• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.195-200
• /
• 2008

The accuracy of classifying pixels in HIRIS images is usually degraded by noisy bands since noisy bands may deform the typical shape of spectral reflectance. Proposed in this paper is a statistical method for noisy band removal which mainly makes use of the correlation coefficients between bands. Considering each band as a random variable, the correlation coefficient measures the strength and direction of a linear relationship between two random variables. While the correlation between two signal bands is high, existence of a noisy band will produce a low correlation due to ill-correlativeness and undirectedness. The application of the correlation coefficient as a measure for detecting noisy bands is under a two-pass screening scheme. This method is independent of the prior knowledge of the sensor or the cause resulted in the noise. The classification in this experiment uses the unsupervised k-nearest neighbor algorithm in accordance with the well-accepted Euclidean distance measure and the spectral angle mapper measure. This paper also proposes a hierarchical combination of these measures for spectral matching. Finally, a separability assessment based on the between-class and within-class scatter matrices is followed to evaluate the performance.

• Journal of Broadcast Engineering
• /
• v.5 no.1
• /
• pp.123-129
• /
• 2000

This paper addresses a new double detection algorithm which is based on the fuzzy control in the adaptive echo canceller of communication system. In this method, the two input of the fuzzy inference for detecting double talk condition are used. The one is the cross-correlation coefficient between the error signal and the primary signal which is the summed signal of the real echo signal and the near-end signal. The other is the cross-correlation coefficient between the estimation error signal and the primary signal. The fuzzy controller made a fuzzification for two inputs by the membership functions of trapezoid and them became the composition using inference rules. The composed result is defuzzificated by the center gravity method. The output is compared with two threshold values to detect double talk and echo path variation effectively. It is confirmed by computer simulation that this fuzzy double talk detector is able to track echo path variation accurately.

• Nuclear Engineering and Technology
• /
• v.29 no.6
• /
• pp.488-499
• /
• 1997

The measurements of the moderator temperature coefficient (MTC) are performed to demonstrate that the calculational model produces results that are consistent with the measurements. Since negative MTC is also a technical specification value that may limit the cycle length, it is important to measure it as accurately as possible. In this report, preferred choice of test method depending on the time in cycle, best power indication and temperature definition in MTC calculation were determined based on the MTC test results taken during initial startup testing and at 2/3 cycle burnup in the Yonggwang nuclear power plant. The results show that the ratio and rodded methods provided good agreement with the predictions during initial startup testing. However, near end-of-cycle the depletion method gives better results, and so is suggested to be used in the MTC measurements at 2/3 cycle burnup. The use of primary Delta T power as a power indicator in the MTC calculations is highly advisable since it responds with good consistent results very quickly to changes unlike secondary calorimetric power. For the appropriate temperature definitions used in the MTC calculations, it is considered that the arithmetic average temperature measured simply by inlet and outlet thermocouples is preferred. Although volumetric average temperature provides better results, the improvement is not sufficient to compensate for the simplicity of calculations by arithmetic average temperature.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.7
• /
• pp.643-649
• /
• 2013

In this paper, human heartbeat detection using signal reflected from the antenna which is varied reflection coefficient by near field variation of the antenna. For detection reflected signal from antenna, 20 dB directional coupler is used because of not affecting transmitting signal. Variance of reflection coefficient of dipole antenna is about 0.07 dB which is too small the distinction between heartbeat and noise. Sensitivity increasing method is applied and heartbeat is clearly detected. Due to phase and magnitude errors come from discrete value components, antenna is located some points in experiments ro find optimum sensitivity position. And providing verification of using communication signal, heartbeat detection when frequency modulated signal which have 4 MHz bandwidth is applied.

• Korean Journal of Plant Resources
• /
• v.24 no.6
• /
• pp.675-687
• /
• 2011

Mulberries have importance in the sericulture industry as food for Bombyx mori, silkworm reared for its silk. Korean Morus alba have many cultivars and, for the protection of these cultivars and for utilization in plant-breeding programs, genetic information and the diversity among cultivars are essential. This study with 14 mulberry genotypes was undertaken using RAPD and ISSR fingerprinting to discover the genetic divergences between cultivars. Polymorphism rate among the cultivars produced by RAPD primer was found to be 64.48% and 66.29% relative to ISSR primer. The genetic relationships among the cultivars were identified using a dendrogram constructed with the UPGMA clustering method. Nei's method was used to calculate the genetic dissimilarity coefficients between each pair of genotypes, and the highest dissimilarity coefficient of 0.246 was exhibited between Suwon and Hwanggum cultivars. To determine the efficiency of each primer, a polymorphic index was calculated, and the robustness of the dendrogram was checked using cophenetic correlation coefficient. The results of this study can be utilized for the improvement of mulberry varieties in plant-breeding programs.

• ETRI Journal
• /
• v.41 no.5
• /
• pp.637-647
• /
• 2019

Separating highly correlated users can reduce the loss caused by spatial correlation (SC) in multiuser multiple-input multiple-output (MU-MIMO) systems. However, few accurate analyses of the loss caused by SC have been conducted. In this study, we define signal-to-interference-plus-noise ratio (SINR) loss to characterize it in multiuser multiple-input single-output (MU-MISO) systems, and use coefficient of correlation (CoC) to describe the SC between users. A formula is deduced to show the accurate relation between SINR loss and CoC. Based on this relation, we propose a user selection method that utilizes CoC to minimize the average SINR loss of users in massive MU-MISO systems. Simulation results verify the correctness of the relation and show that the proposed user selection method is very effective at reducing the loss caused by SC in massive MU-MISO systems.

• Structural Engineering and Mechanics
• /
• v.90 no.4
• /
• pp.357-370
• /
• 2024

Due to the fact that the mechanism of the effects of temperature and initial geometric imperfection on low-velocity impact problem of axially moving plates is not yet clear, the present paper is to fill the gap. In the present paper, the nonlinear dynamic behavior of axially moving imperfect graphene platelet reinforced metal foams (GPLRMF) plates subjected to lowvelocity impact in thermal environment is analyzed. The equivalent physical parameters of GPLRMF plates are estimated based on the Halpin-Tsai equation and the mixing rule. Combining Kirchhoff plate theory and the modified nonlinear Hertz contact theory, the nonlinear governing equations of GPLRMF plates are derived. Under the condition of simply supported boundary, the nonlinear control equation is discretized with the help of Gallekin method. The correctness of the proposed model is verified by comparison with the existing results. Finally, the time history curves of contact force and transverse center displacement are obtained by using the fourth order Runge-Kutta method. Through detailed parameter research, the effects of graphene platelet (GPL) distribution mode, foam distribution mode, GPL weight fraction, foam coefficient, axial moving speed, prestressing force, temperature changes, damping coefficient, initial geometric defect, radius and initial velocity of the impactor on the nonlinear impact problem are explored. The results indicate that temperature changes and initial geometric imperfections have significant impacts.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.378-388
• /
• 2015

This paper proposes a pulse width modulation (PWM)-based sliding mode controller (SMC) for a full-bridge DC-DC converter that can eliminate static output voltage error. Hysteretic SMC in DC-DC converter does not have a fixed switching frequency, and applying hysteretic SMC to full-bridge converters is difficult. Fixed-frequency SMC, which is also called PWM-based SMC, based on equivalent control overcomes these shortcomings. However, the controller order reduction in equivalent control in PWM-based SMC causes static output voltage error. To resolve this issue, an integral item is added to the PWM-based SMC. Sliding mode coefficients are designed by applying a standard second-order system to the sliding mode surface. The effect of adding an integral item on the controller is analyzed, and an integral coefficient design method is proposed. Experiment results on a three-level full-bridge DC-DC converter verify the control scheme and design method proposed in this paper.

• Tunnel and Underground Space
• /
• v.22 no.2
• /
• pp.106-119
• /
• 2012

Roughness of rock joint has generally been characterized based upon geometrical aspects of a two-dimensional surface profile. The appropriate description of joint roughness, however, should consider the features of roughness mobilization at contact areas under normal and shear loads. In this study, direct shear tests were conducted on the replicas of tensile fractured gneiss joints and the influence of the shear direction on the shear behavior and effective roughness was examined. In this procedure, a joint surface was represented as a group of triangular planes, and the steepness of each plane was characterized using the concepts of the active and inactive micro-slope angles. The contact areas at peak strength which were estimated by a numerical method showed that the locations of the contact areas were mainly dependent on the distribution of the micro-slope angle and the shear behavior of joint was dominated by only the fractions with active micro-slope angles. Therefore, a three-dimensional coefficient for the quantification of rock joint roughness is proposed based on the distribution of active micro-slope angle: active roughness coefficient, $C_r$. Comparison of the active roughness coefficient and the peak shear strength obtained from the experiment suggests that the active roughness coefficient is the effective parameter to quantify the surface roughness and estimate the shear behavior of rock joint.

• Korean journal of applied entomology
• /
• v.37 no.1
• /
• pp.31-37
• /
• 1998

Random amplified polymorphic DNA (RAPD) markers were used to analyze genetic similarity among 8 clones of apierous green peach aphid, two types (M. persicae Sulzer and M. nicotianae lack man) classified by their mo~hologi~cahla raters and host preference (Blackman, 1987), collected from tobacco plants. The genetic variation among these clones was evaluated by polymerase chain reaction amplification with 20 random primers. The higher GC contents of primers, the better in amplification efficiency of PCR reaction in general. The genetic similarities among eight aphid clones were analyzed from UPGMA (unweighted pair group average method) cluster analysis based on simple matching coefficient. The range of genetic similarity coefficients was 0.414 to 0.808. The most close relationship among the clones was similarity coefficient of 0.808 between the PG2 and the PG3 clone. The eight aphid clones analyzed were clustered into three groups by the genetic similarity coefficient. The first group, PG1, PG2, PG3 clone including in M. persicae type by their morphological characters and RED clone in M. nicotianae type was clustered at the genetic similarity coefficient of 0.643. The second group, GR1, GR2, BRN in M. nicotianae type was at the 0.636;and the third group was DBR clone in M. persicae type. The results did not indicate any correlation between m&-phological types (M. persicae and M. nicotianae) and RAPD polymorphism. We could not detect any obvious genetic relationships of the two morphological types of the green peach aphid collected from tobacco plants.