• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.928-933
• /
• 2009

The purpose of this study is to examine the energy consumption, carbon dioxide emission & energy cost of district heating using sewage source. The annual TOE of heat pump using sewage source save 37.1 percent than city gas boiler. And annual carbon dioxide emission of heat pump cut down 41.3 percent than city gas boiler. If it charges the rate schedule for district heating to apartment resident, collected amount are 3,127,170 thousand won. As energy cost of heat pump & circulation pump are 1,378,072 thousand won. the profits are 1,749,098 thousand won. As payback period is 8.97years, applicability is low level. However, it has advantages in energy consumption, carbon dioxide emission & energy cost. Therefore, it needs to proceed through government assistance.

• 한국식품위생안전성학회지
• /
• 제11권4호
• /
• pp.227-234
• /
• 1996

This study was designed to characterize endotoxin-induced prostaglandin production in primary cultured rat vascular smooth muscle cells (VSMC). The time course for prostaglandin synthesis in lipopolysaccharide (LPS)-stimulated VSMC showed that the maximum production was reached in 12 hours. LPS induced prostaglandin H2 synthase (PGHS) activity in VSMC and the time course profile in the changes of PGHS activity paralleled that of total prostaglandin production. Differential treatment showed that 4 hours' exposure to LPS was enough for the maximum effect on the prostaglandin production and this effect was completely inhibited by the co-treatment of actinomycin D, a transcription inhibitor. These results suggest that LPS effect might be determined within 4 hours. Actinomycin D increased PGHS activity without affecting prostaglandin production if added 4 hours after LPS treatment. On the other hand, cyclogeximide, a translation inhibitor, augmented LPS-induced prostaglandin production if treated during first four hours, but it inhibited LPS-induced PGHS activity regardless of treatment schedule. These results suggest the existence of multiple regulating mechanisms in the LPS-induced prostaglandin synthesis.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.910-922
• /
• 2018

Conventional battery state-of-charge (SoC) estimation methods either involve sophisticated models or consume considerable computational resource. This study constructs an enhanced coulomb counting method (Ah method) for the SoC estimation of lithium-ion batteries (LiBs) by expanding the Peukert equation for the discharging process and incorporating the Coulombic efficiency for the charging process. Both the rate- and temperature-dependence of battery capacity are encompassed. An SoC mapping approach is also devised for initial SoC determination and Ah method correction. The charge counting performance at different sampling frequencies is analyzed experimentally and theoretically. To achieve a favorable compromise between sampling frequency and accumulation accuracy, a frequency-adjustable current sampling solution is developed. Experiments under the augmented urban dynamometer driving schedule cycles at different temperatures are conducted on two LiBs of different chemistries. Results verify the effectiveness and generalization ability of the proposed SoC estimation method.

• Journal of information and communication convergence engineering
• /
• 제8권4호
• /
• pp.393-398
• /
• 2010

For multi-cell environments, coordinated random beamforming technique in multiuser MIMO(multiple-input multiple-output) broadcast channel is considered. In order to mitigate severe interference at receivers, the multi-cell environments might require complex transmitter and receiver design because the scheduler decision based on full channel state information (CSI) in one cell must be intertwined with decision made by other cells' CSI. With limited CSI, however, this paper considers a scheme of randomizing transmitters' beamforming but being coordinated with other cell transmitters. The transmitters in each cell share random beamforming patterns and schedule data transmission within coherent scheduling period. The corandomized beams allow the users to be selected with the highest SINRs even in multi-cell environments. We analyze the performance of the proposed scheme. And numerical results show that the scheme achieves better performance than the conventional random beamforming when applying to multi-cell environments.

• 한국기계기술학회지
• /
• 제13권1호
• /
• pp.57-64
• /
• 2011

Recently, all-electrified houses have constructed and some tasks are being carried out to monitor energy consumption patterns. The energy monitoring includes various elements such as temperature, pressure, water flow, $CO_2$, and electricity. In this monitoring, electricity consumption is one of the essential factors because the performance and energy saving levels are described by this physical quantity. This quantity depends on materials, structure, operation of the house, which operation means consumer's life style and usage patterns of home appliances furthermore. Firstly, this paper shows a control simulation method which were developed a few years ago. And some different methods are proposed considering flexible experimental condition.

• 국제초고층학회논문집
• /
• 제8권3호
• /
• pp.185-192
• /
• 2019

Citic Tower is the first over-500 m-tall super highrise building in the world, located in the high seismic intensity area with paek ground acceleration over 0.2g in 475 years. This project is unique in its complexity, large volume, and challenging site conditions (zero site for construction). The traditional techniques can hardly meet safty, quality and schedule requirements of the construction. This article introduces the key construction technologies that are innovatively developed and applied in Citic Tower project construction, including intelligent super-high-rise building integrated construction platform system, independently developed by the CCTEB; Jump-Lift Elevator, which is the first of the kind with service height over 500 meters; combined temporary-and-permanent fire protection systems. The BIM technology is also applied in this project. Through technical innovation, and utilization of technologies, construction speed and safety had been greatly improved.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.992-995
• /
• 2005

Partnering has taken root all over the world as a remedy for the adversarial relation between parties concerned with construction projects. It is deemed to be derived from Keiretsu in Japan where parties related cooperate with one another as a team gaining reputations for completing projects on schedule and budget while maintaining high standard of quality. However, Keiretsu is now being weakened in proportion to the economic recession and there is an important change that needs to happen in the industry. The aims of this study are to find out the essence of Keiretsu by comparing Keiretsu with Partnering and to look for the direction of the reform plan.

• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.269-278
• /
• 2018

국내 BIM기술은 건축공사를 중심으로 적용되고 있으나, 최근 정부에서 인프라시설물 BIM적용 의무화를 검토하고 있으므로 토목공사까지 급속히 확대 적용될 것으로 예상된다. 인프라시설물은 광범위한 수평적 공간에서 공정이 진행되므로 BIM기술의 적용은 설계단계의 간섭관리보다는 시공단계의 공정관리 등 사업관리 전반에서 더욱 활용성을 갖게 된다. 4D CAD시스템은 시공단계의 공정관리에 적용되는 대표적인 BIM기술이나 실무적으로 활용할 수 있는 기능의 부족으로 실제 프로젝트에 적용되는 사례는 제한적이다. 본 연구에서는 상용화된 대표적인 4종류의 4D CAD시스템의 기능을 비교분석하여 프로젝트 특성별 선택 기준을 제공하고 실무적 활용성을 갖기 위해 개선되어야 할 기능을 분석하였다. 기능 분석결과로서 시스템별 장단점을 제시하였으며 시스템별 특성 분석으로 사용자의 활용 편리성을 제시하였다. 또한 토목시설물에 적용 가능한 기능 개선을 위하여 선형 4D시뮬레이션 방법론을 개발하여 인프라 시설물의 시공단계 BIM으로 활용성을 높일 수 있는 방안을 제시하였다. 철도 및 도로시설 공사에서 토공, 교량, 터널 등의 대부분 공정들은 수평적 공간에서 거리 축에 따라 작업이 진행된다. 따라서 단순히 기존 Gantt chart 방식의 4D 표현방법보다는 거리 축에 따라 공정이 표현되는 선형 4D 시뮬레이션 방법이 보다 실무적으로 도움이 될 수 있다.

• 한국건설관리학회논문집
• /
• 제19권1호
• /
• pp.43-53
• /
• 2018

모듈러 건축은 공장 생산 과정을 토해서 품질과 정확도를 향상 시킬 수 있고 같은 유닛을 반복적으로 만들어내기 때문에 대규모 생산과 비용 절감이 가능하다. 특히, 현장 작업과 공장 생산을 동시에 진행 할 수 있기 때문에 공기 단축이 가능하다. 그러나 실제 모듈러 건축 프로젝트 조사 보고서에 따르면 모듈러 건축과 기존 건축의 평균 공사 기간에서는 큰 차이를 보이고 있지 못하다. 이는 모듈러 건축 프로젝트의 실제 시공 시 발생하는 공기 지연 문제 때문이다. 따라서 실제 시공 시 공기 지연 방지를 위한 대안 선택이 필요하며, 특히 대규모 모듈러 건축 프로젝트 현장 시공의 경우 현장에서의 모듈 양중 및 조립 과정이 공장 생산과 동시에 진행되기 때문에 대안 파악이 공장과 현장을 동시에 고려하여 수행되어야 한다. 본 연구에서는 규모에 따른 모듈러 건축의 실제 시공 시 프로세스의 차이를 토대로 IDEF0 모델링을 통하여 대규모 모듈러 건축의 관리 요소를 파악하였고 이를 이용하여 공기 지연을 판단할 수 있는 공장 생산량과 현장 시공량 관리 모델을 개발하였다. 이를 이용하여 대규모 모듈러 건축 실제 시공 시 발생하는 공기 지연 문제를 감소시킬 수 있을 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.291-295
• /
• 2007

FTL(Fuel Test Loop) is a facility that confirms performance of nuclear fuel at a similar irradiation condition with that of nuclear power plant. FTL consists of In-Pile Test Section (IPS) and Out-Pile System (OPS). FTL construction work began on August, 2006 and ended on March, 2007. During Construction, ensuring the worker's safety was the top priority and installation of the FTL without hampering the integrity of the HANARO was the next one. Task Force Team was organized to do a construction systematically and the communication between members of the task force team was done through the CoP(community of Practice) notice board provided by the Institute. The installation works were done successfully overcoming the difficulties such as on the limited space, on the radiation hazard inside the reactor pool, and finally on the shortening of the shut down period of the HANARO. Without a sweet of the workers of the participating company of HEC(Hyundae Engineering Co, Ltd), HDEC(HyunDai Engineering & Construction Co. Ltd), equipment manufacturer, and the task force team, it is not possible to install the FTL facility within the planned shutdown period. The Commissioning of the FTL is on due to check the function and the performance of the equipment and the overall system as well. The FTL shall start operation with high burn up test fuels in early 2008 if the commissioning and licensing progress on schedule.