• 제목/요약/키워드: code-switching

검색결과 87건 처리시간 0.024초

광 패킷 어드레스 처리기에 EDFA 전치 증폭기를 사용한 광 패킷 교환 노드의 패킷 오율 특성 (Packet Error Rate Characteristics of an Optical Packet Switching Node with an Optical Packet Address Processor Using an EDFA Preamplifier)

  • 윤찬호;백승환;신종덕
    • 한국통신학회논문지
    • /
    • 제23권7호
    • /
    • pp.1777-1784
    • /
    • 1998
  • 광 패킷 어드레스 처리기의 광섬유 지연선로 정합여파기 출력으로 나타나는 M-ary 상관 펄스를 검출하기 위해 EDFA 전치증폭기를 사용한 광 패킷 교환노드의 패킷 오율을 측정하였다. 어드레스 처리기에 사용된 PIN 다이오드의 잡음 등가전력, EDFA의 잡음지수와 이득, 그리고 광여파기의 대역폭이 노드의 패킷 오율에 미치는 영향을 비교 평가하였다. PIN 다이오드의 잡음 등가 전력과 EDFA의 이득은 패킷 오율 변화에 영향을 거의 미치지 않았으며, 통과 대역폭이 패킷 전송 속도의 약 10배 보다 적은 광 여파기를 사용한 경우에도 패킷 오율의 변화를 무시할 수 있었다. 그러나 EDFA의 잡음 지수가 증가하면, 본 논문에서 고려된 모든 전송속도와 어드레스 코드셋에서 잡음지수 증가량만큼 파워 페널티가 발생하였다.

  • PDF

고속 대용량 ATM Switching칩 구현을 위한 MCM기술 적응 (High-Speed, Large-Capacity ATM switching-chip Implemented by MCM Technology)

  • 김남우;허창우;임실묵
    • 한국정보통신학회논문지
    • /
    • 제5권4호
    • /
    • pp.791-797
    • /
    • 2001
  • 본 논문에서는 고속 대용량 ATM교환기에 쓰이는 스위칭소자들 중 서로 관련 있는 두 종류의 칩을 MCM기술을 이용하여 하나의 칩으로 구현하고 그 기능을 검증하였다. MCM은 소형화와 이종간 소자의 결합이 주목적으로 개발된 기술로서 하나의 패키지 상에 다양한 칩들을 실장 함으로써 칩간 지연시간이 시스템 성능향상을 가져오며 고성능화와 소형화가 시스템 개발에 도움으로 주는 기술로 각광을 받고 있는 기술이다. 고속 대용량화를 위해 구현된 MCM 스위칭 칩의 기능 검증을 위하여 기존에 개발된 칩들의 VHDL코드를 가지고 시뮬레이션 모델을 생성하였고, 시뮬레이션을 통해 모델링된 패턴의 입출력 값을 얻었다. 칩 테스트 장비에 패턴 값을 입력하여 시뮬레이션 결과와 비교함으로써 동작성능을 평가하였다. 본 연구에서 실행된 시뮬레이션은 SUN 워크스테이션 상에서 Synopsys툴을 사용하였고, 칩의 기능 시험은 Trillium장비를 사용하였다. 본 연구를 통하여 시뮬레이션을 통해 얻은 결과와 시험장비를 통해 얻은 결과를 비교한 결과 처음에 목적한 패턴의 시험에 대한 기능들이 일치됨을 알았다.

  • PDF

광 스위치를 이용한 광 CDMA 방식에 의한 광 가입자 액세스 망의 제안 (Proposal of optical subscriber access network using optical CDMA method with optical switches)

  • 박상조;김봉규
    • 정보처리학회논문지C
    • /
    • 제10C권3호
    • /
    • pp.317-324
    • /
    • 2003
  • PN 부호와 광 스위치를 사용하여 시간영역에서 확산하는 CDMA 방식에 의한 광 가입자 액세스 망을 제안한다. 무선통신에 널리 사용되는 PN 계열 부호를 사용하여 양극성(bipolar) 데이터를 수신측에서 상관할 수 있는 구조를 제안한다. 광 스위치의 ON/OFF를 통하여 PN 부호를 소프트웨어적으로 구성할 수 있어 광 가입자에 배분할 수 있는 부호계열의 수가 증가 증가하고, 부호 배분에 있어서 유연성을 갖고 있다. 그리고 이론적으로 제안한 광 가입자 액세스 망의 성능을 해석하고 종래의 광섬유 형 정합필터를 이용한 광 CDMA 방식을 적용한 광 가입자 액세스 망에 비하여 성능이 향상됨을 수치 계산을 통하여 명확히 한다.

LTE 하향링크에서 단말의 이동 속도에 따른 적응적 차등 시공간블록부호 복호화 기법 (An Adaptive Detection Scheme of Differential Space-Time Block Codes for Mobiles Operating with Various Speeds in LTE Downlink Scenario)

  • 김득규;황재균;김병길;최병조
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2012년도 추계학술대회
    • /
    • pp.611-614
    • /
    • 2012
  • 시공간 블록 부호화(STBC: Space-Time Block Code) 기법은 단순하면서도 효과적인 다이버시티 기법으로 WCDMA, HSDPA 및 LTE 이동통신 표준에 채택되었다. 이러한 STBC 기법은 페이딩 채널의 추정 정확도에 따라 그 성능이 좌우된다. 채널 추정을 위한 기준 심볼의 오버헤드를 수용할 수 없거나 고속으로 이동하는 모바일의 경우 채널 추정이 힘든 경우가 있다. 이러한 문제를 해결하기 위하여 차등 시공간 블록 부호화(DSTM: Differential Space-Time Modulation) 기법들이 제안되어 왔다. 이 기법들은 채널 추정을 필요로 하지 않기 때문에 위와 같은 고속 이동 환경에 적합한 장점이 있다. 본 논문에서는 다양한 속도로 이동하는 모바일 채널에 LTE 파라미터를 적용하여 기존의 STBC 및 DSTM의 성능을 고찰해 보고, 단말에 적용 가능한 적응적 DSTM 복호 기법을 제안하여 그 성능을 고찰하였다.

  • PDF

펄스형 Jamming 신호가 존재하는 주파수 도약 대역확산 통신환경에서 쇄상부호 시스템의 적응 복호화 방식 (Adaptive Decoding Scheme of Concatenated Codes for Frequency-Hopped Spread-Spectrum Communications with a Pulse-Burst Jamming)

  • 김정곤;김성대;김형명
    • 한국통신학회논문지
    • /
    • 제19권7호
    • /
    • pp.1234-1243
    • /
    • 1994
  • 본 논문에서는 pulse burst jammer가 존재하는 주파수 도약 대역확산 통신 환경하에서 쇄상부호 시스템의 적응 복호화 방식을 제안하고, 그것의 성능을 분석하였다. 쇄상부호 시스템의 내부부호로는 이진 BCH 부호를 사용하였고, 외부부호로는 널리 알려진 리드 솔로몬(Reed-Solomon) 부호를 사용하였다. 본 논문에서 고려된 복호화 방식은 통식채널을 통과할 때 발생하는 일반적인 잡음에 의한 비트오류 뿐만 아니라, Jammer에 대한 side information을 이용하여 발생되는 erasure까지 동시에 정정할 수 있는 복호화 기법을 사용하였으며, 특히 제안된 적응 복호화 방식에서는 가해지는 jamming 신호의 크기에 따라 적응적으로 복호화 방식을 변화시킴으로써 jamming 신호의 변화에 효과적으로 대처할 수 있도록 하였다. 복호화 방식의 성능 평가를 위해 전체 블록 오류 확률이 사용되었으며, 컴퓨터 계산 결과, 제안된 적응 복호화 방식의 성능이 기존의 복호화 방식보다 훨씬 우수함을 볼 수 있다.

  • PDF

High Power Density, High Frequency, and High Voltage Pulse Transformer

  • Kim, S.C.;Jeong, S.H.;Nam, S.H.
    • KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
    • /
    • 제11B권4호
    • /
    • pp.180-184
    • /
    • 2001
  • The high operation frequency mainly reduces transformer volume in the power supply. A high frequency and high voltage pulse transformer is designed, fabricated, and tested. Switching frequency of the transformer is 100 kHz. Input and output voltages of the transformer are 250 V and 4 kV, respectively. Normal operation power of the transformer is 3 kW. Maximum volume of the transformer is 400 $cm^3$. The power density is thus 7.5 W/$cm^3$. The transformer will be installed in a metal box that has nominal operation temperature of 85 degree centigrade. The transformer and other high voltage components in the box will be molded with Silicon RTV(Room Temperature Vulcaniza) that has a very low thermal conductivity. Procedure of design and test results are discussed. Analytical as well as experimental results of varous paramters such as transformer loss, leakage inductance, distributed capacitance are also discussed. In addition, thermal analysis results from ANSYS code for three different operation conditions are discussed.

  • PDF

가역 전력변환기의 인버터 설계 (A Inverter Design of Reversible Power Converter)

  • 전중함;이현우;백수현;곽동걸
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2005년도 춘계학술대회논문집
    • /
    • pp.8-13
    • /
    • 2005
  • In this paper discusses single-phase DC-AC Inverter design of reversible power converter that driven by binary combination at different transformer winding ratio by BCD code level. It has a advantage that constructs a control system simply and obtain load current of good quality without filter circuit and free from noise or isolation for lower switching frequency. In this research, study on current type converter and inverter circuit that consist for possibility of AC-DC/DC-AC multi-level reversible converter.

  • PDF

육각형의 셀배치를 가지는 CDMA 이동통신 시스템에서 MSC 간의 소프트 핸드오프를 위한 성능분석 (Performance Analysis for CDMA Soft Handoffs between MSC's under Hexagonal Configuration)

  • 최우용;전치혁
    • 대한산업공학회지
    • /
    • 제30권4호
    • /
    • pp.277-284
    • /
    • 2004
  • CDMA (Code Division Multiple Access) is a promising air interface technique for digital cellular systems. The soft handoff between base stations is one of many important features of CDMA for the mobile stations crossing the cell boundaries. The service areas of MSC's (Mobile Switching Centers) are defined as the unions of the service areas of the base stations connected to MSC's and are assumed to have hexagonal shapes. An analytical approach to the performance analysis of the link between MSC's for supporting the inter-MSC soft handoff scheme will be developed to obtain the probability that a soft handoff to an adjacent MSC will be blocked due to the shortage of the link capacity. Also, the rate of new connection establishments that are requested by the mobile stations moving to the service area of an MSC according to the inter-MSC soft handoff scheme will be obtained.

network engineering issues in the UMTS development perspective

  • Giovanni Colombo;Magnani, Nicola-Pio;Giuseppe Minerva;Enrico Scarrone
    • Journal of Communications and Networks
    • /
    • 제2권1호
    • /
    • pp.18-34
    • /
    • 2000
  • The evolution of mobile communications is inducting several new issues belonging to the system engineering disciplines. this paper tires to underline some of the most important problems staring room the novel requirements and the application characteristics expected for Third Generation Mobile System. Based on these new service peculiarities. the radio resource control and the architectural solutions to be chosen for the Mobile core network are becoming key issues to be investigated for the forthcoming configurations. Particularly. the service acceptance control and the perspective of integration with the IP (internet Protocol) context are of great importance for the definition of the radio control functions and the specification of the switching and nobility control features respectively.The paper presents some basic considerations on the cellular planning issues arising in W-CDMA ( wideband -code division Multiple access) systems. by underlying the most significant innovative elements that are to be introduced in the planning process form the mobile operator viewpoint..

  • PDF

보조선을 사용하지 않은 Sequence Switch Coding 회로의 설계 (Design of A Sequence Switch Coding Circuit Without Using Auxiliary Lines)

  • 윤명철
    • 대한전자공학회논문지SD
    • /
    • 제46권11호
    • /
    • pp.24-33
    • /
    • 2009
  • 코딩정보의 전송을 위하여 보조선에서 발생하는 오버헤드전이는 Sequence Switching Code (SSC) 알고리즘의 확장성을 제한하는 가장 큰 걸림돌이 되어왔다. 본 논문에서는 보조선을 사용하지 않고 SSC 회로를 구현하는 방법과 함께 이 방법을 사용하여 보조선을 사용하였을 때 보다 오버헤드전이를 적게 발생시키는 방법을 제시하였다. 실험결과 새로운 방법을 적용함으로써 보조선을 사용하는 방식에 비하여 오버헤드전이의 발생을 50% 이하로 줄이고 알고리즘의 효율을 약 30% 향상시킬 수 있었다.