• 에너지공학
• /
• 제24권2호
• /
• pp.144-153
• /
• 2015

저온에서 경유의 파라핀 왁스 생성 및 침전현상은 차량의 저온성능에 악영향을 준다. 본 연구에서는 경유에 바이오디젤, 등유, 저온특성첨가제를 혼합한 연료에 대해 연료조성에 따른 담점, 필터막힘점, 유동점 변화를 분석하였고, 경유의 저온특성에 따른 차량의 저온성능에 대해 평가하였다. 경유는 유동성향상 첨가제(WAFI)와 등유유분의 혼합량이 증가할수록 저온특성이 개선되었으며, 바이오디젤 혼합량이 증가할수록 저온특성이 악화되었다. WAFI는 필터막힘점 개선에, 등유유분은 담점 개선에 효과적이었다. 차량의 저온성능에 대하여 필터막힘점과 유동점의 영향성은 확인하였으나, 담점은 큰 영향이 없었다. 필터막힘점은 차량에 대해 저온에서의 운행가능 한계를 반영하였다.

• 한국건축시공학회지
• /
• 제12권3호
• /
• pp.291-298
• /
• 2012

For cold weather concreting, frost damage at early age is generated in the concrete, and problems such as delaying of setting and hardening and lowering of strength manifestation emerge due to the low outside air temperature at the early stage of pouring, making the selection of an effective curing method critically important. Unfortunately, the tent sheet currently used as the curing film for heating insulation at work sites, not only has the problems of inferior permeability and extremely deteriorated airtightness, but a phenomenon of continuous fracturing is also generated along the direction of fabric of the material itself, presenting difficult circumstances for maintaining adequate curing temperature. The aim of this study was to develop an improved bubble sheet type curing film for heating insulation of cold weather concrete by combining mesh-tarpaulin, which has excellent tension properties, with bubble sheet, which offers superior insulation performance. The analysis showed that the improved curing film in which BBS1 is stacked to MT was a suitable replacement for curing films currently in use, as it has better permeability, tension property, and insulation performance than the T type film used at work sites today.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.89-90
• /
• 2016

In the cold-weathering(Mongolian region) concrete construction, this purpose of this research is the evaluation on the performance of concrete using various binders such as Mongolian cement, Chinese cement and high blane-self heated cement.

• 대한조선학회논문집
• /
• 제50권6호
• /
• pp.450-457
• /
• 2013

For the design guide of a vessel operating in cold region, numerical analysis was carried out to evaluate the weather-tight door which installed the heating cables by using ANSYS 13.0 Transient Thermal. The numerical analysis was performed by considering Advection-Diffusion equation. This study based on the experimental results of 'A study on Anti-Icing Technique for Weather-Tight Door of Ice-Strengthened Vessels'(Jeong, et al., 2011a) in KIOST. For validation of the numerical analysis results, the cold chamber experimental data measured by the heat sensors in certain location of the weather-tight door was used. The external environmental temperature which varies from $5^{\circ}C$ to $-55^{\circ}C$ was considered in numerical analysis. Also three different heating cables which have the heat capacity of 33W/m, 45W/m and 66W/m were adapted for the design parameters to be the most efficient and guidelines for anti-icing design of the weather tight door.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.645-650
• /
• 2003

The purpose of this study is to provide the optimum mix design of cold weather concrete to be placed at the foundation structures in substation. The basic performance tests including slump and slump flow, air content, compressive strength and freezing & thawing resistance were conducted for cold weather concrete by varying with W/C ratios such as 40%, 50% and 60% and air contents such as 3%, 4%, 5% and 6%. The effect on durability of concrete corresponding to the increasing amount of air content and W/C ratio was evaluated and the optimum mix design was recommended. From this study, the concrete mix design containing 6% of air content and 45% of W/C ratio is recommended for the foundation concrete of substation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.199-204
• /
• 2000

When fresh concrete is exposed to low temperature, the concrete may suffer from the frost damage at early ages and the strength development may be delayed. To solve such problems of cold weather concreting, admixtures called agent for enduring cold climate are developed to prevent the fresh concrete from being frozen at early ages In this study, the experiments are carried out on several kinds of agent for enduring cold climate to present their performance. According to experimental results, most kinds of agent for enduring cold climate show the satisfactory properties of decreasing the freezing point and acceleating the cement hydration in low temperature environment, which is available for placing concrete in spite of cold weather.

• 한국건축시공학회지
• /
• 제21권1호
• /
• pp.21-29
• /
• 2021

본 연구는 한중 환경에서 가열 보온양생을 실시한 벽식구조 아파트의 슬래브 상부 및 벽체를 대상으로 2중 버블시트 포설에 따른 온도이력 및 강도발현 특성을 저자 등에 의해 이전 연구에서 개발된 무선센서 네트워크인 Concrete IoT Management System(CIMS)를 이용하여 실시간 모니터링 및 추정하고자 하였다. 분석결과 버블시트의 단열성능에 기인하여 구조체 콘크리트의 온도가 높게 나타났다. 또한, CIMS의 경우는 콘크리트 내부온도를 30 m까지 양호하게 무선센서 네트워크로 스마트폰에 전송되어 적산온도 및 실시간 압축강도 측정으로 효율적인 초기 품질관리가 가능할 수 있음을 알 수 있었다. 초기 품질관리 결과로서 압축강도는 7일 이내에서 약 2 MPa 이내의 오차로 추정될 수 있음에 따라 버블시트의 단열효과까지 포함하여 실무에서는 거푸집 존치기간을 1사이클 당 1일 정도 단축하는 공정관리 측면에서 효과도 얻을 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.617-620
• /
• 2008

최근 대규모 건축물의 등장으로 말미암아 연중 시공이 이루어지고 있으며, 한중 콘크리트 시공시동결에 의한 콘크리트 품질저하의 문제점이 부각되어지고 있는 실정이다. 따라서 본 연구에서는 한중콘크리트의 품질 확보 방안중의 하나로서 포름산-아세테이트산염을 주성분으로 한 무염화형 방동제를 적용한 콘크리트의 품질 및 특성에 대하여 성능 검토를 실시하였다. 포름산-아세테이트산염계 방동제의 적용시험을 수행한 결과, 영하권 외기 양생 조건에서 경화콘크리트 특성은 방동제를 첨가하지 않는 시료에 비하여 모든 재령에서 우수한 강도 발현 특성을 나타내고 있었으며, 장기재령에서도 강도 저하 현상이 발생하지 않았다. 또한 굳지않은 콘크리트의 유동특성 및 경화 콘크리트의 특성을 고려한 결과 결합재의 3.0%내외의 방동제 적용량이 가장 우수한 결과를 나타내었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.19-22
• /
• 2003

The purpose of this study is to analyze the curing effect of planar surface heater for concreting in cold weather. Some experiments were conducted to evaluate the temperature history of concrete structures cured with heating sheets. Results are as follows ; (1) The temperature of concrete showed continuously rising trend with the heating by planar surface heater under the cold environmental condition of 3~-12$^{\circ}C$. And after about 24 hours the maximum temperature of concrete was reached at 25~3$0^{\circ}C$. (2) The temperature of slab concrete heated by planar surface heater of 130W/$m^2$ was at least $25^{\circ}C$ higher than that of an exterior air, and the curing performance was much more effective than heating by hot wind machine. (3) Through the curing by planar surface heater for 48 hours, the concrete maturity of about 1.5 times to heating by hot wind machine was acquired.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.37-38
• /
• 2011

This study is to analyze and compare improved curing sheet with blue sheet in order to verify the performance related to tensile stress. As results, it is confirmed that improved curing sheet(MP+BBS1) is better than the blue sheet at using field already. Synthetically, curing sheet improved by MP is analyzed to be available instead of the original because it is superior to tensile stress.