• 제목/요약/키워드: co-coercive

검색결과 94건 처리시간 0.02초

항자력과 자기포화도에 의한 WC-8%Co 초경합금의 기계적 성질 평가 (The Evaluation of Mechanical Property of WC-8%Co Alloys by Coercive Force and Magnetic Saturation)

  • 안동길
    • 비파괴검사학회지
    • /
    • 제20권5호
    • /
    • pp.438-444
    • /
    • 2000
  • WC-Co 초경합금의 항자력과 자기포화도를 평가하여 합금조직과 이에 따른 기계적 성질의 예측에 관해 연구하였다. WC 입경이 다르고 탄소함량 및 소결온도가 다른 WC-8%-Co 초경합금을 분말 야금법에 의해 제조하였다. 항자력과 자기포화도와 같은 WC-Co 합금의 자기적 특성은 합금조성 및 조직에 크게 의존하였다. 미소한 합금탄소량의 변화와 WC 입도의 차이에 의해서도 WC-Co 합금의 자기적 특성과 경도 및 항절력이 크게 변화하였다. WC 입도가 미세할수록 소결합금의 항자력과 경도는 증가하였고, 항자력은 경도의 증가와 비례하였다. WC-8%Co 합금의 화학 양론적 조성 아래로 카본함량이 감소하면 자기포화도와 항절력이 떨어지고 $\eta$상의 체적률도 꾸준히 증가하였다. WC-Co 합금에 있어서 자기포화도는 항자력과 반비례하였다.

  • PDF

고밀도 자기기록매체용 Cr/CoPtCr/$SiO_2$ 다층박막의 자기적 성질 (Magnetic Properties of Cr/CoPtCr/$SiO_2$Thin Films for High Density Magnetic Recording Media)

  • 최훈;홍연기;김종오
    • 한국재료학회지
    • /
    • 제8권6호
    • /
    • pp.560-564
    • /
    • 1998
  • RF magnetron sputtering법으로 Cr을 하지층으로 하여 CoPrCr 자성층을 성막한 후 보호층으로 $SiO_2$를 증착한 Cr/CoPtCr/$SiO_2$ 다층박막을 상온에서 제조하여 자기적 성질을 조사하였다. Cr 하지층 두께가 증가함에 따라 보자력이 증가하다가 거의 일정한 값을 얻었으며 최대 보자력값은 860 Oe였다. 보자력의 증가원인은 자성상의 면내 배향화와 자성 결정립간의 자기적인 분리에 의한다고 생각된다. 시편을 각 온도별로 열처리 함으로써 보자력이 크게 증가하였으며,$ 550^{\circ}C$에서 1시간 열처리한 박막의 보자력은 1650 Oe였다.

  • PDF

비정질 리본의 자기장중 열처리에 의한 보자력 노이즈의 변화에 관한 연구 (Study on the Coercive Field Strenght Noise Depends on The Magnetic Field Annealing Effect of Amorphous Ribbon)

  • 최근화;손대락
    • 한국자기학회지
    • /
    • 제4권2호
    • /
    • pp.150-153
    • /
    • 1994
  • 본 연구에서는 2쌍의 헬름홀쯔코일을 사용하여 비본형 시편의 종방향 및 횡방향으로 자기장 을 인가한 상태에서 열처리한 Co-계 비정질 합금 VITROVAC 6030의 보자력 노이즈를 측정하였다. 시편의 종방향 및 횡방향으로 dc 자기장을 인가한 상태에서 열처리한 시편의 경우, 보자력노이즈는 자화주파수 가 1~100 kHz 범위에서 거의 변화하지 않았으며, 시편의 종방향으로 ac 자기장을 횡방향으로는 dc자기 장을 인가한 상태에서 열처리한 시편의 경우의 보자력 노이즈는 자화주파수의 거듭제곱으로 감소하는 경 향을 보였다. 또한 자구핵형성이 일어날 경우 보자력 노이즈는 크게 증가하며 자화주파수의 거듭제곱으 로 감소하는 경향을 보였다.

  • PDF

코발트-철(鐵)을 전해석출(電解析出)한 양극산화피막(陽極酸化皮膜)의 자기특성(磁氣特性) (Magnetic Properties of Anodic Oxidized Films Electrodeposited Cobalt-Iron)

  • 강희우
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1993년도 하계학술대회 논문집 B
    • /
    • pp.1143-1146
    • /
    • 1993
  • The magnetic properties of aluminium anodized film in which Co-Fe alloy electrodeposited are investigated with regard to the alloy composition of magnetic films. The electrodeposited Co-Fe particles are confirmed to be single phase Co-Fe alloys by X-ray diffractions. The coercive force as well as the magnetic anisotropy energy can be controlled by changing the composition of the alloy. Magneticfilms having high saturation magnetization and high coercive force were obtained.

  • PDF

CoO가 삽입된 NiO스핀밸브의 자기저항특성 향상에 관한 연구 (Improvement of Magnetoresistance in NiO Spin-Valves including CoO layer)

  • 곽동호;김종기;이기암;황도근;이상석;;현준원
    • 한국자기학회지
    • /
    • 제10권3호
    • /
    • pp.112-117
    • /
    • 2000
  • NiO 스핀밸브의 자기저항 특성을 향상시키기 위해 바닥층으로 CoO를 삽입하였다. CoO/NiO 스핀밸브에서 삽입된 CoO의 두께에 따라서 자기저항비는 5.5 %까지 향상되었으며 동시에 교환결합력과 보자력도 증가하였다. XRD 측정결과, CoO 삽입에 따른 NiO의 결정성장에 특별한 변화는 없었음을 확인하였다. NiO 박막의 평균거칠기는 약 3.5 $\AA$이었으나, CoO 박막의 평균거칠기는 약 6.1 $\AA$으로 2배 이상 증가하였다. 따라서 본 실험에서는 CoO 삽입에 의한 계면 거칠기의 증가로 인해 교환결합력과 보자력이 증가했음을 알 수 있다. 한편 보자력의 감소를 위해 NiO/CoO/NiO/CoO/NiO 스핀밸브를 제작하여 보자력을 110 Oe에서 50 Oe로 50 % 감소시킬 수 있었으며, 교환결합력은 70 Oe 이상을 유지하였다.

  • PDF

$Fe(OH)_2-BaCO_3$$Fe(OH)_3-BaCO_3$ 의 공심물로부터 Ba-Ferrite 생성과정의 비교 (Comparision between Synthesis Processes of Ba-Ferrite from Coprecipitates $Fe(OH)_2-BaCO_3$ and $Fe(OH)_3-BaCO_3$)

  • 김태옥
    • 한국세라믹학회지
    • /
    • 제19권3호
    • /
    • pp.223-228
    • /
    • 1982
  • For the preparation of ferroxidure BaO.5.5 $Fe_2O_3$ with high coercive force, the green and calcined coprecipitates, which were obtained by neutralizing the mixed salt solution $FeCl_2-BaCl_2$ and $FeCl_3-BaCl_2$ with alkali solution $NaOH-Na_2CO_3$, were investigated about the thermal reaction, crystal growth, and the magnetic properties of the sintered specimens. The very single-domain crystallites of Ba-ferrite with high coercive force are formed from the coprecipitate of amorphous $Fe(OH)_3$ and amorphous $BaCO_3$ at lower temperature than that of subnucleus crystalline $\delta$-FeOOH and amorphous $BaCO_3$.

  • PDF

Magnetic Characteristics of CoNbZr amorphous Films with Pd addition

  • Song, J.S.;Wee, S.B.
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 제5회 학술대회 논문집 일렉트렛트 및 응용기술연구회
    • /
    • pp.90-95
    • /
    • 2003
  • The present paper is to investigate the phase stability and soft magnetic properties of amorphous CoNbZr films when Pd is added as a substitution for CoNbZr alloys. The films were prepared by a RF magnetron sputtering method. The CoNbZrPd films deposited on Si wafers exhibited amorphous structures being independent upon the amount of Pd added in the films. On the addition of 4.34% Pd, the excellent soft magnetic characteristics of the films were observed with a coercive force of 0.54 Oe and an anisotropy field of 11 Oe, whereas a coercive force of 1 Oe and an anisotropy field of 3.5 Oe were shown in the film without the addition of Pd. The increased anisotropy field and low coercive force of the films may be attributed to the occupancy of Pd in the preferred sites parallel to the external magnetic field applied on the deposition process. A permeability of about 1100 was kept constant in the operation frequency ranging up to 100 MHz, which can be explained by the Landau-Lifshitz formula.

  • PDF

Soft Magnetic Properties of CoNbZr amorphous Films with Pd addition

  • Song, J.S,;Wee, S.B,
    • 한국반도체및디스플레이장비학회:학술대회논문집
    • /
    • 한국반도체및디스플레이장비학회 2002년도 추계학술대회 발표 논문집
    • /
    • pp.54-58
    • /
    • 2002
  • The present paper is to investigate the phase stability and soft magnetic properties of amorphous CoNbZr films when Pd is added as a substitution for CoNbZr alloys. The films were prepared by a RF magnetron sputtering method. The CoNbZrPd films deposited on Si wafers exhibited amorphous structures being independent upon the amount of Pd added in the films. On the addition of 4.34% Pd, the excellent soft magnetic characteristics of the films were observed with a coercive force of 0.54 Oe and an anisotropy field of 11 Oe, whereas a coercive force of 1 Oe and an anisotropy field of 3.5 Oe were shown in the film without the addition of Pd. The increased anisotropy field and low coercive force of the films may be attributed to the occupancy of Pd in the preferred sites parallel to the external magnetic field applied on the deposition process. A permeability of about 1100 was kept constant in the operation frequency ranging up to 100 MHz, which can be explained by the Landau-Lifshitz formula.

  • PDF

Magnetic and Microwave Absorbing Properties of Ti-and Co-Substituted Barium Ferrite (BaFe12-2X TiXCoXO19)

  • Han-Shin Cho;Yong-Jin Kim;Sung-Soo Kim
    • Journal of Magnetics
    • /
    • 제4권2호
    • /
    • pp.65-68
    • /
    • 1999
  • The M-type barium ferrite ($BaFe_{12}O_{19}$) is well known magnetic material to be used as a permanent magnet due to its strong uniaxial anisotropy. The substitution of nonmagnetic $Ti^{+4}$ and magnetically weak $Co+^2ion for Fe^{+3}$ to its strong uniaxial anisotropy. The substitution of nonmagnetic $Ti^{+4}$ and magnetically weak $Co+^2ion for Fe^{+3}$ sublattices reduces the uniaxial anisotropy and those compounds open a new application field of noise suppressor at high frequencies. In this study, the magnetic and microwave absorbing properties are investigated in Ti-and Co-substituted barium ferrites ($BaFe_{12-2X} Ti_XCo_XO_{19}$). The saturated magnetization decreases linearly with the substitution of Ti and Co. The rapid drop in coercive force is observed with Ti and Co substitution upto x=1.2. The magnetic permeability spectrum shows the natural magnetic resonance in the specimens with small coercive force and large attenuation of microwave is predicted in those specimens at high frequencies (above 4 GHz).

  • PDF