• Nuclear Engineering and Technology
• /
• v.47 no.5
• /
• pp.588-595
• /
• 2015

This study presents an effective method for additional recovery of residual actinides in liquid electrodes after the electrowinning process of pyroprocessing. The major distinctive feature of this method is a reactor with multiple reaction cells separated by partition walls in order to improve the recovery yield, thereby using the interelement difference in diffusion coefficients within the liquid electrode and controlling the selectivity and purity of element recovery. Through an example of numerical simulation of the diffusion scenarios of individual elements, we verified that the proposed method could effectively separate the actinides (U and Pu) and rare-earth elements contained in liquid cadmium. We performed a five-step consecutive recovery process using a simplified conceptual reaction cell and recovered 58% of the initial amount of actinides (U + Pu) in high purity (${\geq}99%$).

• Food Science of Animal Resources
• /
• v.32 no.2
• /
• pp.247-251
• /
• 2012

This study was carried out to investigate the applicability of the detection of central nervous system tissues (CNST) in beef by-products in retail market. Beef by-products including large intestine, brain, spinal cord, liver, lung, spleen and heart were purchased and tested for the presence of CNST using an ELISA method. The ELISA test was evaluated and showed a high correlation coefficient by a standard curve (R value = 0.999). Based on the analytical instruction, the positive indication of the CNST contamination of brain and spinal cord was detected above 0.1% but large intestine, liver, lung, spleen, and heart was negative. Result suggests that the ELISA method is applicable to a real meat system and may provide a method to ensure confidence for consumer against bovine spongiform encephalopathy (BSE).

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.253-257
• /
• 2002

So far. the common elasticity data of textile fabrics has not been present because the method depends on the knowledge of measurement operators. In this paper, the new measurement equipment using road cel1 is presented to measure the coefficient of textile fabrics in real time. The measurement method is based on the volta among textile fabrics. The textiles with strong elasticity are high voltage produced from others are low. The presented method can be applied to visualize the textile, sew the cloth, control textile fabrics. Also. these measurement datum are used to B2B electronic trading system.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.4
• /
• pp.1-8
• /
• 2000

The time simulation of motion responses of dolphin-moored BMP in waves is presented. The equation of motion based on Cummin's theory of impulse responses are employed, and solved in time domain by using the Newmark $\beta$ method. The hydrodynamic coefficient and first order wave exciting forces involved in the equations are obtained from a three-dimensional panel method in the frequency domain. The second order wave drift forces and mooring for dolphin system are taken into account. As for numerical example, time domain analysis are carried out for a BMP in irregular wave condition.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.417-419
• /
• 1998

The ICD(Individual-Channel-Design) is a multivariable control design method based on the classical frequence response, in which the channel decomposition and the loop shaping on frequence domain are introduced. However, in this manner, it is difficult to satisfy time domain specifications such as overshoot, rise time, settling time. To solve the problem, we propose a new design method using CDM(Coefficient Diagram Method). And a new feedforward compensator is introduced for reducing interconnections.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.6
• /
• pp.22-30
• /
• 2005

This paper proposes a measurement method for the surface shape of micro-parts by using an atomic force microscope(AFM). To this end, two techniques are presented: First, the measurement range is expanded by using an image matching method based on correlation coefficients. To account for the inaccuracy of the coarse stage implemented in AFM, the image matching technique is applied to two neighboring images intentionally overlapped with each other. Second, a method to measure the shape of relatively large specimen is proposed that utilizes the inherent trigger mechanism due to the atomic force. The proposed methods are proved effective through a series of experiments.

• Journal of electromagnetic engineering and science
• /
• v.16 no.2
• /
• pp.119-125
• /
• 2016

In this paper, a method for identifying the appropriate position on the ground plane for antennas is proposed based on the current correlation coefficient ($C^3$). This method explains that the mutual coupling between antennas when locating several antennas on the same ground plane is necessary. Given the current distribution on the ground plane induced by each antenna, easily estimating the coupling between antennas is possible. This paper also demonstrates that the proposed method can be used in the design of a multi-input multi-output system. The measured data are in good agreement with the simulation results.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.138-141
• /
• 2001

This paper presents a study on successive approximation measurement of mechanical parameters for motor control system. At the first step of servo system installation, control system gain tuning is troublesome work. Recently, autotuning method of motion controller for motor drive system is based on parameter measurement and identification. On the case of first order mechanical system (mechanical parameters are modified by simple inertia and friction), it is necessary for good response to get the accurate measurement or identification of the mechanical parameters . In this paper, novel method applies the binary successive approximation measurement to the inertia and friction coefficient. Computer simulation and experiment for the proposed method will show verification of accuracy and usefulness.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.165-167
• /
• 2001

This paper presents a study on successive approximation measurement of mechanical parameters for motor control system. At the first step of servo system installation, control system gain tuning is troublesome work. Recently, auto-tuning method of motion controller for motor drive system is based on parameter measurement and identification. On the case of first order mechanical system (mechanical parameters are modified by simple inertia and friction), it is necessary for good response to get the accurate measurement or identification of the mechanical parameters. In this paper, novel method applies the binary successive approximation measurement to the inertia and friction coefficient. Computer simulation and experiment for the proposed method will show verification of accuracy and usefulness.

• Nuclear Engineering and Technology
• /
• v.49 no.6
• /
• pp.1143-1156
• /
• 2017

This paper describes recent development activities of the GENESIS code, which is a transport code for heterogeneous three-dimensional geometry, focusing on applications to reactor core analysis. For the treatment of anisotropic scattering, the concept of the simplified Pn method is introduced in order to reduce storage of flux moments. The accuracy of the present method is verified through a benchmark problem. Next, the iteration stability of the GENESIS code for the highly voided condition, which would appear in a severe accident (e.g., design extension) conditions, is discussed. The efficiencies of the coarse mesh finite difference and generalized coarse mesh rebalance acceleration methods are verified with various stabilization techniques. Use of the effective diffusion coefficient and the artificial grid diffusion coefficients are found to be effective to stabilize the acceleration calculation in highly voided conditions.