• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.1
• /
• pp.13-18
• /
• 1999

To fabricate a 0.7 FJ, 100 kVA $\mu$SMES device for improving power quality in sensitive electric loads, we developed a design code for a $\mu$SMES device and designed the 0.7 MJ $\mu$SMES device by using it. In this study special emphasis was placed in influence of winding tensions on quench currents of superconducting coils because dry superconducting coils are usually quenched by local disturbances due to strand motions. We first investigated the quench currents of a few kA class superconducting cables for various winding tensions experimentally. To prove the validity of the code and develop all techniques related to fabrication and test of the 0.7 MJ $\mu$SMES device, a smaller size superconducting coil was wound with high winding tension of about 15 kgf/$mm^2$ based on the test results of superconducting cables and tested. It isshown form the test results that designed parameters for the smaller size superconducting coil are in good agreements with measured ones and the quench current of the coil with high winding tension reaches nearly to the critical current of the superconducting cable without any training effects.

• Nuclear Engineering and Technology
• /
• v.36 no.4
• /
• pp.338-345
• /
• 2004

This study examines the sensitivity of several fabrication parameters for dry process fuel, using a random sampling technique. The in-pile performance of dry process fuel with irradiation was calculated by a modified ELESTRES code, which is the CANDU fuel performance code system. The performance of the fuel rod was then analyzed using a Monte Carlo simulation to obtain the uncertainty of the major outputs, such as the fuel centerline temperature, the fission gas pressure, and the plastic strain. It was proved by statistical analysis that for both the dry process fuel and the $UO_2$ fuel, pellet density is one of the most sensitive parameters, but as for the fission gas pressure, the density of the $UO_2$ fuel exhibits insensitive behavior compared to that of the dry process fuel. The grain size of the dry process fuel is insensitive to the fission gas pressure, while the grain size of the $UO_2$ fuel is correlative to the fission gas pressure. From the calculation with a typical CANDU reactor power envelop, the centerline temperature, fission gas pressure, and plastic strain of the dry process fuel are higher than those of the $UO_2$ fuel.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.2
• /
• pp.1-11
• /
• 1997

We developed a base station modulator ASIC for CDMA digital cellular system. In CDMA digital cellular system, the modulation is performed by convolutional encoding and QPSK with spread spectrum. The function blocks of base station modulator are CRC, convolutional encoder, interleaver pseudo-moise scrambler, power control bit puncturing, walsh cover, QPSK, gain controller, combiner and multiplexer. Each function block was designed by the logic synthesis of VHDL codes. The VHDL code was described at register transfer level and the size of code is about 8,000 lines. The circuit simulation and logic simulation were performed by COMPASS tools. The chip (ES-C2212B CMB) contains 25,205 gates and 3 Kbit SRAM, and its chip size is 5.25 mm * 5,45 mm in 0.8 mm CMOS cell-based design technology. It is packaged in 68 pin PLCC and the power dissipation at 10MHz is 300 mW at 5V. The ASIC has been fully tested and successfully working on the CDMA base station system.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2
• /
• pp.536-541
• /
• 2000

Turbo code has excellent decoding performance but had limitations for real time communications because of the system complexity and time delay in decoding procedure. To overcome this problem, a new SRI(Semi-Random Interleaver) algorithm which realize the reduction of the interleaver size is proposed for reducing the time delay during the decoding prodedure. SRI compose the interleaver 0.5 size from the input data sequence. In writing the interleaver, data is recorded by row such as block interleaver. But, in reading, data is read by randomly and the text data is located by the just address simultaneously. Therefore, the processing time of with the preexisting method such as block, helical random interleaver.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1977-1985
• /
• 2007

The character recognition technique is one of the artificial intelligence and has been widely applied in the automated system robot HCI(Human Computer Interaction), etc. This paper introduces the character set and the representative character that can be used in the recognition of the mage ROI. The character codes in this ROI include the digit, symbol, English and Hereat etc. We proposed the efficient multi-classifier structure by combining the small-size classifiers hierarchically. Moreover, we generated each small-size classifiers by delta-bar-delta learning algorithm. We tested the performance with various kinds of images and achieved the accuracy of 99%. The proposed multi-classifier showed the efficiency and the reliability for the mixed character code set.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1134-1145
• /
• 2021

A design parameter study is presented for the closed-loop type passive containment cooling system (PCCS) which is equipped with two heat exchangers: one installed at the inside of the containment and the other submerged in the water pool at the outside of the containment. A GOTHIC code model for PCCS performance analyses was set up and the design parameters such as the heat exchanger sizes, locations, and water pool tank volumes were analyzed to investigate the feasibility of installing this type of PCCS in PWRs like OPR-1000 being operated in Korea. We identified the size of the circulation loop and heat exchangers as major design parameters affecting the performance of PCCS. The analyses showed that the heat exchangers in the inside of the containment would be more influential on the heat removal capability of PCCS than that installed in the water pool at the outside of the containment. Hence, it was recommended to down-size the heat exchangers in the water pool to optimize PCCS without compromising its performance. Based on the parametric study, it was demonstrated that a closed-loop type PCCS could be designed sufficiently compact for installation in the available space within the containment of PWRs like OPR-1000.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2349-2354
• /
• 2014

While the number of smart phone subscribers excessing 30 million people, Korea is leaping into the 'smart powerhouse' from IT powerhouse. The popularizat+ion of smart devices so called 'PC in the hand', brought surely change to people's life style, and also it had led to a revolutionary change to and also to business and government. In several corporations of each countries, a variety of smart devices smart devices such as smart phone, tablet PC and E-books have been developing. Nowadays, the usage of the smart phone is not only the simple function calling. It has become a culture of the terminal type in the hand anywhere at any time, which makes can communicate with the others in anywhere and anytime. However, some of the subscribers who visit the website for PC version with the mobile devices screen, can feel kind of discomfort while surfing the net on a smartphone devices because the install of the existing video and flash files and the screen size for computer is not available for mobile devices. Therefore, in this paper, we studied on effective mobile contents generation program using QR code that is two dimensions bar code under the smart device environment. Also, unlike previous QR code generator that decorate standardized design, we realize an original QR code generation system from user perspective.

• 전자공학회논문지 IE
• /
• v.44 no.3
• /
• pp.23-34
• /
• 2007

For an effective phase multiplexing in a volume holographic system, four types of phase code, pseudo random code(PSC), Hadamard matrix(HAM), pure random code(PRC), equivalent random code(ERC), used as reference beams are generated. In case of $32{\times}32$ address beam, a phase error with 0%, 5%, 10%, 15%, 20%, and 25% error rate, is purposely added to the real phase values in order to consider the practical SLM's nonlinear characteristics of phase modulation in computer simulation. Crosstalks and SNRs(signal-to-ratio) are comparatively analyzed for these phase codes by the auto-correlation and cross-correlation. PSC has the lowest cross-correlation mean value of 0.067 among four types of phase code, which means the SNR of the pseudo random phase code is higher than other phase codes. Also, the standard deviation of the pseudo random phase code indicating the degree of recalled data degradation is the lowest value of 0.0113. In order to analyze the affect by variation of pixel size, simulation is carried out by same method for the case of $32{\times}32$, $64{\times}64$, $128{\times}128$, $256{\times}256$ address beams.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1181-1188
• /
• 2007

This paper presents the measured signal performances in the urban environment for the DVB-H parameters such as code rate, burst size, FFT mode and modulation technique to analyze the DVB-H signal performance avaible for the embodiment of single frequency network to improve the frequency efficiency. Measurements were performed for the case for applying and non-applying MPE-FEC technique simultaneously. Results show that the most outstanding performance are found in the case of QPSK modulation, 1/2 code rate, 2 k FFT mode and 512 burst size. In addition, the signal performance by the SFN with 1/8 guard interval becomes superiour in comparision with the measured data from each site and the data from SFN with 1/32 guard interval. The analysis of the results can be instructive for the improvement of the signal performance and broadcasting quality for the terrestrial digital mobile broadcasting service.

• Journal of IKEEE
• /
• v.15 no.3
• /
• pp.241-247
• /
• 2011

In this paper, it was implemented an algorithm of multimedia fingerprinting in DCT block. For the improvement of the limits of DRM’s ability, the proposed algorithm could be decided a responsibility boundary to judge a traitor who falsified the content according to perform separately a watermarking of content provider and a fingerprinting of content user. At the test image size($128{\times}128$) and block size($8{\times}8$) of the content provider, the measured PSNR is Inf~46.6dB with watermarking strength ${\Theta}=0.5{\sim}1.2$, and at a number of users and user's code length are n=7,15,31,63 and l=7,15,31,64 each, the measured PSNR is Inf~46.1 with fingerprinting code length l=7,15,31,63. Finally, a traitor tracing of the falsified content is approached to a trace ratio 1 which is extended to n-1.