• 제목/요약/키워드: cold expansion

검색결과 192건 처리시간 0.023초

홀 확장된 판재의 에지마진 변화에 따른 피로특성 연구 (A Study on fatigue Properties with Different Edge Margin for Hole Expansion Plate)

  • 이준현;이동석;이환우
    • 대한기계학회논문집A
    • /
    • 제26권11호
    • /
    • pp.2383-2389
    • /
    • 2002
  • This paper describes an experimental study on fatigue life extension by using cold working process in fastener hole of aircraft structure. Cold working process was applied for A12024-7351 specimens by considering the effect of edge margin on fatigue life. It is generally recognized that cold working process offers a protective zone around fastener hole of aluminum aircraft structure due to the residual compressive stresses which lead to retardation of crack growth. Thus this process provides the beneficial effect of increasing the fatigue life of the component. there by decreasing maintenance costs. It has also been successfully incorporated into damage tolerance and structural integrity programs. Cold working specimens were tested at constant amplitude peak cyclic stresses. Fatigue life of cold working specimen compared with that of specimen fabricated with base material. The increase of fatigue life for cold working specimen is discussed by both considering the effect of residual compressive stresses measured by X-ray diffraction technique and quantitative effect of edge margin.

방동제를 이용한 한중 콘크리트 개발 연구 (Development of cold weather concrete by using do-icing agency)

  • 유성원;서정인
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.953-958
    • /
    • 2001
  • The concrete which has placed under cold weather has some defects such as the decrease of initial strength by hydration delay, strength unrecover at unhardened concrete freezing and structural failure and crack by expansion pressure. So, in this study, we tried to develope the concrete which can be made under cold weather without defect by using of do-icing agency In concrete test, the used do-icing agency has the characteristics of de-icing and rapid hydration. By test results, Co{$NH_{2}$$]_{2}$is unsuitable for workability, and NaN$O_{2}$ is the most suitable agency for cold weather. And for curing, the cured concrete at $21^{\circ}C$ for 24 hours has the safe strength.

  • PDF

한방의료기관에서의 감기 진료에 대한 일반인의 인식 조사 (A Survey in the General Population on the Perception of the Common Cold Treatment at the Korean Medical Clinic)

  • 김도형;조민경;홍미나;최준용
    • 대한한방내과학회지
    • /
    • 제38권3호
    • /
    • pp.336-352
    • /
    • 2017
  • Objective: This study investigated the perception, utilization, and satisfaction (in the general population), of the common cold treatment at the Korean Medical Clinic, to provide basic information for the development of Korean medicine clinical practice guidelines for the common cold. Method: A questionnaire was developed that consisted of questions about the general perception, utilization status, degree of satisfaction, willingness to use, and the improvement of the common cold treatment at the Korean Medical Clinic. An online survey was conducted using this questionnaire. Results: Three-hundred subjects responded to the survey. The results of the analysis were as follows. 1. 73.7% of the subjects recognized the common cold treatment at the Korean Medical Clinic. 2. 72% of the subjects had a positive perception of Korean medicine for common cold treatment. The major reason for the positive perception was the expectation about improving immunity and preventing recurrence. 3. Only 20% of the subjects had visited the Korean Medical Clinic for common cold treatment. The expensive cost was the major reason for not visiting the Korean Medical Clinic for common cold treatment. 4. The ratio of subjects who were willing to visit the Korean Medical Clinic for common cold treatment was 70%. 5. The expansion of health insurance coverage (67.7%), the activation of public relations (54.7%), and the development of a new herb medicine preparation that was easy to take (43.3%) were found to be necessary for improving the Korean medical service for common cold treatment. Conclusion: In spite of high recognition and positive perception, actual utilization of common cold treatment at the Korean Medical Clinic was relatively low. Multifaceted efforts are necessary to enhance the competitiveness of Korean medical service for treatment of the common cold.

압연가공판재의 수소저장과 팽창거동과의 관계 (The Relation between Hydrogen absorption and Expansion behavior in the Rolled Plate)

  • 정영관;김경훈;이근진
    • 한국수소및신에너지학회논문집
    • /
    • 제12권2호
    • /
    • pp.121-128
    • /
    • 2001
  • In order to study the relation between expansion of the specimen and the hydrogen absorption rate, thin palladium plates with cold rolling were used. Thin palladium plates were hydrogenated in the 0.1mol $H_2SO_4$ electrolyte by electrochemical method. The expansion behavior on hydrogen absorbing can be obtained by X-ray diffraction analysis and by micrometer measurement It is noted that the expansion rate of Palladium specimens in thickness direction is larger than in length and width direction. The lattice constants increase quickly with increasing hydrogen absorbing rate up to 0.5, but above the rate they keep constant. Also the clues for plastic deformation, such as slip lines and voids, were observed in abundantly even though the plates were hydrogenated once.

  • PDF

냉매분사식 팽창장치를 적용한 냉동기의 특성에 관한 연구 (A Study on the Characteristics of the Refrigerator Using a Refrigerant Injection Type Expansion Device)

  • 조병옥
    • 설비공학논문집
    • /
    • 제12권10호
    • /
    • pp.925-931
    • /
    • 2000
  • Refrigerating ability of vapor compression refrigerator is decided by the harmonic work of it's components such as compressor, condenser, evaporator, expansion device, and so on. In this study, choosing refrigerant injectors as a new one of expansion device, temperature change of the cold room, ice freezing ability, and power consumption on flowrate of injector and refrigerant charging condition are evaluated experimentally. As the results of this study, it is verified that the spray injection type refrigeration system has some merits according to the flowrate and spray pattern of injector and charging quantum of refrigerant. And there are some design factors such as spray pattern and shape of spray chamber to utilize and fabricate this refrigerant injection type refrigerator.

  • PDF

기상재해와 수도재배상의 대책 (Improvement in Rice Cultural Techniques Against Unfavorable Weather Condition)

  • 류인수;이종훈;권용웅
    • 한국작물학회지
    • /
    • 제27권4호
    • /
    • pp.385-397
    • /
    • 1982
  • The climatic impacts have been the environmental constraints with soil characteristics to achieve self sufficiency of food production in Korea. In this paper, the distribution and appearance of impacts and the changes in climatological status due to recent trend of early transplanting of rice are widely discussed to derive some countermeasures against the impacts, being focussed on cultural A long term analysis of the climatic impact appearances of the last 74 years showed that drought, strong wind, flood, cold spell and frost were the major impacts. Before 1970's, the drought damage was the greatest among the climatic impacts; however, the expansion and improvement of irrigation and drainage system markedly decreased the damage of drought and heavy rain. The appearance of cold damage became more frequent than before due to introduction of early transplanting for more thermophilic new varieties. Tongillines which were from Indica and Japonica crosses throw more attention to cold damage for high yields to secure high temperature in heading and ripening stages and lead weakness to cold and drought damage in early growth stage after transplanting. The plants became subject to heavy rain in ripening stage also. For the countermeasures against cold damage, the rational distribution of adequate varieties according to the regional climatic conditions and planting schedule should be imposed on the cultivation. A detoured water way to increase water temperature might be suggestable in the early growth stage. Heavy application of phosphate to boost rooting and tillering also would be a nutritional control method. In the heading and ripening stages, foliar application of phosphate and additional fertilization of silicate might be considerable way of nutritional control. Since the amount of solar radiation and air temperature in dry years were high, healthy plants for high yield could be obtained; therefere, the expansion of irrigation system and development of subsurface water should be performed as one of the national development projects. To minimize the damage of strong wind and rainfall, the rational distribution of varieties with different growing periods in the area where the damage occurred habitualy should be considered with installation of wind breaks. Not only vertical windbreaks but also a horizontal wind break using a net might be a possible way to decrease the white heads in rice field by dry wind. Finally, to establish the integrated countermeasures against the climatic impacts, the detailed interpretation on the regional climatic conditions should be conducted to understand distribution and frequency of the impacts. The expansion of observation net work for agricultural meteorology and development of analysis techniques for meteorological data must be conducted in future together with the development of the new cultural techniques.

  • PDF

광폭 노즐을 사용한 저온분사 공정시 분사 기판면에서의 입자속도분포 예측

  • 박혜영;박종인;정훈제;한정환;김형준
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2010년도 춘계학술발표대회
    • /
    • pp.55.2-55.2
    • /
    • 2010
  • 기존의 thermal spray coating은 분사시 가스와 입자가 높은 열을 동반하여 상대적으로 차가운 기판과의 충돌되는 과정에서 기판과 입자 사이에 열응력이 발생하게 되고, 이것은 코팅 특성을 저하시킨다. 또한 고온의 가연성 가스등의 사용으로 작업 시 안전문제 등의 단점이 있었다. 이러한 단점을 보완하기 위하여 분사 시 운동에너지를 주로 이용하는 cold spray coating 공정이 개발되었다. 이 공정은 코팅 입자를 임계속도 이상으로 가속시켜 입자와 기판이 충돌시 소성 변형을 통해 적층되는 코팅기술이다. Cold spray coating공정은 상온 코팅이 가능하기 때문에 주입입자의 물성이 비교적 그대로 유지되고, 고온의 열로 인한 기판의 변질을 막을 수 있다. Cold Spray coating에서 주로 원형 노즐을 사용하나 본 연구에서는 분사 효율 향상을 위한 광폭노즐을 사용하여 코팅 시간 단축을 기대하고 있다. 임계속도 이상의 입자 확보를 위하여 노즐의 expansion ratio와 노즐 shape의 변화를 주어 그에 따른 노즐내의 유동장을 수치해석을 통해 계산하였다. 분사되는 출구면과 기판 사이의 입자 속도 분포를 해석하였고, 이를 통해 임계속도 이상의 속도를 갖는 유효 입자들의 분포 및 유효 분사 면적을 예측하였다. 또한, 기존의 원형 노즐과 광폭 노즐과의 유동장 비교 및 각 노즐 분사면을 분석하여 cold spray coating공정에서의 효율적인 노즐 형상을 디자인하였다.

  • PDF

신차단방식 SF$_{6}$ 가스 차단기의 소전류 차단성능 연구 (Investigation of Small Current Interruption Performance for New Type of Interrupting Chamber in SF$_{6}$ Gas Circuit Breaker)

  • 송원표;권기영;이재성;송기동;김맹헌;고희석
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제54권11호
    • /
    • pp.519-526
    • /
    • 2005
  • This paper presents computer simulation results for developing new type of SF$_{6}$ Circuit Breaker in terms of cold gas flow after small current interruption. This cold gas flows down a nozzle into the chamber of a circuit breaker. There are many difficult problems in analyzing the gas flow due to complex geometry, moving boundary, shock wave and so on. When predicting the dielectric capability of a gas circuit breaker after interruption, the gas pressure and density distributions due to the cold gas must be considered in addition to the electrical field imposed across the gas. A self-coded computational fluid dynamics (CFD) program is used for the simulation of cold gas flow in order to evaluate the electrical field characteristic across open contacts and transient characteristics of insulations after small current interruption.

GM형 맥동관 냉동기의 저온부 경사도에 따른 냉각 성능 특성 연구 (Orientation dependence of GM-type pulse tube refrigerator)

  • 고준석;김효봉;박성제;홍용주;염한길;이청수;강인수;고득용
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제14권3호
    • /
    • pp.48-52
    • /
    • 2012
  • This paper describes experimental study on the orientation dependence of GM-type pulse tube refrigerator with helium and neon as working gas. A pulse tube refrigerator generates refrigeration work with gas expansion by gas displacer in the pulse tube. The pulse tube is only filled with working gas and there exists secondary flow due to large temperature difference between cold-end and warm-end. The stability of secondary flow is affected by orientation of cold-head and thus cooling performance is deteriorated by gas mixing due to secondary flow. In this study, a single stage GM-type pulse tube with orifice valve as a phase control device is fabricated and tested. The fabricated pulse tube refrigerator is tested with two different working gases of helium and neon. First, optimal valve opening and operating frequency are determined with experimental results of no-load test. And then, the variation of no-load temperature as orientation angle of cold-head is measured for two different working gases. Effect of orientation dependence of cold-head as working gas is discussed with experimental results.

지정학의 부활과 동아시아 해양안보 (Return of Geopolitics and the East Asian Maritime Security)

  • 이춘근
    • Strategy21
    • /
    • 통권36호
    • /
    • pp.5-32
    • /
    • 2015
  • Geopolitics or Political Geography is an essential academic field that should be studied carefully for a more comprehensive analysis of international security relations. However, because of its tarnished image as an ideology that supported the NAZI German expansion and aggression, geopolitics has not been regarded as a pure academic field and was rejected and expelled from the academic communities starting from the Cold War years in 1945. During the Cold War, ideology, rather than geography, was considered more important in conducting and analyzing international relations. However, after the end of the Cold War and with the beginning of a new era in which territorial and religious confrontations are taking place among nations - including sub national tribal political organizations such as the Al Quaeda and other terrorist organizations - geopolitical analysis again is in vogue among the scholars and analysts on international security affairs. Most of the conflicts in international relations that is occurring now in the post-Cold War years can be explained more effectively with geopolitical concepts. The post - Cold War international relations among East Asian countries are especially better explained with geopolitical concepts. Unlike Europe, where peaceful development took place after the Cold War, China, Japan, Korea, the United States, Taiwan and Vietnam are feeling more insecure in the post-Cold War years. Most of the East Asian nations' economies have burgeoned during the Cold War years under the protection of the international security structure provided by the two superpowers. However, after the Cold War years, the international security structure has not been stable in East Asia and thus most of the East Asian nations began to build up stronger military forces of their own. Because most of the East Asian nations' national security and economy depend on the oceans, these nations desire to obtain more powerful navies and try to occupy islands, islets, or even rocks that may seem like a strategic asset for their economy and security. In this regard, the western Pacific Ocean is becoming a place of confrontation among the East Asian nations. As Robert Kaplan, an eminent international analyst, mentioned, East Asia is a Seascape while Europe is a Landscape. The possibility of international conflict on the waters of East Asia is higher than in any other period in East Asia's international history.