• Elastomers and Composites
• /
• v.2 no.1
• /
• pp.31-36
• /
• 1967

As a series of the studies of thin rubber coated fabrics, the experiments were concentrated on the investigation of the physical properties of the surface and back coated fabrics with natural and synthetic rubber. Cotton poplin and nine other cotton shootings were used as a base fabric and both sides of fabric, face and back, were coated by means of topping or spreading process. The physical properties of finished material were broadly investigated especially in view of the quality requirements of the poncho.

• Journal of Applied Biological Chemistry
• /
• v.64 no.1
• /
• pp.1-4
• /
• 2021

Ambient air pollution, in particular, particulate matter (PM) pollution imposes serious health concerns such as hospitalization and premature deaths, worldwide. While commercial breathing masks are in use for protection against this hazardous issue, yet their efficiency in filtering PM was not up to the par, besides several other discomforts such as poor breathability due to reduced air flow, sweat production etc. In this study, commercial face mask coated with β-glucan, a high molecular weight polymer is tested for its efficacy in filtering PM. Quantification of PM before and after filtration and microscopic observation (using scanning electron microscopy (SEM)) of the fabric used in filtering the dust pollutants (generated from wood chips and cigarette) showed that β-glucan coated fabric were significantly efficient in capturing PM (size of 10 and 2.5 ㎛ in diameter) than that of the untreated control fabric, wherein the former had filtration efficacy with fold increase of 11.6 and 2.6 towards capturing PM2.5 and PM10 respectively than the latter. Thus, β-glucan coated fabric was found to be effective in filtering PM.

• Korean Journal of Materials Research
• /
• v.33 no.4
• /
• pp.115-123
• /
• 2023

In this paper, we report and discuss the semi-permanently hydrophilic (SPH) treatment of polyester fabric using plasma polymerization and oxidation based on atmospheric pressure dielectric barrier discharge (APDBD) technology. SiO_xC_y(-H) was coated on polyester fabric using Hexamethylcyclotrisiloxane (HMCTSO) as a precursor, and then plasma oxidation was performed to change the upper layer of the thin film to SiO₂-like. The degradation of hydrophilicity of the SPH polyester fabrics was evaluated by water contact angle (WCA) and wicking time after repeated washing. The surface morphology of the coated yarns was observed with scanning electron microscopy, and the presence of the coating layer was confirmed by measuring the Si peak using energy dispersive x-ray spectroscopy. The WCA of the SPH polyester fabric increased to 50 degrees after 30 washes, but it was still hydrophilic compared to the untreated fabric. The decrease in hydrophilicity of the SPH fabric was due to peeling of the SiO_xC_y(-H) thin film coated on polyester yarns.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.2
• /
• pp.247-256
• /
• 2015

This study prepared fabric-heating elements of carbon nanofiber composite to characterize morphologies and electrical properties. Carbon nanofiber composite was prepared with 15wt% PVDF-HFP/acetone solution, and 0, 1, 2, 4, 8, and 16wt% carbon nanofiber. Dispersion of solution was conducted with stirring for a week, sonification for 24 hours, and storage for a month, until coating. Carbon nanofiber composite coated fabrics were prepared by knife-edge coating on nylon fabrics with a thickness of 0.1mm. The morphologies of carbon nanofiber composite coated fabrics were measured by FE-SEM. Surface resistance was determined by KS K0555 and worksurface tester. A heating-pad clamping device connected to a variable AC/DC power supply was used for the electric heating characteristics of the samples and multi-layer fabrics. An infrared camera applied voltages to samples while maintaining a certain distance from fabric surfaces. The results of morphologies indicated that the CNF content increased specifically to the visibility and presence of carbon nanofiber. The surface resistance test results revealed that an increased CNF content improved the performance of coated fabrics. The results of electric heating properties, surface temperatures and current of 16wt% carbon nanofiber composite coated fabrics were $80^{\circ}C$ and 0.35A in the application of a 20V current. Carbon nanofiber composite coated fabrics have excellent electrical characteristics as fabric-heating elements.

• Elastomers and Composites
• /
• v.1 no.1
• /
• pp.49-55
• /
• 1966

Based upon the results of the previous work, the experiments are concentrated on the improvement of the durability of rubber coated fabrics as a rain garment material. To obtain a much lighter and durable coated fabric, several kinds of light weight cotton prints having almost equal density in warp and fillingwise were chosen. Rubber coating on these prints was made by topping and spreading process using rubber compound of various viscosity, and the physical properties of final product were analysed and interpreted in terms of adhesion and durability. The results are as follows. 1. Any noticeable difference between two coating processes was not found in terms of physical properties. 2. Base fabrics should be dipped once into a dilute rubber compound before coating operation in order to obtain a uniform adhesion and physical properties, and the optimum range of the viscosity of dipping paste are from 100 poise to 200 poise. 3. Generally, the tearing strength of the coated fabrics is inversely proportional to the adhesion. 4. It was assumed that the increase of the water proofness after water immersion on the finished material which have dense base fabric is chiefly due to the swelling of the cellulosic fiber.

• Elastomers and Composites
• /
• v.1 no.1
• /
• pp.41-48
• /
• 1966

The physical properties of rubber coated fabrics, treated by means of spreading and topping process were studied. 1. The tearing strength of the rubber coated fabrics has shown decreasing tendency in comparison with fabric itself 2. Generally, the tearing strength is inversely proportional to the adhesion. 3. The value of hydrostatic pressure is in proportion to the density and tensile strength of the fabrics. 4. The topping process shows greater difference in adhesion initial and after water immersion than spreading process.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.158-159
• /
• 2015

Architectural fabrics are now used in membrane structure with the merits of free shape, lightness and opened up new possibility for the design of new building structures. Recently PVC, PVF, PVDF, PTFE coated fabric for using the membrane structures. However, clear standards for the design and construction is not exist because of the lack of Architectural fabric research. In this paper, Flammable properties of PVDF, PTFE coated fabrics are obtained through the Flammability test using the Cone Calorimeter. Based on these results, identify the fire resistance property of the Architectural fabric.

• Proceedings of KHEA Conference
• /
• 1997.07a
• /
• pp.258-258
• /
• 1997

• Fashion & Textile Research Journal
• /
• v.19 no.4
• /
• pp.493-503
• /
• 2017

This study investigated water vapor permeability of the 73 breathable fabrics for sports-wear according to the materials, finishing methods and fabric structural parameters. The water vapor permeability by KS K 0594 method of PET breathable fabric was superior than that of nylon one, in addition, water vapor permeability of coated or laminated breathable fabrics were higher than those of hot melt or dot laminated fabrics. The water vapor permeability of breathable fabric was dependent on the thickness, weight and density, which was consistent with measuring method. However, water vapor permeability according to materials and finishing method showed different results according to measuring method. The correlation coefficient of WVP of PET breathable fabrics between ISO and KS K measuring methods was -0.83 and the correlation coefficient of WVP of coated breathable fabrics was -0.72 and -0.71 for KS K and ASTM and -0.72 for KS K and ISO in hot melt laminated breathable fabrics. According to regression analysis, WVP of PET breathable fabric by both KSK and ISO measuring methods was highly dependent upon on the density and weight. In addition, WVP of hot melt laminated breathable fabric was highly dependent upon thickness, weight and density. Therefore, relevant measuring method for WVP of breathable fabrics has to be adopted to measure precise breathability.

• Textile Coloration and Finishing
• /
• v.35 no.3
• /
• pp.137-150
• /
• 2023

This paper investigated the applicability of polyester yarn coating using ther- moplastic polyester elastomer (TPEE) to replace polyvinyl chloride (PVC) coated yarn for blinds fabric. For this purpose, suitable TPEE for yarn coating was selected by measuring thermal and rheological properties and the yarn coating process conditions were investigated by changing variables such as extrusion temperature, die and nipple dimensions, take-up speed, and core yarn denier. TPEE coated yarns with a diameter of 0.3 and 0.4 mm were prepared, respectively. Tensile properties and cross-section uniformity revealed by a scanning electron microscopy (SEM) of the TPEE coated yarn were analyzed. Among several candidates, TPEE having a melt index of 35 and melting temperature of 153℃ was the most suitable for replacing PVC, and the opti- mum coating conditions for the TPEE coating yarn were a head temperature of 170℃ and core yarn denier of 420 denier. The selected TPEE coated yarns have enough ten- sile strength and uniformity to replace present PVC coated yarns, certified by SEM photograph.