• 대한화학회지
• /
• 제56권5호
• /
• pp.563-570
• /
• 2012

Solid acid Mo(VI)/$ZrO_2$ with 2-10% Mo(VI) was coated on honeycomb monoliths by impregnation method. These catalytic materials were characterized by BET, $NH_3$-TPD/n-butylamine back titration, PXRD and SEM techniques. Phenyl salicylate (Salol) was synthesized via transesterification of methyl salicylate and phenol over these catalytic materials. An excellent yield (91.0%) of salol was obtained under specific reaction conditions. The effect of poisoning of acid sites of the catalytic material by adsorbing different bases and its effect on total surface acidity, powder XRD phases and catalytic activity was studied. A triangular correlation between the surface acidity, powder XRD phases and catalytic activity of Mo(VI)/$ZrO_2$ was observed. The thermally regenerated catalytic material was reused repeatedly with a consistent high yield of salol.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.216-220
• /
• 1994

Polycrystalline CdS films have been prepared by coating a slurry, which consisted of CdS, 11w% CdCl$_2$ and appropriate amount of propylene glycol, on glass substrate and glass substrate coated with indium tin oxide(ITO) followed by sintering in a nitrogen atmosphere. CdTe slurries consisting of Te powder and Cd powder were coated on the sintered CdS films and ITO/CdS films and were sintered in nitrogen to prepare sintered CdS/CdTe and ITO/CdS/CdTe solar cells. The value of fill factor increased due to low series resistance and open circuit voltage decreased due to low shunt resistance in the ITO/CdS/CdTe solar cells.

• 소성∙가공
• /
• 제28권2호
• /
• pp.77-82
• /
• 2019

Corrosion occurs well on surface of roll formed and Zn alloy subsequently electro-deposited on steel bolt under wet condition. In this study, variations in corrosion resistance were investigated through the measurement of polarization curves on steel bolts which were roll formed and subsequently coated with various types of coating methods. According to the measured polarization curve, Ni-P electroless deposits on roll formed steel increased the resistance to corrosion. The corrosion resistance of Zn alloy powder coated steel bolt was found to be better than that of Zn-Ni electro-deposited sample.

• 생명과학회지
• /
• 제23권7호
• /
• pp.879-885
• /
• 2013

유아용 파우더는 유아의 기저귀 발진을 방지하거나 기타 다른 화장용 파우더의 원료로 사용되고 있고 그 주성분은 일반적으로 광물질인 탈크 분말이 주로 이용되고 있다. 탈크 분말은 사용에 있어 호흡기로 흡입하게 되면 심각한 폐 손상 등을 야기하여 위험하다고 알려져 있다. 쌀 분말을 이용한 유아용 파우더를 개발하기 위하여 3종류의 쌀 품종이 사용되었고, 곱게 분쇄하였다. 최적의 유아용 파우더를 얻기 위해 몇 단계의 분쇄과정을 거쳤고, 파우더에 대한 오일과 실리콘 코팅 처리 전후의 파우더 입자크기, 생리활성, 색차, 수분 흡수율 등의 파우더 특성을 검정하였다. 분말의 색택과 입자 크기 등의 특성에서 고아미 품종의 파우더가 우수한 특성을 보였고, 전자현미경 관찰결과 오일과 실리콘 오일 코팅한 쌀 파우더가 탈크에 비해 둥글고 부드러운 모양을 나타내었다. 또한 오일과 실리콘 코팅에 의해 평균 입자크기가 줄어드는 현상을 나타내었으며 쌀 분말의 단점인 수분흡수를 차단하여 파우더로서 우수한 특성을 유지함을 보였다.

• 한국식품저장유통학회지
• /
• 제8권2호
• /
• pp.181-186
• /
• 2001

The objective of this study is to determine the effect of soy protein isolate (SPI) film coating on the color, firmness, viscosity and weight loss of Rice Cake stored at 15, 20 and $25^{\circ}C$ (RH 50%) for 30 days. Raw materials mixed with SPI and cocoa powder (10:0, 7:3, 5:5, 3:7, w/w) were prepared. After adding sugar and shortening to raw materials, the mixture were refined to 25 micron of particle size. Coating of Rice Cake were carried out at $65^{\circ}C$. SPI coated Rice Cake had higher internal and external firmness comparing to the control at $25^{\circ}C$. SPI coated Rice Cake showed smooth surface morphology and had 0.71-1.01 mm of thickness. SPI coated Rice Cake showed less weight loss for 30 days compared to controls. SPI coating solution was successfully coated on Rice Cake and extended shelf-life over 15 days at room temperature.

• 한국세라믹학회지
• /
• 제22권6호
• /
• pp.21-28
• /
• 1985

The properties of magnetic recording materials largely depend on their shape magnetic anisotropy. The control of their shape and size distribution is very important for improving magnetic properties. The silica-coated goethite$(SiO_2$/$\alpha$-FeOOH=1.5wt%) having acicular shape was prepared. The sillica-coated goethite was heat-treated at 40$0^{\circ}C$~1,00$0^{\circ}C$ 1hr and then reduced at 50$0^{\circ}C$ 2hr. When the silica-coated goethite was heat-treated at 80$0^{\circ}C$ its acicular shape was maintained and its magnetic properties were improved(Hc: 1,325 Oe $\sigma$m:138.8 emu/g, Rs:0.56) However the acicular shape of the paricles was broken for non-coated hematite obtained by dehydration at 80$0^{\circ}C$ They were sintered and showed poor magnetic properties.

• Journal of Welding and Joining
• /
• 제8권4호
• /
• pp.58-68
• /
• 1990

The formation of thermal stresses by plasma spraying is generally considered as adverse. Therefore, the knowledge of stress distribution in the deposited layer during and after plasma spraying will be of special interest. In this study finite difference heat transfer analysis and finite element stress analysis were carried out to predict the change of stress distribution in the plasma coated layer with the variations of preheat temperature, number of scan, particle size, and bond coat. The results of the numerical analysis were as follows: 1) Transient stresses developed in the coated layer were up to the level of yiedl strength at the temperature. 2) The tensile stresses were developed in the deposited layer and the surface of the substrate, but the compressive stresses were developed in the rest of the substrate. 3) Transient and residual stresses were significantly affected by the preheat temperature. 4) The variations of temperature of powder particle and number of torch scan changed tensile stress distribution, but made no difference on the magnitude of the stresses. 5) Bond coated layer reduced the stree level of deposited layer.

• 한국식품영양과학회지
• /
• 제28권3호
• /
• pp.542-546
• /
• 1999

Uncoated, ethyl cellulose(EC) coated or methacrylic acid copolymer(MAC) coated ferrous sulfate was added to the yoghurt made from whole milk powder and quality changes of those yoghurt were observed. Among treatments uncoated ferrous sulfate added yoghurt showed the lowest quality in the view of pH, total acidity, total counts of lactic acid bacteria, and sensory characteristics. Quality change of MAC comparing to control was lower than that of EC. MAC and EC showed higher TBA value than no iron added or uncoated iron added one during storage. From sensory evaluation, MAC was not signif icantly different from control in color and off flavor after one day storage(p>0.05), however significant difference was observed in off flavor after 7 day storage(p<0.05). From above results, MAC coated ferrous sulfate added yoghurt showed better quality than uncoated or EC coated ferrous sulfate added one during storage.

• Carbon letters
• /
• 제4권1호
• /
• pp.24-30
• /
• 2003

In this study, densified 4D carbon/carbon composites were made from carbon fiber and coal tar pitch through the process of pressure impregnation and carbonization and then followed by carbonization and graphitization. To improve the oxidative resistance of the prepared carbon/carbon composites, the surface of carbon/carbon composites was coated on SiC by the pack cementation method. The SiC coated layer was created by depending on the constitution of pack powder, and reaction time of pack-cementation. The morpology of crystalline and texture of these SiC coated carbon/carbon composites were investigated by XRD, SEM/EDS observation. So the coating mechanism of pack-cementation process was proposed. The oxidative res istance were observed through the air oxidation test, and then the optimal condition of pack cementation was found by them. Besides, the oxidative mechanism of SiC formed was proposed through the observation of SiC coated surface, which was undergone by oxidation test.

• 한국세라믹학회지
• /
• 제37권4호
• /
• pp.338-344
• /
• 2000

Grain boundary chemistry and electrical characteristics of polycrystalline BaTiO3 ceramics, which were prepared with sol-gel surface-coated semiconducting powders, were investigated. Mn ions were coated on the powder surface by sol-gel coating-techniques. The additives coated on the surface of the powders were observed to be present near the grain boundaries of the ceramics. The ceramics exhibit the PTCR characteristics with a resistivity jump ratio(Pmax/Pmin) of about 2$\times$103. With raising the temperature from room temprature to 20$0^{\circ}C$, the oxidation state of the Mn ions varied from Mn3+ to Mn2+ in the coating layers. Near the grain boundaries an excessive negative charge layer of about 20nm was formed.