• 한국자기학회지
• /
• 제5권5호
• /
• pp.478-482
• /
• 1995

The iron-based Metglas 2605S3A amorphous alloy ribbons are annealed at $435^{\circ}C$ for various periods from 5 to 210 min, and the effect of annealing is investigated on the dc magnetic properties of the ribbon. Typical square-type hysteresis loops are observed for the ribbons annealed fo 5 min, indicative of the nearly complete removal of residual stresses which are produced during melt-quenching. As the annealing time increases, the coercivity increases and the shape of hysteresis loops transforms to round type and finally to sheared one at the longest annealing time of 210 min. These results may be explained by the formation of clusters with chemical shortorder and very fine crystallites (at the annealing time of 210 min), and the diffusion-induced stresses during the formation of the clusters. For the samples annealed for 5 min, very good dc properties of the squareness ratio, coercivity and maximum permeability are observed, but, rather unexpectedly, the initial permeability is found to be very low. These results are considered to be due to a simple domain structure consisting of very small number of $^{\circ}$ domains.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.186-187
• /
• 2002

Recently, there has been much interest in magnetic thin film patterned in submicron scale because of possible ultrahigh density storage media or logical device applications [1-3]. Various geometries such as rectangle, circle, ring and ellipse type dots have been studied to find the shape showing stable switching behavior from repeated cycles. However, rectangle and circle types may not be suitable for device applications because they have two uncontrollable different magnetization reversal modes: C state and S state, resulting in different coercivity and irreproducible switching[4]. (omitted)

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.236.1-236.1
• /
• 2008

• 한국분말재료학회지
• /
• 제9권5호
• /
• pp.322-328
• /
• 2002

Fe-Co nanocomposite powders with different composition were prepared by chemical vapor condensation (CVC) process and their characterizations were studied by means of X-ray diffraction, transmission electron microscopy, and vibrating sample magnetometer. The particles having the mean size of 5~25 nm consisted of metallic cores and oxide shells. The Co contents and particle size increased with increasing the carrier gas flow rate of Co precursor. The saturation magnetization and coercivity increased with increasing Co content. and the saturation magnetization maximized at the 40 wt.%Co. The Fe-Co nanocomposite powder oxidized at $400^{\circ}C$ showed the maximum coercivity of 1739 Oe.

• Journal of Magnetics
• /
• 제4권3호
• /
• pp.84-87
• /
• 1999

It is shown that progressive crystallization of non-magnetostrictive Co-based metallic glass (VITROVAC 6030) leads to an increase of coercivity by more than three orders of magnitude. The mechani는 responsible for this phenomenon are interpreted showing that the main source for the giant increase of the coercivity is the pinning effect on the domain walls originating from the created crystallites of the size much smaller than the domain width (correlation length for ferromagnetic exchange interactions). It is also shown that gradually devitrified non-magnetostrictive metallic glass is an excellent model material for verification of N el's theory describing the Rayleigh rule.

• 한국세라믹학회지
• /
• 제38권11호
• /
• pp.1008-1014
• /
• 2001

Nanosize의 YIG 분말을 자기광학효과에 뛰어난 첨가제인 Cerium을 첨가하여 에틸렌 글리콜 용매로서 졸-겔법을 이용하여 합성하였다. 점도와 pH가 일정한 값을 유지하고, aging시간에 따라 점도변화가 없는 120분에서 150분사이의 반응시간에서 가장 안정한 상태의 용액을 얻을 수 있었다. 건조시킨 YIG 분말로서 DTA 및 XRD 측정결과 80$0^{\circ}C$에서 단일상의 YIG를 합성할 수 있었고, Cerium 첨가량 증가에 따라 12면체 Y 이온 자리로의 치환에 의해 격자상수가 12.3921에서 12.4130$\AA$까지 증가하는 경향을 보였다. 80$0^{\circ}C$에서 105$0^{\circ}C$까지 열처리 온도 증가에 따라 평균입자크기는 40nm~330nm정도를 보였고, 포화자화값(M$_{s}$)은 YIG 결정성 증대 및 미량의 orthoferrite의 감소에 의해 18.37~21.25emu/g으로 증가하였으며, 보자력(H$_{c}$)은 80$0^{\circ}C$부터 90$0^{\circ}C$ 사이에서는 증가하다가, 그 이상 온도에서는 감소하는 경향을 보였다. Ce 첨가량이 증가함에 따른 보자력값은 큰 변화가 없었으며, 포화자화값은 0.1 mol%일 때 가장 큰 값을 지녔고, 이후 미량의 orhtoferrite 증가로 인해 감소하는 경향을 보였으나, 큐리 온도(T$_{c}$)에는 영향을 미치지 않았다.않았다.

• 한국자기학회지
• /
• 제7권1호
• /
• pp.49-54
• /
• 1997

급속응고된 (N $d_{14.73}$F $e_{78.67}$ $B_{6.60}$)$_{100-x}$ $Co_{x}$(X = 0, 1, 2, 3)리본의 열처리 온도에 따른 자기적 특성, 상변화, 미세조직의 변화에 대해 연구하였다. Co의 첨가로 인해 N $d_{2}$F $e_{14}$B 상의 결정입도가 균일해졌으며, Nd-rich 상들이 입계에 잘 분포됨으로써 보자력($_{i}$ $H_{c}$)이 향상되어 X=2에서 최대 20.3 kOe를 얻었다. 이와 같은 미량의 Co에 의한 보자력 향상의 효과는 고온성형을 요하는 hot-press 및 die-upset에서도 동일하게 나타났으며 최대의 보자력은 X=2에서 hot press시에 16.9 kOe, die-upset 시에 15.12 kOe 이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.242-244
• /
• 1996

The effects of $Co_{67}$C $r_{33}$ underlayer on the crystallographec and magnetic characteristics of the Co-Cr-Ta layer deposited on the underlayer was investigated. The diffraction intensity $I_{p(002)}$ of Co-Cr-Ta layers on the $Co_{67}$C $r_{33}$ layer was stronger than that of single layer and Co-Cr-Ta/Ti double layer. Therefore, the crystallinity of Co-Cr-Ta layer was improved by the $Co_{67}$C $r_{33}$ underlayers rather than Ti ones. However, the coercivity $H_{c}$ of Co-Cr-Ta layers deposited on $Co_{67}$C $r_{33}$ underlayer was as low as 250 Oe even at substrate temperature of 22$0^{\circ}C$. This $H_{c}$ decrease seems to be attributed to the effect of the $Co_{67}$C $r_{33}$ underlayer as well as interval time between deposition of the underlayer and the Co-Cr-Ta layer.yer.layer.yer.

• 한국자기학회지
• /
• 제9권2호
• /
• pp.98-103
• /
• 1999

DC, RF 스퍼터링 방법으로 제조한 glass/Ta/NiFeI/CoI(t)/Cu/CoII(3/4 t)/NiFeII/FeMn 스핀밸브구조에서 아르곤(Ar)가스압력과 코발트(Co)층의 두께에 변화를 주어 보자력(Hc)과 교환이방성자계(Hex) 그리고 자기저항변화율(MR)에 대해 연구하였다. 아르곤가스 압력에 대한 보자력은 4mTorr에서 2.8Oe로 가장 작았으며 교환이방성자계는 6mTorr에서 약 50.0Oe, 자기저항변화율은 10mTorr에서 5.3%를 얻을 수 있었다. 또한 코발트층의 두께변화에 대한 보자력은 코발트층(CoI)의 두께가 40$\AA$일 때 3.0Oe, 교환이방성자계는 13$\AA$두께에서 65.9Oe 그리고 자기저항변화율은 27$\AA$과 34$\AA$의 두께에서 4.7%를 얻을 수 있었다.

• 열처리공학회지
• /
• 제11권4호
• /
• pp.241-246
• /
• 1998

It is well known for 410L ferritic stainless steel powder to applicate a sensor ring in anti-lock brake system of automobile, several studies, because of its excellent magnetic properties. This study was carried out to investigate the magnetic properties such as the maximum magnetic induction, coercivity and maximum permeability of the materials with functions of sintering density, time and temperature, and concluded as follows: 1. Sintering under the circumstances of Ar gas and the temperature of $1250^{\circ}C$ for 60min, showed that nitrogen was increased, whereas carbon and oxygen decreased in quantities. 2. Both maximum magnetic induction value of 4700Gauss and permeability of 200 were obtained at the maximum sintering density of $6.89g/cm^2$. Here, the properties showed a linear increasement with increasing the sintering density. 3. Coercivity sharply decreased with incresing the sintering density and reached to 7.6Oe at the maximum sintering density of $6.89g/cm^2$.