• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.1035-1040
• /
• 2011

본 논문은 세라믹과 금속파우더를 이용한 복합소재를 플라즈마 용사 방식으로 개발한 결과를 수록하였다. 사용된 세라믹 파우더는 $Al_2O_3+40TiO_2$ 이고 입자 크기는 $20{\mu}m$, $Al_2O_398+$파우더의 입자 크기는 $45{\mu}m$를 사용하였다. $20{\mu}m$, $30{\mu}m$ 및 $50{\mu}m$ 금속필터 입자는 SIKA-R 20IS, 30IS 및 50IS(소결금속필터)을 사용 했으며, $75{\mu}m$ 금속필터 입자는 5 겹 소결메쉬 필터를 사용��다. 용사 공정으로 가공된 복합 필터는 세라믹 파우더의 종류, 크기 및 코팅 두께에 따라 성능의 차이를 보였으나, 전반적으로 필터링 가능 능력은 향상되었다.

• 한국재료학회지
• /
• 제25권1호
• /
• pp.27-31
• /
• 2015

This paper proposes a novel way of fabricating aligned porous Sn by freeze-drying of camphene slurry with stannic oxide ($SnO_2$) coated Sn powders. The $SnO_2$ coated Sn powders were prepared by surface oxidation of the initial and ball-milled Sn powders, as well as heat treatment of tin chloride coated Cu powders. Camphene slurries with 10 vol% solid powders were prepared by mixing at $50^{\circ}C$ with a small amount of oligomeric polyester dispersant. Freezing the slurry was done in a Teflon cylinder attached to a copper bottom plate cooled at $-25^{\circ}C$. Improved dispersion stability of camphene slurry and the homogeneous frozen body was achieved using the oxidized Sn powder at $670^{\circ}C$ in air after ball milling. The porous Sn specimen, prepared by freeze-drying of the camphene slurry with oxidized Sn powder from the heat-treated Sn/tin chloride mixture and sintering at $1100^{\circ}C$ for 1 h in a hydrogen atmosphere, showed large pores of about $200{\mu}m$, which were aligned parallel to the camphene growth direction, and small pores in their internal walls. However, $100{\mu}m$ spherical particles were observed in the bottom part of the specimen due to the melting of the Sn powder during sintering of the green compact.

• 한국표면공학회지
• /
• 제54권3호
• /
• pp.144-151
• /
• 2021

In the present work, planar-type ZnO powder of [0001] plane with a high aspect ratio range of 20:1 to 50:1 was synthesized. Ag or CuO could be coated on the planar-type ZnO powder by wet methods such as centrifugation or ball milling. During the coating, the average size of the powder was slightly increased while maintaining the shape and XRD pattern of ZnO. When Ag or CuO was coated, the absolute value of the zeta potential, as well as the concentration of oxygen vacancy, was increased. Ag or CuO coated planar-type ZnO power exhibited excellent antibacterial performance, which seems to be related to their high electrostatic attraction force. They could be made into a masterbatch by mixing with ABS resin, and their applicability to antibacterial substances was confirmed by manufacturing the caps of a keyboard.

• 대한화장품학회지
• /
• 제47권1호
• /
• pp.31-40
• /
• 2021

프레스드 파우더의 주요 안정성 요인으로 경도와 낙하 안정도가 있다. 일반적으로 탈크가 포함된 프레스드 파우더의 경우 경도와 낙하 안정도를 고르게 충족시키며 사용감도 우수하지만 최근 탈크의 석면 이슈로 인해 대체를 원하는 고객들이 늘고 있다. 따라서 안정성을 유지하면서 사용감도 떨어지지 않는 탈크 프리 프레스드 파우더 제형의 개발이 시급하다. 본 연구에서는 탈크 프리 프레스드 파우더를 만들기 위한 최적의 원료 배합 비율을 찾기 위한 실험을 진행하였다. 파우더에 주로 사용되는 원료들의 특성을 확인하고 비율을 변화시켜 실험하여 명도와 경도를 측정하고 낙하 시험을 실시하였다. 천연 마이카 함량이 합성 마이카보다 많거나, 코팅된 실리카 대신 논 코팅 실리카를 사용할 경우 탈크가 포함된 내용물보다 경도와 낙하 안정도는 낮지만 명도는 유사하였다. 반대로 합성 마이카 함량이 천연 마이카 함량과 동일하거나 높을 경우, 코팅된 실리카 함량이 논코팅 실리카 함량과 동일하거나 높은 경우에 탈크가 포함된 내용물의 경도, 낙하 안정도와는 유사하였으나 명도는 낮게 측정되었다. 탈크가 포함된 내용물보다 경도는 높지만 낙하 안정성은 떨어지는 현상도 발견하여 경도와 낙하 안정성의 상관관계에 대해서는 추가적인 연구가 필요할 것으로 생각된다.

• 한국분말재료학회지
• /
• 제18권6호
• /
• pp.526-531
• /
• 2011

Fecralloy is the promising materials for high temperature exhaust filtering system due to the excellent its oxidation resistance property. In this research, Fecralloy nanoparticles coated Fecralloy thin foil was prepared by a single nozzle electrospray system in order to increase surface area of Fecralloy foil. Fecralloy nanoparticles were fabricated by electrical wire explosion method in ethanol using Fecralloy wires as a source material. Electrospray modes with applied D.C voltages to Fecralloy colloidal solution were investigated to make a stable cone-jet mode. Coated layers with and without additional heat treatment were observed by FE-SEM (field emission-scanning electron microscope) and tape test for evaluating their adhesion to substrate were performed as well.

• 한국응용과학기술학회지
• /
• 제25권4호
• /
• pp.511-517
• /
• 2008

We make high-functional inorganic-composite pearlescent pigment material that coated with carmine on the plate-type particle such as mica. In this experiment, we synthesized composite powder using pH control precipitation method. We make an experiment with changing as synthesis factors that are concentrations of starting material and precipitation materials. We analyzed pearlescent powder's shape, and crystallization with FE-SEM, XRD, and EDS. Optimum condition for preparation of carmine coated mica pearlescent pigment is pH $4.5{\sim}5.5$.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.203-206
• /
• 2004

Copper-based bulk amorphous alloy composite was synthesized by using the copper-coated $Cu_{54}Ni_{6}Zr_{22}Ti_{18}$ amorphous powder which was obtained by argon gas atomization. The amorphous powder having a super-cooled liquid region of 53 K was coated by crystalline copper by electroless coating. The consolidation was carried out by manufacturing performs and by the subsequent warm extrusion at 743 K. During the compression test at the room temperature, the composite containing a large fraction of crystalline copper displayed a larger plastic strain after yielding. FEM simulation revealed change in fracture modes in the composites depending on the amount of crystalline copper in the composites.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.24-26
• /
• 2003

We fabricated Ni and Ni alloy substrates for YBCO coated conductors. The Ni and Ni alloy substrate was fabricated by powder metallurgy technique and cold rolling. The texture of substrates had a strong 4-fold symmetry and ［111］∥ND texture after annealing temperature of 100$0^{\circ}C$. The measured full-width half-maximum (FWHM) of in-plane and out-of-plane was in the range of 6$^{\circ}$-10$^{\circ}$. The powder metallurgy technique is fabrication of the substrates for considered to be suitable for the application of YBCO coated conductors.

• 현장농수산연구지
• /
• 제13권1호
• /
• pp.27-33
• /
• 2011

코팅소재별 벼 종자의 발아 및 입묘 특성을 구명하기 위하여 무처리, 규산코팅, 철분코팅, 규산복토 처리에서 유묘의 입모율, 경시적 입묘양상의 변화, 초장, 엽수, 생체중의 특성을 조사결과를 요약하면 다음과 같다. 1. 입모율은 무처리 95% 규산코팅 및 규산복토 92%, 철분코팅 77%로 각가 나타나 무처리에서 가장 높게 나타났지만 일반적으로 각종 제한요인(새 피해, 건조, 부묘현상 등)이 많은 포장조건에서는 무처리 조건이 상반된 결과가 나타나고 있으며 규산코팅 또는 복토조건에서 철분코팅보다 높은 입묘율을 보였다. 2. 벼 유묘의 초장에서는 무처리 11.4cm 규산코팅 10.8cm, 규산복토 8.8cm, 철분코팅 6.9cm으로 각각 나타났다. 3. 유묘의 생체중은 지상부의 경우 무처리 50mg, 규산코팅 및 규산복토 40mg, 철분코팅 30mg이었으며, 지하부의 경우 규산코팅 및 규산복토 20mg, 무처리 및 철분코팅 10mg으로 각각 나타났다.

• 한국전기전자재료학회논문지
• /
• 제16권10호
• /
• pp.938-945
• /
• 2003

We fabricated Ni-substrate for YBCO coated conductors and evaluated the effects of pressing and annealing temperature and time on texture. Ni substrate was fabricated by powder metallurgy technique and compacts were prepared by applying uniaxial or isostatic pressure. The texture of substrate made by applying cold isostatic pressure (CIP) was stronger than that by uniaxial pressure which we attribute to the fact that the CIP method provided higher density and more uniform density distribution. It was observed that the substrate annealed at 400 C showed both retained texture and recrystallized texture. On the other hand, the texture of substrate significantly improved at annealing temperature above 500 C, forming strong 4-fold symmetry, [111] II ND texture, and FWHM of 9∼10 . It is to be noted that the degree of texture was almost independent of annealing temperature (500∼1000 C) and annealing time(1∼54 min, at 1000 C). EBSD and AFM analysis indicated that 99% of grain boundaries was low angle grain boundary and RMS was approximately 3 nm, respectively. Development of strong cube texture and high fraction of low angle grain boundary of Ni-substrate made by powder metallurgy technique in our study is considered to be suitable for the application of YBCO coated conductors.