• 한국지구과학회지
• /
• 제28권5호
• /
• pp.598-602
• /
• 2007

A long-term in situ observation was carried out in the Ice-valley at Milyang in order to explain the factors and processes associated with the summertime ice formation. The variation of temperature inside Ice-valley in relation with ice formation in summer time was found to depend on precipitation rate in spring and cold air sinking in autumn and winter. The rate of temperature rising tends to correspond to sensible heat release depending on the precipitation amount at the freezing location. The reason of the cold air accumulation in a talus in the Ice-valley is the cold air sinking over the surface of talus due to the occurrence of outside clod air mass and the accumulated cold air from autumn to spring flow outside at the bottom of talus. The out-flowing cold air can result in the ice formation in the hot summer.

• 한국농림기상학회지
• /
• 제6권3호
• /
• pp.164-169
• /
• 2004

A spatial interpolation scheme incorporating local geographic potential for cold air accumulation (TOPSIM) was used to test the feasibility of operational frost warning in Chatancheon basin in Yeoncheon County, where the introduction of new crops including temperate zone fruits is planned. Air temperature from April to June 2003 was measured at one-minute intervals at four locations within the basin. Cold-air accumulation potentials (CAP) at 4 sites were calculated for 3 different catchment scales: a rectangular area of 65 x 55 km which covers the whole county, the KOWACO (Korea Water Corporation) hydrologic unit which includes all 4 sites, and the sub-basins delineated by a stream network analysis of the digital elevation model. Daily minimum temperatures at 4 sites were calculated by interpolating the perfect prognosis (i.e., synoptic observations at KMA Dongducheon station) based on TOPSIM with 3 different CAPs. Mean error, mean absolute error, and root mean square error were calculated for 45 days with no precipitation to test the model performance. For the 3 flat locations, little difference was detected in model performance among 3 catchment areas, but the best performance was found with the CAPs calculated for sub-basins at one site (Oksan) on complex terrain. When TOPSIM loaded with sub-basin CAPs was applied to Oksan to predict frost events during the fruit flowering period in 2004, the goodness of fit was sufficient for making an operational frost warning system for mountainous areas.

• Wind and Structures
• /
• 제32권5호
• /
• pp.453-469
• /
• 2021

Snow accumulation on the road frequently induces a big traffic problem in the cold snowy region. Accurate prediction on snow distribution is fundamental for solving drifting snow disasters on roads. The present study adopts the transient method to simulate the wind-induced snow distribution on embankment based on the mixture multiphase model and dynamic mesh technique. The simulation and field measurement are compared to confirm the applicability of the simulation. Furthermore, the process of snow accumulation is revealed. The effects of friction velocity and snow concentration on snow accumulation are analyzed to clarify its mechanism. The results show that the simulation agrees well with the field measurement in trends. Moreover, the snow accumulation on the embankment can be approximately divided into three stages with time, the snow firstly deposited on the windward side, then, accumulation occurs on the leeward side which induced by the wake vortex, finally, the snow distribution reaches an equilibrium state with the slope of approximately 7°. The friction velocity and duration have a significant influence on the snow accumulation, and the vortex scale directly affected the snow deposition range on the embankment leeward side.

• Ocean and Polar Research
• /
• 제24권3호
• /
• pp.227-236
• /
• 2002

For ten firn cores, from both the eastern and the western side of Lambert Glacier basin (LGB), snow accumulation rate and isotopic temperature were measured far the recent 50 years. Results show that snow accumulation for five cores over the eastern side of LGB (GC30, GD03, GD15, DT001, and DT085) at Wilks Land and Princess Elizabeth Land increases, whereas it decreases at the western side (Core E, DML05, W200, LGB 16, and MGA) at Dronning Maud Land, Mizuho Plateau and Kamp Land. For the past decades, the increasing rate was $0.34-2.36kg\;m^{-2}a^{-1}$ at the eastern side and the decreasing rate was $-0.01\;-\;-2.36kg\;m^{-2}\;a^{-1}$ at the western side. Temperatures at the eastern LGB were also increased with the rate of $0.02%o\;a^{-l}$. At the western LGB it was difficult to see clear trends, which were confirmed by Instrumental temperature records at coastal stations. Although statistic analysis and modeling results display that both surface temperature and accumulation rate has increased trends in Antarctic ice sheet during 1950-2000, the regional distributions were much more different for different geographic areas. We believe that ice-core records at Wilks Land and Princess Elizabeth Land reflect the real variations of SST and moisture change in the southern India Ocean. For the Kamp Land and Dronning Maud Land, however circulation pattern was different, by which the climate was more complicated. The International Trans-Antarctic Scientific Expedition (ITASE) aimed to reveal an overall spatial pattern of climate change over Antarctic ice sheet for the past 200 years. This study points the importance of continental to regional circulation to annual-decadal scale climate change in Antarctica.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 단조 심포지엄
• /
• pp.141-146
• /
• 1999

In the stage of process design, many factors affecting tool life should be considered. Wear, Damage Accumulation and excessive die Stress are those. Most Engineer think wear and damage accumulation affection deeply to the cold forging dies and wear for the hot forging dies. In this report, the example that wear and stress distribution affect tool life in hot forging together will be introduced and the way to solve that problem using Finite Element Method.

• 한국작물학회지
• /
• 제44권2호
• /
• pp.176-179
• /
• 1999

Trinexapac-ethyl[ 4-(cyclopropyl- $\alpha$ -hydroxy-methylene)-3,5-dioxocyclohexane carboxylic acid ethylester] is a growth-retardant for plants by inhibiting a key step in biosynthesis of GA. A treatment of trinexapacethyl generally induces a reduction in vegetative growth and also inhibits heading. In addition, the trinexapacethyl was known to enhance the freeze-tolerance in annual bluegrass, however, the mechanism is not known yet. One possible reason for the enhanced freeze-tolerance may be the antifreeze protein known to be accumulated in intercellular space of the leaf during cold acclimation. In order to see the possible in-duction of the synthesis of antifreeze proteins by trinexacpacethyl, the apoplastic proteins extracted from Kentucky bluegrass treated with trinexapacethyl were analyzed by SDS-PAGE and the presence of the antifreeze protein was observed. In addition, western analysis showed the identity of the protein induced by both a cold acclimation and a trinexapacethyl treatment. It appears that an enhanced freeze-tolerance of the turf grass by trinexapacethyl is due to the synthesis and/or accumulation of the antifreeze protein similar to the enhanced freeze tolerance induced by cold acclimation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.326-329
• /
• 2005

Since the required strength of forged part is achieved by work hardening with the accumulation of plastic strain during the cold working, severe load can be exerted on die system. So, dies are liable to the early fracture for the non-heat treated steel forging in comparison with the conventional mild steels. Therefore, it is necessary to lower the flow stress of steels as much as possible during forging steps. Bauschinger effect can be utilized to lower flow stress during forging steps by giving the tensile prestrain on the forging billet during wire drawing step. In the present study, the prestrain effect on Bauschinger phenomenon is studied to avoid difficulties with application of non-heat treated cold forging steels in practice.

• 대한한의학원전학회지
• /
• 제32권4호
• /
• pp.109-118
• /
• 2019

Objectives : In this study, the relationship between Tingling disease(痺證) and Accumulation (積) was examined focusing on the occurrence of Tingling disease and its development into tangible lesion. Methods : Based on related contents in the "Huangdineijing", the process of creation and development of Tingling and its transformation to Accumulation was mainly examined. Results : While Tingling disease is usually caused by the three Qis of Wind-Cold-Dampness, due to its Yin nature there is high tendency of Qi and blood to be blocked and Blood and Fluid-Humor agglomerating into Accumulation. Symptoms of dysaesthesia are merely expressions manifesting in this process. Development into colic accumulation [疝瘕], Gu(蠱), or convulsion[瘛] after Tingling has traveled to the five zang is also related to its transformation into Accumulation. In the case of Tingling disease of the five zang in the "Huangdineijing", it is not a diagnostic category for treatment but actual lesions in the five zang six fu. In other words, in the beginning stages of Tingling disease, some sort of solidification that causes abnormal senses among other symptoms happens, and this solidification starts taking up space within the flesh. If it is not eliminated and persists, it enters into the inner organs and develops Tingling disease of the zangfu. Conclusions : Understanding Tingling disease(痺證) as a presymptom to developing Accumulation, rather than abnormality of sense will enable people to have higher chances in treating tumor.

• 한국조경학회지
• /
• 제29권6호
• /
• pp.27-36
• /
• 2002

The objective of this study is to improve the quality of the atmospheric environment by incorporating the factors of meteorology and urban climate into the field of urban and environmental planning. To this end, we have conducted a study on CLIMATOP and the mapping of urban climate, which are basic data used to analyze changes in climatic factors and the stagnation and accumulation of air pollutants. In particular, we focused on understanding the formation and movement of cold fresh air and its influx into urban areas by measuring and analyzing climatic factors. As a study result, classification criteria far CLIMATOP and a urban climatic map were made. In addition, we analyzed a digital elevation model, climatic data, and isothermal curves. As a result, we identified the corridor through which cold fresh air moves. We also observed that the temperature of the fluxed cold fresh air increased as land use changed. When the results of this study are applied to urban re-development and re-building projects, which require preliminary environmental assessment and environmental impact assessment, the practice proposed by this study is expected to contribute to the natural purification of air pollution activating the movement of cold fresh air and its influx into urban areas.

• 대한한의진단학회지
• /
• 제17권3호
• /
• pp.203-214
• /
• 2013

Objectives Yusanghan(類傷寒) means disease which chills and fever manifest like Cold damage(傷寒) but not Cold damage. However, study on Yussanghan is insignificant. The purpose of this study is to examine the origin and development process of Yusanghan. Methods: 1. Terms and disease related with Yusanghan was collected from books covering Cold damage of all time and analyzed. 2. The transition history was researched by analyzing collected terms. 3. Total appearance frequency of all time by collected disease was researched. Results: Yusanghan was appeared in Hwalinseo(活人書), which Ju Geong(朱肱) of the Song Dynasty wrote, for the first time and the definition and type were established. For the types of those, there are four diseases such as Phlegm-Fluid Retention(痰飮), Food Accumulation(食積), Vexation of Deficiency Type(虛煩), Beriberi(脚氣). Since then, the theory about Yusanghan had developed and the number of types had also increased until the Myung Dynasty. Conclusions: In early days, External Contraction Diseases(外感病) was not included in Yusanghan, but since the late Myung Dynasty, there were a lot of doctors who included External Contraction Diseases in Yusanghan, not in Cold damage. There are Summerheat Stroke, Wind-Dampness(風濕), and Warm Disease(溫病) etc. for included External Contraction Diseases. Because of this, the number of types of Yusanhan had significantly increased.