• 펄프종이기술
• /
• 제36권2호
• /
• pp.60-69
• /
• 2004

Application methods of chemicals were investigated to minimize strength reduction of corrugated boards under the high humidity environment encountered in the cold chain system. Starch insolubilizers were introduced in the starch solution preparation of the Stein hall method and their insolubilization effect of starch binder were estimated. The performance of water repellent agents(WRA) and moisture proof agents(MPA) were evaluated in terms of water and moisture resistance. And effects of the combination of the chemicals and the coating method were also examined. Addition of the polyamine polyamide insolubilizer to the main part in the Stein hall process improved the binding force and water resistance of starch, which contributed to minimize the strength reduction of paper under the high humidity environment. AZC and Glyoxal type insolubilizers could not be used in the experiment due to an excessively increased viscosity of starch solution and the poor stability. Conventional WRA treatment to the base paper enhanced water and moisture resistance very slightly even though water repellency of the paper reached R10 by the treatment. MPA showed excellent performance than WRA not only in water and moisture resistance but in water repellency. Double coating on paper with MPA was more effective than the single coating at the same coating weight. A newly developed MPA showed excellent performance and runnability only by a single coating instead of a double coating.

• 펄프종이기술
• /
• 제34권1호
• /
• pp.46-53
• /
• 2002

This study was carried out to analyze the effects of preservation temperature and relative humidity to the physical properties of corrugated fiberboard boxes for fruit and vegetable packaging. The preservation temperature did not affect severely to physical properties of corrugated fiber-board. Relative humidity was a major cause of corrugated fiberboard box quality deterioration. The burst and compressive strengths of experimental boxes measured with Mullen high pressure tester and tong crush tester were decreased gradually as relative humidity increased from 55% to 75%. But, the strength properties slightly decreased relative humidity at 75% or higher. This tendency was the greater for single wall (SW) corrugated fiberboard box than that for double wall (DW). It is suggested that development of the water-resistant corrugated fiberboard and box be needed that can be used under the condition of low temperature and high moisture content, which are being employed in the cold chain system.

• 기술사
• /
• 제12권3호
• /
• pp.18-22
• /
• 1979

"In summary, the freezing facilitty manufacturing industry has a bright prospects for further development. So followings are recommended: 1) The import restriction policy should be continued to expand the demand for the 10callT manufactured facilities, 2) Training of local people and import of advanced technologies should be encouraged 3) The capacities of the local manufacturing industry should be expanded to meet the: increasing demand for the facilities, 4) Further incentives should be affered to the freezing & cold storage sector for the repla¬cement of the worm-out facilities 5) The marketing channel of marine products should be reorganized into ""cold-chain system"" by providing a legislative supports."

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권3호
• /
• pp.249-257
• /
• 2022

In recent years, if we order food by easily accessing the online market with our smartphone, we can receive the product in a fresh state at dawn the next day. Cold chain is an industry that can create high added value because it has both the characteristics of general logistics and sensitivity to temperature. Based on the electrical specifications derived from the reefer container capacity requirement investigation, we proved that power supply to up to 33 reefer containers can be made by using three additional auxiliary power supplies which are applied for freight trains in Korea. In this paper, we conducted a research on a design of power supply system for freight train reefer container based on simulation as a basic research necessary for low-temperature distribution and cold chain construction based on the reefer container railroad. Consequently, the simulation was conducted using the three-phase inverter diagram in PSIM and the SVPWM (3-harmonic injection method) control technique, and it was verified that the required power voltage was satisfied with 622V_dc, which is lower than the input voltage of general SPWM of 718V_dc. The details of this paper could be used as a foundational study for constructing cold chains based on a reefer container dedicated to freight trains in the future.

• 한국정보통신학회논문지
• /
• 제14권6호
• /
• pp.1453-1459
• /
• 2010

최근 들어 단순 보관의 기능만을 가지고 있던 기존의 냉동창고가 보관뿐만 아니라, 규격화된 유통 시스템을 갖추어 전체 물류 공급망 관리의 효율성과 경쟁력을 갖추고자 한다. 이를 위해 라디오 주파수를 이용하여 움직이는 물체를 인식, 추적, 분류할 수 있는 기술인 RFID (Radio Frequency Identification)를 적용할 수 있다. 본 논문에서는 RFID 기술을 적용하여 최적화된 비즈니스 프로세스를 지원하는 냉동창고 관리 시스템을 개발하고자 한다. 이를 위해 냉동창고 업무 프로세스를 분석하고 RFID 기술 도입에 따른 의사결정이 필요한 설계요소들을 식별한다. 식별된 설계요소들은 RFID 배치 시뮬레이터를 이용하여 RFID 데이터가 비즈니스 프로세스에 통합되는 과정에 대하여 그 효율성을 판단할 수 있게 한다.

• Fisheries and Aquatic Sciences
• /
• 제26권10호
• /
• pp.593-604
• /
• 2023

Post-harvest handling and hygienic level of aquatic products significantly affect the quality and level of safety. Cold chain control is one of the determining factors for the quality of fish and the bacterial community that grows on the fish. Identification of spoilage bacteria and pathogens in aquatic products must be made because it will determine the physical and chemical quality. A molecular identification method with high sensitivity is the solution. This study aims to identify the quality of fish and bacterial communities that grow. The research procedures included sample collection, pH measurement, drip loss measurement, transportation and cold storage treatment, DNA extraction, DNA sequencing, sequence analysis, and bioinformatics analysis. The conclusion obtained from this study is that the simulation of the cold chain system applied to eastern little tuna does not significantly affect changes in the water activity value, pH, and drip loss. The insignificant change indicates that the eastern little tuna samples are still in good quality. The bioinformatics analysis showed the highest diversity and abundance of the bacterial community came from the Gammaproteobacterial class.

• 대한산업공학회지
• /
• 제39권4호
• /
• pp.290-297
• /
• 2013

The increasing level of operation in high-tech industry is likely to require ever more complex structure in reliability problem. Furthermore, system failures are more significant on society as a whole than ever before. Reliability redundancy optimization problem (RROP) plays a important role in the designing and analyzing the complex system. RROP involves selection of components with multiple choices and redundancy levels for maximizing system reliability with constraints such as cost, weight, etc. Meanwhile, previous works on RROP dealt with system with perfect failure detection, which gave at most a good solution. However, we studied RROP with imperfect failure detection and switching. Using absorbing Markov Chain, we present not a good solution but the optimal one. In this study, the optimal system configuration is designed with warm and cold-standby redundancy for k-out-of-n system in terms of MTTF that is one of the performance measures of reliability.

• 펄프종이기술
• /
• 제35권2호
• /
• pp.33-38
• /
• 2003

In order to design the high strength corrugated fiberboard containers for agricultural products that can be used for the cold chain system, a large number of individual boxes were placed in various humidity environments at two different temperature of 5 and $20^{\circ}C$. The results indicated that temperature changes do not effect on physical strength of corrugated fiberboard containers as much as humidity changes did. The main conclusion from this study was that compression strength of corrugated fiberboard containers dropped significantly at high humidity condition, but the rates varied depending on the number of walls, temperature, and perimeter of containers. The packaging designer must consider the corrugated fiberboard boxes are also greatly affected by dimensional variations such as the length versus width ratio. Based on this study, water-resistant board would not be necessary if the ambient relative humidity does not reach to a critical point, 85 percent in the cold chain system. However, the designer must count for the unexpected fluctuation of rotative humidity resulting in severe loss of the compression strength of corrugated fiberboard container.

• 한국수산과학회지
• /
• 제55권5호
• /
• pp.670-680
• /
• 2022

Owing to the lack of a cold-chain distribution system, most seafood is generally distributed under room temperature conditions. However the degradation of freshness during the distribution process can lead to disputes between sellers and consumers. The most widely used method for low-temperature distribution for seafood includes packaging it with styrofoam boxes and cold packs. In this study, vacuum-packed frozen fillets of four fish species of [white meat (Paralichthys olivaceus and Sebastes schlegelii) and red meat (Scomber japonicus and Scomberomorus niphonius)] were placed in styrofoam boxes with cold packs. Thereafter, changes in chemical (including pH, volatile basic nitrogen, and trimethylamine), physical (odor intensity, hardness, and chewiness), and microbial (viable cell count) characteristics of the fillets were measured during storage at 25℃. To identify the suitable method of determining freshness during the room-temperature distribution, several factors were considered, which included significant difference verification, correlation coefficients, and economic efficiency (experimental cost and time). Volatile basic nitrogen, pH, odor intensity, and viable cell count are the most rapid and accurate freshness indicators for determining freshness of frozen fish fillets during.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권4호
• /
• pp.103-111
• /
• 2021

In modern society, digital lifestyles are spreading to minimize contact with people and to receive contactless information. The spread trend has established an unmanned distribution system in which transactions through contactless technologies such as kiosks and chatbots are activated in face-to-face transactions with sellers and consumers. In order to streamline logistics supply worldwide, digital new deal based joint logistics hubs, unmanned courier storage platforms, and fresh logistics based last mile services have been developed into unmanned logistics systems, focusing on the intelligent logistics system automation process. Unmanned courier storage system installed in urban areas and home to daily logistics where volume is concentrated are provided with fresh logistics services through cold chain and receiving freights in contactless environments. Development is also underway to minimize safety accidents caused by courier services, such as managing various information based on the integrated control system. This paper defines the concept of integrated operation for the development of a platform for contactless unmanned courier storage device developed into next-generation logistics system. In addition, we intend to develop systems engineering-based output for deriving safety requirements and specifications by identifying risk sources that may occur in the operational scenario. Therefore, the goal is to establish a foundation for safety and reliability between interfaces of logistics systems to be installed in apartment and subway station environments that want to provide unmanned logistics services to various consumers.