• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.79-86
• /
• 2010

In this paper, using soil slope inclinometer observations of lateral flow is used as a traditional way, but there are some decisions. Inclinometers in the process of installing and monitoring is costly. Severe incline slope of the lateral flow is observed in the inefficient. As a solution for it using TDR sensors are used to. Metal conductors such as coaxial cable and general cable uses a measurement sensor can be installed on site at a lower cost and slope measurements are available for long-term monitoring. When TDR sensor is installed on the slopes, changes in the behavior of slopes causes the earth pressure. TDR sensors determine the change of earth pressure and tried to analyze the behavior of slopes.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.5-6
• /
• 2011

자계 공진(Magnetic resonance)을 이용한 무선전력전송을 위해 새로운 형태의 동축형 구조를 가지는 자기 공진 코일(Self-Resonant Coil)을 제안한다. 코일은 헬리컬 코일과 동축형 커패시터로 구성된다. 공진 주파수를 조정하기 위해 동축 구조는 병렬로 연결하고, 코일의 Q-factor를 높이기 위해 리츠 코일을 병렬로 연결하였다. 제안된 자기 공진 코일은 소형으로 제작이 가능하며, 우수한 전력전송특성을 가진다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.4
• /
• pp.113-123
• /
• 2003

Both numerical analysis and experiment of cold and hot tests were performed to obtain basic design data for the swirl coaxial type Injector and to predict the combustion performance. Mass distribution, mixing distribution, mixing efficiency, characteristic velocity efficiency were measured by the cold tests and numerical analysis using the commercial thermo-hydraulic program. Test and analysis variables were recess, pressure drop, velocity ratio, mixing spray, mixture ratio. Hot tests were performed for the Uni-element injector to compare the performance with the cold test results, and, hot tests for Multi-element injector were performed to compare the performance with Uni-element injector. Designed thrust of the Uni-element injector liquid rocket was 35kgf at sea level and combustion chamber pressure, 20bar. Kerosene and Lox were used as a propellant.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.12
• /
• pp.1228-1235
• /
• 2014

Input impedance of UHF RFID tag chip is needed to design a tag. In determining the chip impedance, direct measurement method is adopted commonly. In this paper, problems generated from fixtures that interface between tag chip and coaxial-oriented measurement instrument are investigated and the result of the problems is shown, when the direct measurement method is applied. As an alternative to the method, a modeling method is proposed and its validity and accuracy are shown.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.10
• /
• pp.1477-1482
• /
• 2012

This paper deals with a new variable microwave power distributor and a connector between a deck plate and a input power waveguide for indoor microwave wireless power transmission. We design a new type connector built in the 3-stage coaxial line structure, and calculate the return loss of the connector at 2.45GHz. Newly designed connector shows the excellent return loss performance less than -30dB at the operating frequency of 2.45GHz. And we show a power distributor in which the dividing ratio of the power is controlled mechanically by three rotary fins. The distributor can control the dividing power from 4.5% to 58% with the variance of 5% output power. The experimentally tested results of the distributor are good agreement with the simulation within the return loss of 1%.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.2011-2014
• /
• 2008

We measured the permittivity and electromagnetic wave propagation velocity of used insulation oil with wide frequency range including ultra-high frequency by time domain reflectometry. The permittivity or propagation velocity is essential for locating discharge faults of oil filled power transformer. We derived 2.21 as a permittivity and $2.03{\times}10^8 m/s$ as a velocity from the measurement of pulse travelling time along a coaxial line filled with used insulation oil or air. The permittivity measurement system we designed shows high measurement accuracy and the convenience for field use.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.331-335
• /
• 2007

방송과 초고속인터넷 서비스를 동시에 제공할 수 있는 HFC(Hybrid Fiber Coaxial) 망은 상/하향이 비대칭 구조이며, 하향속도에 비해 상향속도가 1/10 수준이어서 상향 트래픽이 과다하게 생성될 경우 인터넷속도 지연이 발생한다. 지연에 민감한 VoIP 서비스의 품질보장 방안으로는, DOCSIS(Data Over Cable System Interface Specification) 1.1 기반의 상향 스케쥴링 기능을 이 용한 VoCM(Voice Over Cable Modem)이 있다. 그러나 별도의 VoCM을 사용해야 하며 아날로그 전화기를 사용해 IP 기반의 VoIP 단말을 사용할 수 없다는 단점이 있다. 일반 CM(Cable Modem)에 DOCSIS 1.1 Config File을 이용하여 VoIP 품질을 보장할 경우 별도의 트래픽 대역을 항상 점유해야 하는 단점이 있다. 이에, 본 논문에서는 효율적 대역폭 이용과 단말장비에 종속적이지 않은 방안을 제안하고 일반 CM을 통한 유무선 환경하에서 Dynamic QoS(Quality Of Service)를 제공할 수 있는 PCMM(Packet Cable MultiMedia) 적용 방안 및 시험결과에 대해 고찰하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.179-182
• /
• 2003

A simulation on bootstrapping circuit has been performed by modelling a coaxial cable as a transmission line. It is shown that the bootstrapping circuit could be unstable due to the transmission line effect though an ideal amplifier is used. While the conventional bootstrapping circuit does not cancel the input capacitance of the input buffer, a new bootstrapping circuit that cancels input capacitance of the input buffer has been proposed. The proposed bootstrapping circuit consists of the input buffer of which gam is larger than 1 and a feedback resistor to control the loop gain. The proposed bootstrapping circuit has higher input impedance than that of the conventional circuit.

• Composites Research
• /
• v.14 no.6
• /
• pp.38-46
• /
• 2001

In this study, An optimization code that can design microwave absorbing composite laminates is developed, and 3-layered microwave absorbing composite laminates are developed by optimizing the thickness of each layer. The layers are 3 different composite laminates. Many variables including lay-up angles of electromagnetically orthotropic composite layer can be considered in this code. The developed laminate is composed of an impedance matching layer of glass/epoxy fabric laminate, a glass/epoxy fabric laminate layer containing aluminum filler and carbon/epoxy fabric laminate layer. Permittivities of the materials are obtained using a network analyzer and a coaxial air line.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.29-32
• /
• 2003

The UWB UHF coupler for GIS PD detection needs a balun(balance to unbalance transformer) to show its inherent UWB characteristics. In order to reduce the size of the balun and to make it practical in the conventional GIS, a novel tapered coaxial balun with a dielectric was proposed for the UWB UEIF coupler. The performance of the proposed balun was verified through a series of simulations, measurement and experiments. As results, both the conventional balun and the proposed balun of which length is one third of that of the conventional one showed good S11 characteristics, whereas the efficiency of the proposed balun increased as much as about 30% in comparison with the conventional one.