• 접착 및 계면
• /
• 제4권3호
• /
• pp.9-13
• /
• 2003

본 연구에서는 점착제의 유지력 개선과 pH 조절을 위해 각각 첨가해 주는 가교제와 pH 조절제의 종류 및 첨가량이 수용성 아크릴 점착제의 점착 물성 및 수용성에 미치는 효과를 알아보기 위하여 중합된 점착 시료에 여러 가지의 가교제와 pH 조절를 첨가해 준 후 초기점착력, 유지력 및 점착력 등의 점착 물성과 수용성을 측정하였다. 가교제를 0.2 wt% 미만 첨가해 주었을 때, 초기 점착력은 감소하였고 유지력과 점착력은 증가하였다. 그러나 0.2 wt% 이상 첨가해 주었을 때는 초기 점착력은 증가하였지만 유지력과 점착력은 감소하는 결과를 보였다. 또한 pH 조절제를 첨가해 주었을 때 pH 조절제의 농도가 증가함에 따라 초기점착력과 수용성은 감소하였고 점착력과 유지력은 증가하였으며, LiOH, KOH, NaOH 순으로 점착 물성과 수용성에 미치는 영향이 큰 것으로 나타났다.

• 폴리머
• /
• 제39권2호
• /
• pp.281-286
• /
• 2015

UV경화형 2-ethylhexyl acrylate(2-EHA)/acrylic acid(AA) 점착제의 점착특성에 대한 경화제 함량의 영향에 대해 조사하였다. 0.01 wt%의 극소량의 MMT가 도입된 아크릴 단량체 혼합물에 각각 0, 0.05, 0.1, 0.3 wt%의 1,6-hexanediol diacrylate(HDDA)를 경화제로 첨가하고 UV조사를 실시하여 점착제를 제조하였다. MMT 도입이 공중합체의 경화 거동과 점착제의 표면 특성에 미치는 영향은 매우 낮았으나, 점착특성의 경우 MMT의 도입으로 분자 사슬의 유연성이 제한되면서 응집파괴(cohesive failure)가 억제되는 것을 확인하였다. 그러나 0.3 wt%의 경화제가 도입된 점착제는 사슬 경직성이 크게 증가하면서 MMT의 첨가가 오히려 점착특성을 저하시키는 것으로 추측되었다. 결과를 토대로 2-EHA/AA 점착제의 경우 0.05 wt%의 낮은 함량의 경화제와 극소량의 MMT의 도입이 박리 시 응집파괴 없이 균형적인 점착특성을 부여하는 것으로 판단된다.

• Restorative Dentistry and Endodontics
• /
• 제12권1호
• /
• pp.95-105
• /
• 1986

For the purpose of obtaining a basic data in selecting a suitable material with clinical care, this study was designed to measure the shear stress and to examine the fracture pattern of various dentin bonding restorative materials using 43 extracted bicuspids. The following results were obtained. 1. In dentin, Silux/Scotchbond group showed the highest value ($34.5{\pm}14.7kg/cm^2$) and Fuji Ionomer Type II group and Heliosit/Dentin-Adhesit group showed almost same bond strength in the next place. Durafill/Dentin-Adhesive group showed an infinitesimal value. ($3.1{\pm}1.4kg/cm^2$) 2. Every group showed no difference in bond strength between upper and lower teeth. Between buccal and lingual surfaces. Fuji Ionomer Type II and Durafill/Dentin-Adhesive groups showed too. But, in Silux/Scotchbond and Heliosit/Dentin-Adhesit groups, it was shown that the bond strength in lingual was stronger than in buccal. 3. There was resin fracture with cohesive fracture of bonding agent in Enamel group. In dentin, adhesive-cohesive fracture and adhesive fracture were shown. 4. The stronger bond strength was, the more frequently cohesive fracture occurred. Dentin-Adhesit group showed specific shining appearance as if varnish became hard.

• Computers and Concrete
• /
• 제17권2호
• /
• pp.255-269
• /
• 2016

The waste glass sludge is a waste produced in the glass industry. It is in a dust form and disposed with water. In the disposal process, various cohesive agents are incorporated in order to precipitate the glass particles efficiently. In this paper, we investigate the pozzolanic reaction of the waste glass sludge incorporating precipitation additives experimentally. The consumption of calcium hydroxide, the setting time and the compressive strength and the pore structure were tested for two different types of the waste glass sludge depending on whether precipitation additives were used. It was found that the waste glass sludge incorporating the precipitation additives had a higher pozzolanic potential than the reference waste glass sludge without precipitation additives.

• The Journal of Advanced Prosthodontics
• /
• 제7권2호
• /
• pp.108-114
• /
• 2015

PURPOSE. The aim of this study was to evaluate effect of different surface treatment methods on the bond strength between aged composite-resin core and luting agent. MATERIALS AND METHODS. Seventy-five resin composites and also seventy-five zirconia ceramic discs were prepared. 60 composite samples were exposed to thermal aging (10,000 cycles, 5 to $55^{\circ}C$) and different surface treatment. All specimens were separated into 5 groups (n=15): 1) Intact specimens 2) Thermal aging-air polishing 3) Thermal aging- Er:YAG laser irradiation 4) Thermal aging- acid etching 5) Thermal-aging. All specimens were bonded to the zirconia discs with resin cement and fixed to universal testing machine and bond strength testing loaded to failure with a crosshead speed of 0.5 mm/min. The fractured surface was classified as adhesive failure, cohesive failure and adhesive-cohesive failure. The bond strength data was statistically compared by the Kruskal-Wallis method complemented by the Bonferroni correction Mann-Whitney U test. The probability level for statistical significance was set at ${\alpha}$=.05. RESULTS. Thermal aging and different surface treatment methods have significant effect on the bond strength between composite-resin cores and luting-agent (P<.05). The mean baseline bond strength values ranged between $7.07{\pm}2.11$ and $26.05{\pm}6.53$ N. The highest bond strength of $26.05{\pm}6.53$ N was obtained with Group 3. Group 5 showed the lowest value of bond strength. CONCLUSION. Appropriate surface treatment method should be applied to aged composite resin cores or aged-composites restorations should be replaced for the optimal bond strength and the clinical success.

• Restorative Dentistry and Endodontics
• /
• 제29권2호
• /
• pp.170-176
• /
• 2004

목적 : 본 연구에서는 '전단접착강도 시험법에서 cohesive failure를 줄일 수 있는 것으로 소개된 metal iris를 사용하면, 실제의 1급 와동에서보다 복합 레진과 와동벽의 결합이 없어서 C-factol 적게 작용하고 계면에 발생하는 수축 응력이 감소됨으로써, 임상에서보다 높은 결합력 값이 보고될 것이다.'라는 가설을 검증하기 위하여 dentin ilia를 사용하여 전단접착강도를 측정하였다. 방법 : 64개의 대구치를 4군으로 구분하여 metal iris와 dentin iris군으로 구분하고, 그 각각을 ONE-STEP과 ALL-BOND 2의 두 군으로 나누었다. bonding agent를 적용하고. iris를 고정한 후, 복합 레진을 충전하여 시편을 완성하였다. 이 때 dentin iris의 경우 내면에도 bonding agent를 적용하여 와동벽과의 결합이 발생하게 하였다. 전단접착강도는 24시간 후 측정하였고, 파절의 양상은 주사전자현미경과 입체광학현미경을 이용하여 결정하였다. 결과 : 전단접착강도 측정법에서 iris 법을 이용함으로써 cohesive failure를 줄일 수 있다. 전단접착강도 측정법은 adhesive 두께가 얇은 경우에 와동벽의 영향을 받는다.

• 청정기술
• /
• 제10권1호
• /
• pp.1-7
• /
• 2004

본 연구는 알루미늄 식각액(PWF100)이 응집제로서의 성능을 가지고 있는가를 평가하고 시중에서 판매되고 있는 응집제(PAC17)와의 물성을 비교하였다. PWF100을 이용하여 제조된 BKN-100, BKR-110, 그리고 BKR-120의 농도에 따른 침전층의 높이를 측정하였는데 농도가 낮은 범위에서는 첨가제의 농도가 증가할수록 침전층의 높이가 감소하지만 일정농도 이상에서는 침전층의 높이가 일정해졌다. BKN-100의 농도에 따른 침전층의 밀도를 조사하였는데 BKN-100의 농도가 증가에 따라 침전층의 밀도가 감소하는 경향이 있었다. BKN-100, BKR-110, 그리고 BKR-120 응집제의 첨가량에 따른 침강속도의 변화를 조사하였는데, 첨가량이 증가함에 따라서 침강속도가 빨라지지만 일정한 농도 이상에서는 침강속도가 둔화되었다. BKN-100, BKR-110, 그리고 BKR-120의 농도에 따른 침전층 형성시간의 변화를 측정하였는데, 저농도 영역에서는 농도가 증가함에 따라 침전층 형성시간이 감소하지만 일정농도 이상에서는 침전층 형성시간이 증가하였다. 위의 실험결과로부터 PWF100은 응집제로서의 효과가 있는 것으로 판정되었다.

• Restorative Dentistry and Endodontics
• /
• 제27권6호
• /
• pp.569-576
• /
• 2002

This study was peformed to evaluate the interfacial shear bond strength of base (direct and indirect) and repair composites with aging and surface treatment methods. Direct composite resin specimens ($Charisma^{\circledR}$, Heraeus Kulzer, Germany) were aged for 5 min, 1 hour, 24 hours, and 1 week in $37^{\circ}C$ distilled water before surface treatment, and then divided into five groups Group 1, grinding; Group 2, grinding and application of bonding agent, Group 3, grinding, etching with 37% phosphoric acid for 30sec, and application of bonding agent, Group 4, grinding, etching with 37% phosphoric acid for 30sec, silane treatment, and application of bonding agent ; Group 5, grinding, etching with 4% hydrofluoric acid for 30sec. silane treatment, and application of bonding agent. Indirect composite resin specimens ($Artglass^{\circledR}$, Heraeus Kulzer, Germany) were aged for 1 week in $37^{\circ}C$ distilled water and divided into seven groups Group 1 - Group 5, equal to Charisma specimens; Group 6, grinding, etching with 37% phosphoric acid for 60sec, silane treatment, and application of bonding agent; Group7, grinding, etching with 4% hydrofluoric acid for 60 sec, silane treatment, and application of bond-ing agent. The repair material($Charisma^{\circledR}$) was then added on the center of the surface (5 mm in diameter. 5 mm in height). The shear bond strength was tested and the data was analyzed using one-way ANOVA and the Student- Newman-Keuls test. The following conclusions were drawn. 1 The shear bond strength of $Charisma^{\circledR}$ specimens aged for 1 hour was significantly higher in Group 2 and Group 5 than in Group 1 (p<0.05), and that of $Charisma^{\circledR}$ specimens aged for 1 week was signifi-cantly higher in Group 3 and Group 5 than in Group 1 (p<0.05). No significant difference was found in the bond strength of specimens aged for 5 min and 24 hours. 2. In Group 2 of the $Charisma^{\circledR}$ specimens, there was significant difference between the bond strength of 24 hours and that of 1 week (p<0.05). 3. In Group 4 of the $Charisma^{\circledR}$ specimens, the shear bond strength of specimens aged for 24 hours was significantly higher than the others(p<0.05) 4. There was no significant difference between the shear bond strength of the $Artglass^{\circledR}$ specimens, 5. Most of the $Charisma^{\circledR}$ specimens showed cohesive fractures. Artglass^{\circledR}$ specimens that were etched with acid (phosphoric or hydrofluoric) for 30 sec showed more cohesive fractures.

• 한국경영과학회지
• /
• 제40권4호
• /
• pp.1-18
• /
• 2015

This paper proposes relational capability as a main driver of constructing inter-organizational collaboration networks. Based on social network theory and relational view literature, three components of relational capability are constructed and implemented by an agent-based model. The components include organizational capability, structural capability, and trust between a partner and a focal firm. These three components are updated by two micro mechanisms: structural mechanism and relational mechanism. Structural mechanism is a feedback loop in which the relational capability increases structural capability and vice versa. Relational mechanism is a learning-by-doing process in which a focal firm experiences success or failure of collaboration and the experience increases or decreases cumulative trust in a partner firm. Result of agent-based simulation shows that a collaboration network emerges through interactions of firm's relational capabilities and the characteristics of emerged networks vary with the contribution of structural capability and trust to relational capability. Specifically, in case structural capability contributes more to relational capability, the average degree centrality and collaboration proportion increases as time passes and enters into an equilibrium state. In that case, almost every firms participated in the network collaborates each other so that the emerged network becomes highly cohesive. In case trust contributes more to relational capability, the results are reversed. In an equilibrium state, the balance of contribution between structural capability and trust makes an emerged network larger and maximizes average degree centrality of the network.

• 치위생과학회지
• /
• 제9권4호
• /
• pp.405-412
• /
• 2009

본 연구는 도재소부용 비귀금속에 Au 코팅 층을 형성하고, Au 코팅 층이 금속-도재의 결합력에 미치는 영향을 알아보고자 2출 굴곡 시험 후에 SEM/EDS 방법으로 조사하여 비교하였다. 1. Ni-Cr ally 군과 Co-Cr alloy 군, 그리고 Ti 군의 절단면 시편의 전자현미경 사진에서 Au 코팅 층은 산화층의 확산을 제어하는 것으로 관찰되었다. 2. 2축 굴곡 시험 후에 EDS 분석 결과 Ni-Cr alloy 군과 Co-Cr alloy 군에서 Si 함량은 Au 코팅 층을 형성한 시편에서 약간 감소하였고, 결합실패의 형태는 cohesive failure와 adhesive failure가 혼재된 양상으로 관찰되었다. 3. Ni-Cr alloy 군과 Co-Cr alloy 군에서 Au 코팅 층은 도재-금속 결합력에 미치는 영향은 미미하였다. 4. Ti 군의 결합실패 형태는 Ni-Cr alloy 군과 Co-Cr alloy 군에 비해서 adhesive failure 양상이 두드러지게 관찰되었고, Au 코팅 층은 도재-금속 결합력에 영향을 미치지 않았다. 이상의 결과 비귀금속에 적용한 Au 코팅은 산화층의 확산을 제어 하는 것으로 관찰 되었으나, 금속-도재 간의 결합력 증징에 미치는 효과는 미미하였다. Au 코팅을 이용하여 금속-도재 간의 결합력 증진을 위해서는 많은 연구가 지속되어야 할 것으로 사료된다.