,000 centipoises (cP) at reservoir condition and has API gravity between $8-14^{\circ}$. The largest oil sand deposits are in Alberta and Saskatchewan, Canada. The reverves are approximated at 1.7 trillion barrels of initial oil-in-place and 173 billion barrels of remaining established reserves. Alberta has a number of oil sands deposits which are grouped into three oil sand development areas - the Athabasca, Cold Lake, and Peace River, with the largest current bitumen production from Athabasca. Principal oil sands deposits consist of the McMurray Fm and Wabiskaw Mbr in Athabasca area, the Gething and Bluesky formations in Peace River area, and relatively thin multi-reservoir deposits of McMurray, Clearwater, and Grand Rapid formations in Cold Lake area. The reservoir sediments were deposited in the foreland basin (Western Canada Sedimentary Basin) formed by collision between the Pacific and North America plates and the subsequent thrusting movements in the Mesozoic. The deposits are underlain by basement rocks of Paleozoic carbonates with highly variable topography. The oil sands deposits were formed during the Early Cretaceous transgression which occurred along the Cretaceous Interior Seaway in North America. The oil-sands-hosting McMurray and Wabiskaw deposits in the Athabasca area consist of the lower fluvial and the upper estuarine-offshore sediments, reflecting the broad and overall transgression. The deposits are characterized by facies heterogeneity of channelized reservoir sands and non-reservoir muds. Main reservoir bodies of the McMurray Formation are fluvial and estuarine channel-point bar complexes which are interbedded with fine-grained deposits formed in floodplain, tidal flat, and estuarine bay. The Wabiskaw deposits (basal member of the Clearwater Formation) commonly comprise sheet-shaped offshore muds and sands, but occasionally show deep-incision into the McMurray deposits, forming channelized reservoir sand bodies of oil sands. In Canada, bitumen of oil sands deposits is produced by surface mining or in-situ thermal recovery processes. Bitumen sands recovered by surface mining are changed into synthetic crude oil through extraction and upgrading processes. On the other hand, bitumen produced by in-situ thermal recovery is transported to refinery only through bitumen blending process. The in-situ thermal recovery technology is represented by Steam-Assisted Gravity Drainage and Cyclic Steam Stimulation. These technologies are based on steam injection into bitumen sand reservoirs for increase in reservoir in-situ temperature and in bitumen mobility. In oil sands reservoirs, efficiency for steam propagation is controlled mainly by reservoir geology. Accordingly, understanding of geological factors and characteristics of oil sands reservoir deposits is prerequisite for well-designed development planning and effective bitumen production. As significant geological factors and characteristics in oil sands reservoir deposits, this study suggests (1) pay of bitumen sands and connectivity, (2) bitumen content and saturation, (3) geologic structure, (4) distribution of mud baffles and plugs, (5) thickness and lateral continuity of mud interbeds, (6) distribution of water-saturated sands, (7) distribution of gas-saturated sands, (8) direction of lateral accretion of point bar, (9) distribution of diagenetic layers and nodules, and (10) texture and fabric change within reservoir sand body.

• Food Science of Animal Resources
• /
• v.34 no.3
• /
• pp.387-394
• /
• 2014

This study was conducted to determine the effect of duck feet gelatin concentration on the physicochemical, textural and sensory properties of duck meat jellies. Duck feet gelatin was prepared with acidic swelling and hot water extraction. In this study, four duck meat jellies were formulated with 3, 4, 5, and 6% duck feet gelatin, respectively. In the preliminary experiment, the increase in duck feet gelatin ranged from 5 to 20%, resulting in a significant (p<0.001) increase in the color score, but a decline in the hardness and dispersibility satisfaction scores. An increase in the added amount of duck feet gelatin contributed to decreased lightness and increased protein content in duck meat jellies. Regarding the textural properties, increase in the added amount of duck feet gelatin highly correlated with the hardness in the center (p<0.01, $R^2=0.91$), and edge (p<0.01, $R^2=0.89$), of duck meat jellies. Meanwhile, the increase in duck feet gelatin decreased the score for textural satisfaction; duck meat jellies containing 6% duck feet gelatin had a significantly lower textural satisfaction score, than those containing 3% duck feet gelatin (p<0.05). Furthermore, a significant difference in the overall acceptance of duck meat jellies formulated with 5% duck feet gelatin was observed, as compared to those prepared with 3% duck feet gelatin. Therefore, this study suggested that duck feet gelatin is a useful ingredient for manufacturing cold-cut meat products. In consideration of the sensory acceptance, the optimal level of duck feet gelatin in duck meat jellies was determined to be 5%.

• The Journal of Korean Medicine
• /
• v.23 no.4
• /
• pp.161-168
• /
• 2002

Objectives: Hwangryunhaedok-tang (Huang-lian-jie-du-tang, HRHDT, 黃連解毒湯) is a traditional Korean herbal medicine that is formulated with Coptidis Rhizoma, Phellodendri Cortex, Scutellariae Radix and Gardeniae Fructus. HRHDT is cold (寒) and bitter (苦) in nature and has general properties of clearing heat and detoxifying (淸熱解毒), strengthening the stomach and settling the liver (健胃平肝), and reducing inflammation, fever and swelling. This formula can prevent and treat artherosclerosis, hyperplasia of the endothelium, cerebral fluid circulation, cerebral vascular deterioration through aging, impairment of neurotransmitters, or disruption of the functioning of the cerebral cortex following infection or trauma. The purpose of the study reported here was to determine the neuroprotective effect of HRHDT on global ischemia induced by 4-vessel occlusion in Wistar rats. Methods: HRHDT extract was lyophilized after extraction with 85% methanol and 100% water. Rats were induced to 10 minutes of forebrain ischemia by 4-vessel occlusion (4-VO) and reperfused again. HRHDT was administered with a dose of 100 mg/kg, and 500 mg/kg of 85% methanol extracts and 100 mg/kg of 100% water extracts, respectively, at 0 min and 90 min after 4-VO. Rats were killed at 7 days after ischemia and the number of CA1 pyramidal neurons was counted in hippocampal sections stained with cresyl violet. Results: Body temperature of animals showed no significant difference between saline-treated groups and HRHDT extracts-treated groups until 5 hours of reperfusion. This result indicated that neuroprotective effects of HRHDT extracts were not due to hypothermic effects. The administration of HRHDT showed a significant neuroprotective effect on hippocampal CA1 neurons at 7 days after ischemia compared to the saline-treated group (P<0.001). HRHDT methanol extracts of 100 mg/kg, 500 mg/kg and HRHDT water extracts of 100 mg/kg showed 88.5%, 98.3% and 95.1 % neuroprotection, respectively. Conclusions: The results of this study demonstrate that administration of HRHDT is highly effective in reducing neuronal damage in response to transient global cerebral ischemia. HRHDT may involve many mechanisms that might account for its high degree of efficacy. A number of factors including free radicals, glutamate, calcium overload, NO, and various cytokines have been proposed to have an important role in causing neuronal death after short periods of global ischemia. Further studies are needed to know the neuroprotective mechanisms of HRHDT.