• 제목/요약/키워드: cold temperature dry

검색결과 167건 처리시간 0.03초

동계 서해의 해황과 기상인자와의 관계 (A Relationship between Oceanic Conditions and Meteorological Factors in the Western Sea of Korea in Winter)

  • 고우진;김상우;김동선
    • 해양환경안전학회지
    • /
    • 제12권1호
    • /
    • pp.23-32
    • /
    • 2006
  • 동계 서해에서 해황과 기상인자와의 상호 관련성에 대해서 조사하였다. 수온의 수평분포는 수심이 얕은 연악역이 외해역보다 저수온으로 12월과 2월사이에 외해역에서 $3^{\circ}C$, 연안역에서는 $6^{\circ}C$ 정도의 큰 수온 하강을 보였다. 염분의 분포는 북쪽해역이 연안역과 남쪽해역보다 저농도를 보였다. 또한, 하계에 남북방향으로 형성되었던 등염선이 동계에는 북서에서 남동 방향으로 형성한다. 한국 서해연안의 기온과 연안의 표층수온 사이에는 기온이 상승하면 수온이 상승하고 기온이 하강하면 수온도 하강하는 정의 상관관계를 보인다. 서해 외해의 표층수온은 잠열속과 현열속에 의한 해양에서의 방출열량과 역의 상관관계를 보인다. 동계 서해 연안지역 기온과 연안역 표층염분과의 관계는 기온이 상승하면 연안역의 염분이 증가하고, 수온이 하강하면 염분이 낮아지는 정의 상관관계를 보인다. 또한 서해의 하계($6{\sim}9$월) 강수량은 10월과 12월보다 다음해 동계 2월의 염분분포에 크게 영향을 미치고 있다.

  • PDF

CMIP5 Historical 시나리오에 근거한 WRF를 이용한 한반도 중심의 동북아시아 상세기후 (Present-Day Climate of the Korean Peninsula Centered Northern East Asia Based on CMIP5 Historical Scenario Using Fine-Resolution WRF)

  • 안중배;홍자영;서명석
    • 대기
    • /
    • 제23권4호
    • /
    • pp.527-538
    • /
    • 2013
  • In this study, climate over Korea based on the Historical scenario induced by HadGEM2-AO is simulated by WRF. For this purpose, a system that can be used be for numerical integration over the Far East Asian area of the center of the Korean Peninsula with 12.5 km-horizontal resolution was set-up at "Haebit", the early portion of KMA Supercomputer Unit-3. Using the system, the downscaling experiments were conducted for the period 1979-2010. The simulated results of HadGEM2-AO and WRF are presented in terms of 2 m-temperature and precipitation during boreal summer and winter of Historical for the period 1981~2005, compared with observation. As for the mean 2 m-temperature, the general patterns of HadGEM2-AO and WRF are similar with observation although WRF showed lower values than observation due to the systematic bias. WRF reproduced a feature of the terrain-following characteristics reasonably well owing to the increased horizontal resolution. Both of the models simulated the observed precipitation pattern for DJF than JJA reasonably, while the rainfall over the Korean Peninsula in JJA is less than observation. HadGEM2-AO in DJF 2 m-temperature and JJA precipitation has warm and dry biases over the Korean Peninsula, respectively. WRF showed cold bias over JJA 2 m-temperature and wet bias over DJF precipitation. The larger bias in WRF was attributed to the addition of HadGEM2-AO's bias to WRF's systematic bias. Spatial correlation analysis revealed that HadGEM2-AO and WRF had above 0.8 correlation coefficients except for JJA precipitation. In the EOF analysis, both models results explained basically same phase changes and variation as observation. Despite the difference in mean and bias fields for both models, the variabilities of the two models were almost similar with observation in many respects, implying that the downscaled results can be effectively used for the study of regional climate around the Korean Peninsula.

효소저항성 쌀전분의 첨가가 마들렌의 품질 및 텍스처 특성에 미치는 영향 (Effect of Addition of Enzyme-Resistant Rice RS3 on Quality and Textural Characteristics of Madeleine)

  • 김완수
    • 한국생활과학회지
    • /
    • 제19권1호
    • /
    • pp.191-201
    • /
    • 2010
  • This study attempted to examine the application of retrograded starch (RS3) isolated from rice flour into Madeleine which is easy to make, supply enough energy and micro nutrients with adequate drinks, and prevent an adult disease. This could be a popular food to anyone regardless of age and gender who avoid rice and become high value-added, processed rice foods. For this, control Madeleine was made from wheat flour and an experimental one was made from 5 or 10% rice RS3 addition as well as wheat flour. Four different types of rice were produced from Premium Ho-Pyong Rice, that is, dry milled rice flour(RFD), soaked for 8 hours and milled, followed by air-dried rice flour(RFW), rice starch(RST), and retrograded rice starch or enzyme-resistant starch(RS3). The results found were as follows: Proximate compositions were decreased with soaking to make RFW, RST and RS3, compared to RFD. RS3 had the highest L, +a and ${\Delta}E$ with the lowest +b, changing it to a dark color, explaining the need for heat control during processing. At $80^{\circ}C$, the swelling power was shown in the order of RST>RFW>RFD>RS3 and the solubility of RS3 was the highest. There were significant differences in viscosities of peak, trough, cold, breakdown and total setback of all rice samples using RVA (p<0.001). Due to the pH of RS3, the Madeleine batter became acidic (p<.01) and expanded, resulting in more air cells and open texture. With an increasing RS3 level in Madeleine, several textural attributes among 'fresh' and 'stored at room temperature' Madeleine samples were significantly different by using Texture Analyzer. While the addition of RS3 in Madeleine did not significantly affect the sensory evaluation, indicating RS3 isolated from rice as a beneficial ingredient for processed rice products.

Rhodotorula glutinis 유래의 고효율 재조합 Epoxide Hydrolase를 이용한 라세믹 Styrene Oxide의 비대칭 광학분할 (Asymmetric resolution of racemic styrene oxide using recombinant Escherichia coli harboring epoxide hydrolase of Rhodotorula glutinis)

  • 박규덕;최성희;김희숙;이은열
    • KSBB Journal
    • /
    • 제23권5호
    • /
    • pp.369-374
    • /
    • 2008
  • Rhdotorula glutinis epoxide hydrolase 유전자를 pColdI 벡터 와 pET-21b(+) 벡터에 재조합하여 제작한 E. coli를 생촉매로 사용하여 라세믹 styrene oxide에 대하여 회분식 가수분해 반응을 실시하였다. pET-21b(+)/RgEH 재조합 플라스미드 DNA를 가진 E. coli를 $15^{\circ}C$에서 저온 배양할 때 수용성 단백질 형태로 가장 많이 발현되었고, 입체선택적 가수분해 활성과 촉매 안정성이 가장 좋았다. 라세믹 styrene oxide 20 mM에 대하여 반응온도 $30^{\circ}C$에서는 반응시간 20분 동안에 수율 24.0%로 (S)-styrene oxide를 얻은 반면에, 반응온도를 $10^{\circ}C$로 낮추고 0.5% (w/v) Tween 20을 첨가하고 반응시키면 광학순도 99.0% ee 이상의 (S)-styrene oxide을 46.0%의 수율로 얻을 수 있었다. 최적조건에서 E 값은 6.68이었으며, 100 mM의 라세믹 styrene oxide에 대해서는 반응시간 50분에 이론 수율 50% 대비 40%의 높은 수율로 (S)-styrene oxide를 얻을 수 있었다.

고냉지 사료작물 윤작체계 조사연구 (Studies on the Rotation System to Forage Crop Cultivation at the Alpine Area)

  • 한성윤;김대진
    • 한국초지조사료학회지
    • /
    • 제13권4호
    • /
    • pp.300-304
    • /
    • 1993
  • 평야지보다 일조량과 적산온도가 다소 적은 고냉지에 적합한 사료작물 윤작체계를 구명하여 토지의 이용성 및 단위생산성을 제고하여 조사료 생산기반을 확대시키고자 호맥+숙기가 다소 틀린 옥수수조생종, 중생종, 만생종으로 9개 품종의 작부체계를 공시하여 2모작 작부체계를 확립고자 해발 800m의 대관령지역에서 시험한 결과를 요약하면 다음과같다. 1. 높고 추운 대관령 지역에서도 양호하게 호맥을 재배할 수 있다. 2. 호맥후작으로 도입되는 옥수수는 구태어 조생종이나, 중생종이 아니라도 대관령 지역같은 고랭지에서도 만생종 옥수수재배가 가능하다. 3. 호맥에 이은 옥수수재배의 2모작으로 건물량이나 생초수량으로 약 30%의 증수가 가능하다. 4. 가장 우수한 사료작물로서 열대성 작물인 옥수수는 지형이나 지역적인 환경변이 즉, 고도의 상승에 따라 야기되는 기온의 저온화 현상에 의해 숙기나 발육상태가 단축되거나 늦어지기도 한다.

  • PDF

한옥의 건축요소 솔리드 모델링을 통한 열환경 평가에 관한 연구 (A Study on the Thermal Environment Evaluation of 'Hanok' considering Solid Model of Building Elements)

  • 박동소;신동진
    • 한국산학기술학회논문지
    • /
    • 제14권2호
    • /
    • pp.955-961
    • /
    • 2013
  • 본 연구는 친환경 건축의 대안으로 부각되고 있는 한옥의 열환경 평가를 수행하기 위하여 한옥을 구성하고 있는 건축요소의 전열 메카니즘을 규명하기 한옥건축부재의 규격화와 모델링을 통하여 열환경을 평가하였다. 최근 친환경 건축, 생태건축의 모델로 일반의 한옥 선호도는 높아지고 있으나, 한옥의 우수성이 정성적으로만 평가되고 있다. 이에 한옥의 건축재료 및 형태와 같은 건축요소를 고려, 한옥 건축요소의 Geometry를 작성하여 솔리드 모델을 구축하고, 열환경 평가의 도구로써 CFD를 적용하여 한옥의 실내 열환경을 평가하고자 하였다. 본 연구에서는 복잡한 형태의 Geometry 작성이 가능한 CATIA와 환경 시물레이션 Code인 FLUENT 등의 상용 Code를 활용함으로써 연구의 신뢰성을 높이고자 하였다. 본 연구는 일차적으로 서울지방에 건축된 한옥의 기준모델을 설정하여 벽, 천정, 바닥, 창호 등 건축요소의 부위별 형태를 고찰하고, Geometry작성의 입력자료로 사용하기 위하여 각 부위별 치수체계를 구축하였다. 건축요소의 부위별 각각의 형태를 솔리드 모델로 구축하기 위하여 단계별로 벽, 천정, 바닥, 창호 등에 관한 건축요소의 Geometry를 모델링하여 CFD 입력자료로 활용하여 열환경 시물레이션을 수행하였다.

Cellular growth and fatty acid content of Arctic chlamydomonadalean

  • Jung, Woongsic;Kim, Eun Jae;Lim, Suyoun;Sim, Hyunji;Han, Se Jong;Kim, Sanghee;Kang, Sung-Ho;Choi, Han-Gu
    • ALGAE
    • /
    • 제31권1호
    • /
    • pp.61-72
    • /
    • 2016
  • Arctic microalgae thrive and support primary production in extremely cold environment. Three Arctic green microalgal strains collected from freshwater near Dasan Station in Ny-Alesund, Svalbard, Arctic, were analyzed to evaluate the optimal growth conditions and contents of fatty acids. The optimal growth temperature for KNF0022, KNF0024, and KNF0032 was between 4 and 8℃. Among the three microalgal strains, KNF0032 showed the maximal cell number of 1.6 × 107 cells mL-1 at 4℃. The contents of fatty acids in microalgae biomass of KNF0022, KNF0024, and KNF0032 cultured for 75 days were 37.34, 73.25, and 144.35 mg g-1 dry cell weight, respectively. The common fatty acid methyl esters (FAMEs) analyzed from Arctic green microalgae consisted of palmitic acid methyl ester (C16:0), 5,8,11-heptadecatrienoic acid methyl ester (C17:3), oleic acid methyl ester (C18:1), linoleic acid methyl ester (C18:2), and α-linolenic acid methyl ester (C18:3). KNF0022 had high levels of heptadecanoic acid methyl ester (26.58%) and heptadecatrienoic acid methyl ester (22.17% of the total FAMEs). In KNF0024 and KNF0032, more than 72.09% of the total FAMEs consisted of mono- and polyunsaturated fatty acids. Oleic acid methyl ester from KNF0032 was detected at a high level of 20.13% of the FAMEs. Arctic freshwater microalgae are able to increase the levels of polyunsaturated fatty acids under a wide range of growth temperatures and can also be used to produce valuable industrial materials.

Effects of Maturing Stage of Corn Hybrids on Silage Yield, Feeding Value for Dairy Cows and Milk Production in a Cold Region of Japan

  • Oshita, Tomoko;Takayama, Hideki;Otsuka, Hiroshi;Igarashi, Hiroaki;Nonaka, Kazuhisa;Kume, Shinichi
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제20권4호
    • /
    • pp.511-516
    • /
    • 2007
  • This experiment was conducted to evaluate the effects of differently maturing corn hybrids on silage production and milk production per unit area in the northern part of Japan, where grain development occurs under decreasing ambient temperature. Both hybrids were harvested at the same time. The stages of maturity for the early-maturing hybrids (EH; 80 d relative maturity) and the mid-maturing hybrids (MH; 93 d relative day) were early dent and late dough stage, respectively. The plant yields for MH were higher than those for EH. The dry matter (DM) content of MH was lower than that for EH, and the effluent loss for MH silage was greater than that for EH silage. Therefore, the DM yields of prepared silage per area were similar for both treatments. Twelve multiparous mid-lactation Holstein cows ($58{\pm}13$ days in milk) were fed diets based on EH or MH silage in a crossover design with two 3-week periods. Cows were fed 3 kg of hay crop silage (DM basis) and either EH or MH silage ad libitum, and concentrates were supplied to meet NRC requirement for dairy cows. Silage DM intake for EH was found to be higher (p<0.05) than that for MH (10.0 vs. 9.1 kg/day). Milk production and milk composition for EH were similar to those for MH. Feed efficiency per total feed intake was similar in both treatments, although the feed efficiency per concentrate intake tended to be higher for the EH than that for the MH diet. These results indicate that differences in maturation in corn hybrids affect the effluent production of silage and the silage intake of dairy cows. It may be advantageous to plant early hybrid corn with a reduction in effluent production of silage as well as a reduction in purchased feed costs for dairy cows under the climatic conditions of the northern part of Japan.

WIM 센서 설치에 적합한 실런트 개발을 위한 기초적인 연구 (Fundamental Study on Development of Sealants used for WIM Sensor Installation)

  • 임치수;김두병;김용주;이강훈;이재준
    • 한국도로학회논문집
    • /
    • 제19권2호
    • /
    • pp.17-24
    • /
    • 2017
  • PURPOSES : This study aims to develop a sealant for use in the installation of Weigh-In-Motion (WIM) sensor for asphalt concrete or cement concrete pavements. METHODS : In order to investigate the properties of various sealants that were mixed with latex and carbon fiber, various test methods were adopted, such as bituminous bond strength test, softening point test, and cone penetration test. To evaluate moisture susceptibility, the BBS test was conducted under moist condition. The bond strength ratio (BSR) was calculated based on tensile strength ratio method. RESULTS : The sealant's properties significantly varied according to the amount of latex or carbon fiber. The usage of latex marginally enhanced the cone penetration test result, notwithstanding reduced asphalt content. This implies that the sealant will be proper cold temperature reason. Moreover, the addition of latex and carbon fiber evidently increased the softening point. This indicates that the tendency of the material to flow at elevated temperatures is encountered during service. With the addition of latex and carbon fiber, the moisture susceptibility measured with BSR improved marginally, while the bond strength under dry condition decreased marginally. Sealant F displays the highest bond strength and BSR under limited test conditions. CONCLUSIONS : According to the proportion of latex and carbon fiber mixed, properties of sealant, such as softening point, cone penetration, and BSR varied marginally. This indicates that the sealant has to be applied considering the environmental condition, to improve service life.

밀가루의 이화학적(理化學的)인 성질(性質) 및 냉동(冷凍)반죽의 안정성(安定性) (Studies on Rheological Properties of Dough and Stability of Frozen Dough)

  • 서석출;송형익;정기택
    • Current Research on Agriculture and Life Sciences
    • /
    • 제5권
    • /
    • pp.75-80
    • /
    • 1987
  • 냉동발효(醱酵)빵 제조에 사용되는 경질(硬質) 밀가루의 이화학적(理化學的) 성질과 straight no-time method로 조제한 반죽의 동결안정성(凍結安定性)을 검토(檢討)하였다. 밀가루는 수분이 14.0%, 회분(灰分)이 0.48% 정도였고 단백질이 13.15%, 건조 gluten이 13.43%였다. Farinograph성적은 반죽의 development time이 5.5분, 흡수율(吸水率) 62%였고, amylograph성적상의 최고점도(最高粘度)는 500BU정도였다. Extensigraph의 특성중(特性中) 신장저항성(伸張抵抗性)은 시간이 경과할수록 증가하였고, 신장성(伸張性)은 감소(減少)하였다. 이상(以上)의 이화학(理化學)이 성질(性質)로 미루어 공시(供試)밀가루는 제(製)빵에 아주 적합하였다. 동결저장기간과 발효시간이 발효력(醱酵力)에 미치는 영향을 고려할 때, 반죽온도를 $20^{\circ}C$로 조정하는 것이 반죽의 냉동장해(冷凍障害)를 억제하고 냉동안정성(冷凍安定性)을 유지하는데 효과적(效果的)이었다.

  • PDF