• Journal of IKEEE
• /
• v.28 no.3
• /
• pp.279-284
• /
• 2024

In this paper, we propose a novel method for implementing a microstrip patch antenna with circular polarization characteristics through an asymmetric inset feed structure. The proposed method involves designing an antenna by taking advantage of the length difference of the asymmetric inset slots inserted into the antenna, as well as the lengths of additional slots incorporated into the design to achieve circular polarization characteristics. Using this approach, we designed and fabricated an antenna operating at 2.4 GHz in the S-band for satellite communication systems, utilizing a 1 mm thick FR-4 dielectric substrate. The measurement results confirmed a gain of 2dBi, an axial ratio of less than 3dB, and a reflection coefficient below -10dB in the frequency range of 2.35 to 2.43 GHz. Based on these results, it is expected that by employing the proposed method, circularly polarized antennas utilizing inset feeds can be realised, thereby making them applicable in small satellite communication systems and various wireless IoT environmental service applications that use the ISM band.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.513-523
• /
• 2022

The purpose of settlement management when treating soft ground through preloading is to determine the amount of settlement, check the progression of consolidation, and compare the settlement with the target settlement amount. Of the various methods available for predicting settlement based on measured data, the hyperbolic method was used in this study to analyze the settlement behavior of soft ground considering the creep behavior resulting from staged fill. Two versions of the method were used: the existing hyperbolic method, and a modified hyperbolic method. The existing hyperbolic method predicts the settlement amount using data for the final settlement section only during soft ground treatment through staged fill, for which the coefficient of consolidation behavior (k) was computed to give a predicted final consolidation settlement amount of S_r = 1.05 cm. In comparison, using the modified method, a predicted final consolidation settlement of S_r = 0.50 cm is obtained by considering the data for each staged fill section. These results show that the modified method considering data from the staged settlement was more accurate than the existing method considering data only from the final settlement section. This modification to the hyperbolic method therefore represents an improvement in performance over the existing method.

• Journal of Ecology and Environment
• /
• v.37 no.4
• /
• pp.209-216
• /
• 2014

This study was undertaken to suggest an effective fisheries resources management system by using stock assessment and potential yield analyses of crucian carp population in the mid-upper system of the Seomjin River. Fieldwork was conducted seasonally from 2008 to 2009 in the mid-upper system of the Seomjin River. The stock assessment was carried out by the swept area method and the potential yield was estimated by improved fisheries resource potential estimation system based on the Allowable Biological Catch. Also, the yield-per-recruit analysis was used to review the efficient management implication of the resource, Carassius auratus. As a result, the age at first capture ($t_c$) was estimated as 1.468 year, converted body length (BL) was 10.8 cm. Meaning the current fishing intensities, the instantaneous coefficient of fishing mortality (F) was $0.067year^{-1}$, and the yield-per-recruit analysis showed that the current yield per recruit was estimated to be 15.999 g with F and $t_c$. The instantaneous rate of fishing mortality that provides for Allowable Biological Catch ($F_{ABC}$) based on the current $t_c$ and F was estimated as $0.618year^{-1}$. Therefore, the optimum fishing intensities could be achieved at the higher fishing intensity for Carassius auratus. The calculated annual stock of C. auratus was estimated as 7,608 kg, and the potential yield was estimated as 343 kg with $t_c$ and F at the fixed current level. Using yield-per-recruit analysis, if F and $t_c$ were set at $0.618year^{-1}$ and 2 year, the yield per recruit and total allowable catch would be predicted to increase to 62 g and 2,531 kg by about 3.9 times and 7.3 times, respectively.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.7 no.3
• /
• pp.441-452
• /
• 2000

This study was a descriptive research to investigate the health promotion behavior and health status based on Korean adult's constitution. The subjects for the study were 96 adults who were the residents either in Seoul or Taegu city. The instruments used for this study included a survey of general characteristics, health promotion behavior and health status. The data were analyzed using t-test, ANOVA, Pearson correlation coefficient and Scheffe method as post hoc test. The results of this study were summarized as follows : 1) There was no significant difference on the health promotion behavior and health status by constitutions. But, in the relationship between five factors of the health promotion behavior and constitution, there was significant difference on health responsibility by constitutions(F=3.31. P=.041). According to the scheffe test, Taeumin group performed better behavior for the health promotion than soyangin group. 2) Health promotion behavior was significantly related to health status (r=-.24, P=.025), suggesting that the person with high health promotion behavior get higher health status scores. 3) In the relationship between general characteristics variables and health promotion behavior, there were significant differences in education(F=3.12, P=.031), economic status(F=4.09, P=.021), religion (F=3.12, P=.031). The level of health promotion behavior of high educated persons and high economic status persons was high. The persons who believe in Catholicism performed better behavior for the health promotion than the persons who don't get religion. Based on these results, to determining and fully understanding client's constitution are the foundations of Eum-Yang and personal character. Therefore, we have to consider the constitution when we provide nursing care. When we consider the differences of health promotion behavior according to constitution, we can provide the client with the kind of nursing care and health education to satisfy their demands.

• Journal of Korean Clinical Nursing Research
• /
• v.18 no.3
• /
• pp.354-367
• /
• 2012

Purpose: This study was done to verify validity and reliability of a neonatal patient classification system (NeoPCS-1). Methods: An expert group of 8 nurse managers and 40 nurses from 8 Neonatal Intensive Care Units in Korea, verified content validity of the measurement using item level content validity index (I-CVI). The participants were nurses caring for 469 neonates. Data were collected from November 11 to December 14, 2011 and analyzed using descriptive statistics, ANOVA, intraclass correlation coefficient, and K-cluster analysis with PASW 18.0 program. Results: Nursing domains and activities included 8 items with 91 activities. I-CVI was above .80 in all areas. Interrater reliability was significant between two raters (r=.95, p<.001). Classification scores for participants according to patient types and nurses' intuition were significantly higher for the following patients; gestational age (${\leq}29$ weeks), body weight (<1,000 gm), and transfer from hospital. Six groups were classified using cluster analysis method based on nursing needs. Patient classification scores were significantly different for the groups. Conclusion: These results show adequate validity and reliability for the NeoPCS-1 based on nursing needs. Study is needed to refine the measurement and develop index scores to estimate number of nurses needed for adequate neonatal care.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.4
• /
• pp.174-180
• /
• 2006

The wheel slip control systems are able to control the braking force more accurately and can be adapted to different vehicles more easily than conventional braking control systems. In order to achieve the superior braking performance through the wheel slip control, real-time information such as the tire braking force at each wheel is required. In addition, the optimal target slip values need to be determined depending on the braking objectives such as minimum braking distance, stability enhancement, etc. In this paper, a wheel slip control system is developed for maintaining the vehicle stability based on the braking monitor, wheel slip controller and optimal target slip assignment algorithm. The braking monitor estimates the tire braking force, lateral tire force and brake disk-pad friction coefficient utilizing the extended Kalman filter. The wheel slip controller is designed based on the sliding mode control method. The target slip assignment algorithm is proposed to maintain the vehicle stability based on the direct yaw moment controller and fuzzy logic. The performance of the proposed wheel slip control system is verified in simulations and demonstrates the effectiveness of the wheel slip control in various road conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1577-1584
• /
• 2002

This paper develops a finite element model for studying the occupant behavior and injury cofficients of a large-sized cab-over type truck. Since it does not have a room to absorb collision energy and deformation in front of the passenger compartment the deformation is directly transmitted to the passenger compartment. Moreover, since its steering column is attached on the frame, severe deformation of the frame directly affects on the steering wheel's movement. Therefore, if the occupant behavior and injury coefficients analysis is performed using a finite element model developed based on a sled test, it is very difficult to expect acquiring satisfactory results. Thus, the finite element model developing in this paper is based on the frontal crash test in order to overcome the inherent problems of the sled test based model commonly used in the passenger car. The occupant behavior and injury coefficients analysis is performed using PAM-CRASH installed in super-computer SP2. In order to validate the reliability of the developed finite element model, a frontal crash test is carried out according to a test method used fur developing truck occupant's secondary safety system in european community and japan. That is, test vehicle's collision direction is vertical to the rigid barrier and collision velocity is 45kph. Thus, measured vehicle pulses at the lower parts of the left and right B-pilla., dummy chest and head deceleration profiles, HIC(head injury criterial) and CA(chest acceleration) values, and dummy behavior from the frontal crash test are compared to the analysis results to validate reliability of the developed model.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.852-863
• /
• 2016

Wood-plastic composite (WPC) is a promising and sustainable material, and refers to a combination of wood and plastic along with some binding (adhesive) materials. In comparison to pure wood material, WPCs are in general have advantages of being cost effective, high durability, moisture resistance, and microbial resistance. The properties of WPCs come directly from the concentration of different components in composite; such as wood flour concentration directly affect mechanical and physical properties of WPCs. In this study, wood powder concentration in WPC was determined by Fourier transform near-infrared (FT-NIR) and Fourier transform infrared (FT-IR) spectroscopy. The reflectance spectra from WPC in both powdered and tableted form with five different concentrations of wood powder were collected and preprocessed to remove noise caused by several factors. To correlate the collected spectra with wood powder concentration, multivariate calibration method of partial least squares (PLS) was applied. During validation with an independent set of samples, good correlations with reference values were demonstrated for both FT-NIR and FT-IR data sets. In addition, high coefficient of determination (${R^2}_p$) and lower standard error of prediction (SEP) was yielded for tableted WPC than powdered WPC. The combination of FT-NIR and FT-IR spectral region was also studied. The results presented here showed that the use of both zones improved the determination accuracy for powdered WPC; however, no improvement in prediction result was achieved for tableted WPCs. The results obtained suggest that these spectroscopic techniques are a useful tool for fast and nondestructive determination of wood concentration in WPCs and have potential to replace conventional methods.

• Journal of Korea Multimedia Society
• /
• v.6 no.7
• /
• pp.1149-1158
• /
• 2003

Content adaptive watermark embedding algorithm using a stochastic image model in the multiwavelet transform is proposed in this paper. A watermark is embedded into the perceptually significant coefficients (PSCs) of each subband using multiwavelet transform. The PSCs in high frequency subband are selected by SSQ, that is, by setting the thresholds as the one half of the largest coefficient in each subband. The perceptual model is applied with a stochastic approach based on noise visibility function (NVF) that has local image properties for watermark embedding. This model uses stationary Generalized Gaussian model characteristic because watermark has noise properties. The watermark estimation use shape parameter and variance of subband region. it is derive content adaptive criteria according to edge and texture, and flat region. The experiment results of the proposed watermark embedding method based on multiwavelet transform techniques were found to be excellent invisibility and robustness.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.230-238
• /
• 2017

Carbonation is a representative deterioration for underground structure, which causes additional repair for service life. This study proposes a simplified equation for optimum repair timing without complicated probability calculation, considering initial and repair conditions For the work, initial service life, extended service life through repair, and their COVs(Coefficient of Variation) are considered, and the periods which can reduce number of repair are evaluated. Assuming the two service lives to be independent, the repair timings are derived from 10 to 50 years based on the probabilistic method, and the regression analysis technique for optimum repairing timing is proposed. Decreasing COV has insignificant effect on reducing repairing number but shows a governing effect on changes in probability near the critical repairing stage. The extension of service life through repairing is evaluated to be a critical parameter for reducing repairing number. The proposed technique can be efficiently used for maintenance strategy with actual COV of initial and additional service life due to repairing.