• Journal of the Korea Society of Computer and Information
• /
• v.15 no.7
• /
• pp.83-90
• /
• 2010

In vocabulary recognition system has reduce recognition rate unrecognized error cause of similar phoneme recognition and due to provided inaccurate vocabulary. Input of inaccurate vocabulary by feature extraction case of recognition by appear result of unrecognized or similar phoneme recognized. Also can't feature extraction properly when phoneme recognition is similar phoneme recognition. In this paper propose vocabulary recognition post-process error correction system using phoneme likelihood based on phoneme feature. Phoneme likelihood is monophone training phoneme data by find out using MFCC and LPC feature extraction method. Similar phoneme is induced able to recognition of accurate phoneme due to inaccurate vocabulary provided unrecognized reduced error rate. Find out error correction using phoneme likelihood and confidence when vocabulary recognition perform error correction for error proved vocabulary. System performance comparison as a result of recognition improve represent MFCC 7.5%, LPC 5.3% by system using error pattern and system using semantic.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.135-141
• /
• 2003

In arrayed waveguide grating (AWG) devices whose waveguides were composed of polymer with negative thermo-optic coefficient as overcladding, and silica with positive thermo-optic coefficient as both core and undercladding, we investigated the temperature dependence of the central wavelength using two-dimensional SFDM. From these results, it was confirmed that the temperature dependence can be nearly eliminated by adjusting the refractive index of the cladding and the thickness of the silica thin film upper-loaded on the core. Based on the numerical calculations, the AWG device with polymer overcladding was fabricated. and its optical characteristics were compared with those of the orginal silica AWG device. The introduction of polymer overcladding decreased the temperature dependence of the central wavelength from 0.0130 nm/$^{\circ}C$ to 0.0028 nm/$^{\circ}C$ without deteriorating the insertion loss and crosstalk characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.967-975
• /
• 2012

This paper presents a method to measure reflection coefficients of microwave devices or antennas based on time domain analysis with sampling oscilloscopes. The reflection coefficients were extracted by the Fourier transformation of echo pulses from devices with respect to the 20 GHz incident pulse signals. The three-error terms, which are commonly used for the correction of a microwave network, were determined using a 3.5 mm calibration kit. In addition, a modified error-correction model associated with a directional coupler for reflection coefficient measurements is introduced. The results were compared with those of measured with a commercial vector network analyzer.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.6
• /
• pp.9-18
• /
• 2017

The objective of this study was to estimate the climate change impact on inflow to Namgang Dam using SWAT (Soil and Water Assessment Tool) model. The SWAT model was calibrated and validated using observed flow data from 2003 to 2014 for the study watershed. The $R^2$ (Determination Coefficient), RMSE (Root Mean Square Error), NSE (Nash-Sutcliffe efficiency coefficient), and RMAE (Relative Mean Absolute Error) were used to evaluate the model performance. Calibration results showed that the annual mean inflow were within ${\pm}5%$ error compared to the observed. $R^2$ were ranged 0.61~0.87, RMSE were 1.37~7.00 mm/day, NSE were 0.47~0.83, and RMAE were 0.25~0.73 mm/day for daily runoff, respectively. Climate change scenarios were obtained from the HadGEM3-RA. The quantile mapping method was adopted to correct bias that is inherent in the climate change scenarios. Based on the climate change scenarios, calibrated SWAT model simulates the future inflow and evapotranspiration for the study watershed. The expected future inflow to Namgang dam using RCP 4.5 is increasing by 4.8 % and RCP 8.5 is increasing by 19.0 %, respectively. The expected future evapotranspiration for Namgang dam watershed using RCP 4.5 is decreasing by 6.7 % and RCP 8.5 is decreasing by 0.7 %, respectively.

• KIISE Transactions on Computing Practices
• /
• v.21 no.8
• /
• pp.531-536
• /
• 2015

The speech recognition is an active research area in the human computer interface (HCI). The objective of this study is to control digital devices with voices. In addition, the mouse is used as a computer peripheral tool which is widely used and provided in graphical user interface (GUI) computing environments. In this paper, we propose a method of controlling the mouse with the real-time speech recognition function of a smartphone. The processing steps include extracting the core voice signal after receiving a proper length voice input with real time, to perform the quantization by using the learned code book after feature extracting with mel frequency cepstral coefficient (MFCC), and to finally recognize the corresponding vowel using hidden markov model (HMM). In addition a virtual mouse is operated by mapping each vowel to the mouse command. Finally, we show the various mouse operations on the desktop PC display with the implemented smartphone application.

• Korean Journal of Materials Research
• /
• v.3 no.3
• /
• pp.292-299
• /
• 1993

In this paper the effects of the length of carbon fiber on the wear properties of carboni carbon composites were investigated. Carbon/carbon composites were fabricated by the liquid impregnation method using the resol-type phenolic resin as a matrix precursor and PAN-based, non-surface treated carbon fiber as a reinforcement. The measured values of the friction coefficient of carbon/carbon composites against AlSl 304 stainless steel ranged from 0.2 to 0.3 under the operating condition used in this study. The effect of the length of carbon fiber on the friction coefficient of carbon/carbon composites were not found. But, it was realized that the wear rate of carbon/carbon composites tends to increase, as the length of carbon fiber increases.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.9-15
• /
• 2012

We prepared a series of aromatic liquid crystals (LCs) based on wholly aromatic ester units with the reactive end group methyl maleimide by means of melt condensation method, and the resulting LCs were thermally crosslinked to produce liquid crystalline thermoset (LCT) films. The synthesized LCs and LCTs were characterized with Fourier transform infrared (FTIR) spectroscopy, wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), thermomechanical analysis (TMA), and polarizing optical microscopy (POM) with a hot stage. The glass transition temperature ($T_g$) and coefficient of thermal expansion are strongly affected by the mesogen units in their main chain structures. The $p$-substituted biphenyl LC was found to have the highest thermal property value.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1924-1929
• /
• 2007

Nowadays, a lot of related data obtained from these research could be given a new present meaning to accomplish the original purpose of the whole research as a human project. The method of tumor classification based on microarray could contribute to being accurate tumor classification by finding differently expressing gene pattern statistically according to a tumor type. Therefore, the process to select a closely related informative gene with a particular tumor classification to classify tumor using present microarray technology with effect is essential. In this thesis, we used cDNA microarrays of 3840 genes obtained from neuronal differentiation experiment of cortical stem cells on white mouse with cancer, constructed accurate tumor classification model by extracting informative gene list through normalization separately and then did performance estimation by analyzing and comparing each of the experiment results. Result classifying Multi-Perceptron classifier for selected genes using Pearson correlation coefficient represented the accuracy of 95.6%.

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.87-94
• /
• 2019

This study deals with the reliability analysis approach of the temporary structure that can consider the uncertainty in rotational stiffness at the joints of the members, for which the semi-rigid connections are modelled as rotational spring and its coefficient is treated as a random variable following uniform distribution. In addition, this study introduces a computational procedure of the effective length coefficient for more accurate buckling load according to connection conditions of the supporting members attached to the joint. From the results of this study, it can be seen that the failure probability of the joint-hinge model (Case 1) presented in the design standard is higher than that of the practical model (Case 5) considering the rotational stiffness at the joints. This implies that the design standard leads to a conservative design of the temporary structure. The results also confirmed that the failure probability of the vertical member, i.e., the most critical member, can be further reduced when the base connection is provided with a fixed end. The comparative results between FORM, SORM and MCS further demonstrated that FORM can have a high level of numerical efficiency while ensuring the accuracy of the solution, compared with SORM and MCS. Based on these results, the proposed approach can be used as an accurate and efficient reliability analysis method of the three dimensional temporary structure.

• Korean Journal of Breeding Science
• /
• v.43 no.5
• /
• pp.399-404
• /
• 2011

Genetic diversity among 28 Cymbidium varieties was evaluated by using a sequence-related amplified polymorphism (SRAP) marker system. The SRAP marker which was based on the open reading frames (ORFs) regions was developed primarily for Brassica species, but has been applied to various crops. A total of 30 SRAP primer combinations were initially screened. Twenty-eight SRAP primer combinations showed high polymorphism among the 28 Cymbidium varieties, which were consisted of breeding varieties and their parents in National Institute of Horticultural & Herbal Science (NIHHS). The amplified DNA fragments were separated by denaturing acrylamide gels and detected silver staining method. One hundred ninety six polymorphic bands (7 per primer) were generated and ranged from 0.3 to 1.0 kb in size. Polymorphic fragments were scored for calculating simple matching coefficient of genetic similarity and cluster analysis with multi-variate statistical package (MVSP) 3.1. The mean genetic similarity coefficient value was 0.588. The results showed that the correlation between $F_1$ varieties and their parents was high. These studied SRAP markers will be useful tools for genotype identification, germplasm conservation, genetic relationships in Cymbidium.