• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.267-269
• /
• 1996

In this work, the influence of wire type conducting particles on the insulation reliability of GIS has been systematically investigated when outer electrode was dielectric coated by epoxy resin. For this purpose, coaxial cylinder-type electrode was adopted in 362 kV chamber and various size of Cu conducting particle was used and different gas pressure was applied. To prove the coating effect on the gas insulation, different thickness of epoxy coated outer electrode have been considered and the lift-off voltage and flashover voltage have been analyzed. The results show that the dielectric coated electrode has an remarkable influence on the reducing particle behavior in GIS system and enhancing the GIS insulation reliability.

• Journal of the Korean Society of Combustion
• /
• v.6 no.1
• /
• pp.36-43
• /
• 2001

The NOx emission characteristics of jet flames fueled with $H_2\;and\;CH_4$ were studied. Experimental and numerical investigations were carried out for various flames with varying equivalence ratio, fuel flow rate and nozzle diameter. The Emission indices of NOx(EINOx) were measured by chemiluminescent method and calculated by numerical model based on detailed chemistry. The results show that EINOx of $CH_4\;and\;H_2$ flames have different trends in terms of equivalence ratio and fuel flow rate but have the same trends in terms of nozzle diameter. These differences can be explained by the following Thermal and Prompt trends in both flames. Thermal EINOx is quite sensitive to the residence time in the high-temperature region weighted by the maximum flame temperature. Prompt EINOx is mainly influenced by flame surface area of each combustion conditions.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.107-108
• /
• 2015

The acoustic optimization of a swirl coaxial jet injector mounted upstream a combustion chamber is investigated to tackle combustion instabilities. The least damped modes are extracted with the help of the dynamic mode decomposition (DMD). The sensitivity of the heat release perturbation to the velocity perturbation for the second longitudinal mode is investigated by combining the Crocco's equation and the inhomogeneous wave equation and computing the flame transfer function (FTF). DMD and FTF results agree in terms of the optimized injector length.

• Bulletin of the Korean Space Science Society
• /
• 1993.10a
• /
• pp.22-22
• /
• 1993

We developed the low energy electron detector (LEED) for KITSAT-B which was launched on September 26, 1998. The sensor head is mounted on the top of the satellite so that it can measure the precipitating electron flux along the Magnetic field line in the auroral zone at 820 km altitude. The detector system is composed of 4 parts : the electrostatic analyzer, the spira10on detector, the discriminator / Preamplifier, and the interface to the spacecraft. The analyzer limits the access to the spiraltron only to the electrons of certain energies which are determined by the electrostatic field across the two coaxial cylindrical analyzer plates. The energy spectrum of the detector in consideration is about 100 eV to 6.7 KeV, which is swept in 1.6 seconds and divided into 16 bins. It 81so is 1.6 second reset period after each swept, We will discuss the technical features of the system as well as the future observational schedule.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.103-105
• /
• 2003

The principle of the ultra-high frequency (UHF) method to detect partial discharge(PD) in GIS is to measure the UHF electromagnetic waves excited by PD pulses. Such electromagnetic waves propagate along the GIS busbar in the TEM-mode, TE-mode, TM-mode. And the coaxial busbar of the GIS acts as a waveguide in which the UHF electromagnetic waves travel. This paper was studied the analysis on damping characteristic of electromagnetic waves excited by PD in GIS and presented the method to yield the cutoff frequency for determine the minimum band of sensor that detect the PD pulse.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.458-459
• /
• 2012

본 논문에서는 산업장비 및 전자기기의 전원회로에 폭넓게 사용되는 플라이백 컨버터의 변압기를 기존 샌드위치 권선방식의 변압기가 아닌 동축 변압기를 사용하여 다출력 플라이백의 출력전압 변동을 최소화 하는 방법을 제안한다. 제안된 방법의 동축 변압기는 1,2차 측 커플링이 기존의 샌드위치권선 변압기 보다 우수하여 누설 인덕턴스를 최소화 할 수 있으며 이에 따라 부하 변동에 따른 출력전압의 변동을 최소화 할 수 있다. 본 논문에서는 45W급 플라이백 컨버터를 제작하여 동축변압기를 통한 개선된 다출력 플라이백 컨버터의 출력전압 변동특성을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.460-461
• /
• 2012

플라이백 컨버터는 SMPS의 전원회로 중 가장 많이 쓰이고 있는 컨버터이다. 최근 들어 원가 절감을 위한 Primary Side Regulation(이하 PSR)기술이 활발히 진행 중이다. 이 기술의 단점 중 하나는 직접적으로 제어하는 전압이 출력전압이 아니라 보조권선 전압이므로 변압기 커플링에 따라 실제출력전압에 약간의 오차가 생길 수도 있다는 것이다. 본 논문은 이를 감안하여 플라이백 컨버터의 트랜스포머를 기존의 방식들이 아닌 동축권선 방식을 적용하여 만듦으로써 보다 우수한 커플링으로 인해 출력전압의 오차가 거의 없음을 보여준다. 간단한 PSR의 원리에 대해 설명하고 커플링 계수를 비교한 후 UC3844를 이용한 Flyback converter를 이용하여 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.353-354
• /
• 2012

본 논문은 동축권선 변압기를 이용한 승압형 플라이백 컨버터에 절연형 스위치드 커패시터 셀을 추가한 새로운 토폴로지를 제안한다. 제안하는 회로는 절연형 스위치드 커패시터 셀의 출력과 플라이백의 출력을 직렬 연결하여 고승압에 유리하고 스위치 온타임과 스위치 오프타임 모두 전력을 전달하여 기존의 플라이백 컨버터보다 향상된 변압기의 이용률을 가진다. 제안된 회로의 동작원리를 설명하고 60W급 하드웨어 프로토 타입을 이용하여 검증하였다.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.284-286
• /
• 1994

This paper describes the dielectric characteristics of $SF_6$ gas in non-uniform electric filed under lightning under lightning impulse and oscillating impulse voltages. The breakdown voltage-time characteristics and the breakdown voltage-pressure characteristics are measured over a pressure range extending from 0.1 to 0.5 [MPa] fur the coaxial electrode with a needle protrusion. The curvature radius of needle protrusion is 0.3[mm]. Also, the growth of the predischarge is simultaneously observed. As a result the polarity effect is pronounced, and the breakdowns voltage under the oscillating impulse voltage are higher than those under the lightning impulse voltage. It is found that the breakdown mechanism md predischarge phenomena ate closely related with the polarity and waveforms of the testing voltage.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1457-1458
• /
• 2007

본 논문은 전기에너지의 안정적인 공급을 위한 가스절연개폐장치(Gas Insulated Switchgear; GIS)의 안정성과 신뢰성을 확립하기 위해 GIS 내부 결함에 의한 사고의 발생을 미리 진단하는 절연진단용 UHF 대역($0.5\;{\sim}\;1.5$ GHz) 동축형 밸런 부착 안테나를 제안하였다. 동축형 밸런이 부착된 안테나를 GIS에 장착하였을 때 반사계수의 주파수특성을 실험치와 비교 검토하였다.