• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.6
• /
• pp.893-900
• /
• 2008

The heat exchangers in the ships have been changed from the conventional shell & tube type to the plate type due to some merits as a compactness, a high thermal efficiency and a light-weight. In recent. it is reported that the vacuum phenomena were occurred in the seawater outlet piping of a main central cooler (MCC) on the ships. From the viewpoints of a common sense, the vacuum pressure in the seawater piping is rare event and difficult to be convinced because the seawater is pumped into the piping by a seawater pump with a high discharge head. However, the occurrence of a vacuum pressure in the seawater line of an MCC is real situation and often gives a severe damage to a rubber gasket of an MCC with a plate type heat transfer area. In this study, we analyzed the vacuum pressure in the seawater line of an MCC by using the simpl Bernoulli's equation and found that the vacuum pressure in the seawater line of an MCC is inevitable untill the installation postion of an MCC is not lowered.

• Wind and Structures
• /
• v.19 no.5
• /
• pp.467-480
• /
• 2014

The estimation of wind speed values used in codes and standards is an integral part of the wind load evaluation process. In a number of codes and standards, wind speeds outside of tropical cyclone prone regions are estimated using a single probability distribution developed from observed wind speed data, with no distinction made between the types of causal wind hazard (e.g., thunderstorm). Non-tropical cyclone wind hazards (i.e., thunderstorm, non-thunderstorm) have been shown to possess different probability distributions and estimation of non-tropical cyclone wind speeds based on a single probability distribution has been shown to underestimate wind speeds. Current treatment of non-tropical cyclone wind hazards in worldwide codes and standards is touched upon in this work. Meteorological data is available at a considerable number of United States (U.S.) stations that have information on wind speed as well as the type of causal wind hazard. In this paper, probability distributions are fit to distinct storm types (i.e., thunderstorm and non-thunderstorm) and the results of these distributions are compared to fitting a single probability distribution to all data regardless of storm type (i.e., co-mingled). Distributions fitted to data separated by storm type and co-mingled data will also be compared to a derived (i.e., "mixed") probability distribution considering multiple storm types independently. This paper will analyze two extreme value distributions (e.g., Gumbel, generalized Pareto). It is shown that mixed probability distribution, on average, is a more conservative measure for extreme wind speed estimation. Using a mixed distribution is especially conservative in situations where a given wind speed value for either storm type has a similar probability of occurrence, and/or when a less frequent storm type produces the highest overall wind speeds. U.S. areas prone to multiple non-tropical cyclone wind hazards are identified.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1982.05a
• /
• pp.15.2-15
• /
• 1982

Inverted papilloma arising from mucous membrane of the nasal cavity and paranasal sinuses is very rare benign neoplasm. Ward first described nasal papilloma in 1854, but its infrequent occurrence has delayed accurate understanding. This tumor was histologically benign neoplasm and clinically malignant, because it is locally invasive with extensive bone erosion at times and it shows a high incidence of local recurrence, and change of squamous cell carinoma was sometimes found. Recently, the authors have experienced a case of inverted pailloma with focal squamous cell carcinoma change which occupied the right side of the nsal cavity and maxillary sinus in a 48-year-old male. The tumor mass was removed surgically through intranasal and Caldwell-Luc's approach, and then was treated with systemic administration of Bleomycin, local spray of 5-FU and radiotherapy ($Co^{60}$). We report our case with review of current literatures.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.4892-4911
• /
• 2015

Trust as one of important social relations has attracted much attention from researchers in the field of social network-based recommender systems. In trust network-based recommender systems, there exist normally two roles for users, truster and trustee. Most of trust-based methods generally utilize explicit links between truster and trustee to find similar neighbors for recommendation. However, there possibly exist implicit correlations between users, especially for users with the same role (truster or trustee). In this paper, we propose a novel Collaborative Filtering method called CF-TC, which exploits Trust Context to discover implicit correlation between users with the same role for recommendation. In this method, each user is first represented by the same-role users who are co-occurring with the user. Then, similarities between users with the same role are measured based on obtained user representation. Finally, two variants of our method are proposed to fuse these computed similarities into traditional collaborative filtering for rating prediction. Using two publicly available real-world Epinions and Ciao datasets, we conduct comprehensive experiments to compare the performance of our proposed method with some existing benchmark methods. The results show that CF-TC outperforms other baseline methods in terms of RMSE, MAE, and recall.

• Tribology and Lubricants
• /
• v.32 no.5
• /
• pp.160-165
• /
• 2016

AISI 4140 steel is widely used in various mechanical components owing to its superior mechanical properties. Surface hardening techniques are often used to further improve the properties, particularly for applications with moving components. The aim of this research is to understand the effect of heat treatment process on surface properties and tribological characteristics of AISI 4140 steel. In this work, we prepare two different AISI 4140 steel specimens- one cooled by air and one by oil- and determine surface properties such as surface topography and roughness using a confocal microscope. We also observe the cross-sections of the specimens using a scanning electron microscope to understand the difference in the material structure. In addition, we assess the hardness with respect to the distance from the surface using a micro-Vickers hardness tester. After characterizing the surfaces of the specimens, we investigate the wear characteristics of the specimens under hydrodynamic lubrication. The results show the presence of grooves on the surface of the oil-cooled specimens. It is likely that such grooves are formed during the cooling process using the oil. However, we observe no other significant differences in the surface properties of the specimens. The wear test results show the occurrence of severe wear on the oil-cooled specimens, which may be due to the groove formed on the surface. The results of this work may be helpful to improve surface properties using surface hardening techniques from a tribological perspective.

• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1110-1116
• /
• 2003

The effects of packaging methods on the storage quality of minimally processed (prepeeled) onions were investigated to determine the optimal packing design. Various packaging treatments used for modifying headspace atmospheres included two passive MAP using LDPE and PP films, two active MAP using a gas mixture of 20% $O_2/10%\;CO_2/balance\;N_2$ and an ethylene scavenging sachet, and moderate vacuum packaging (MVP). The quality attributes of onion samples were evaluated periodically in terms of flesh weight loss, color of cut surface, decay ratio, microbial counts, and sensory properties during storage at $10^{\circ}C$ for 28 days. Packaging methods did not significantly influence surface color, weight loss, and microbiological populations of mesophiles, psychrotrophs, and lactic acid bacteria. They did, however, affect sensory characteristics as well as decay occurrence. Results indicated that seal-packaging with a gas-permeable plastic film under a mild vacuum condition could retain better onion quality in terms of microbial decay and visual sensory aspects as compared with the other packages.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.3 s.49
• /
• pp.139-151
• /
• 2006

Base metal sulfides occur in the Huronian sedimentary rocks that cover the Archean volcanic rocks in the Cobalt area, Ontario, Canada. They are mostly concentrated in the basal conglomerate which was formed in the pre-Huronian basin structure. Sulfide occurrence can be grouped as massive sulfide clasts in the basal and Coleman conglomerate, disseminated sulfides throughout the sediments, and disseminated sulfides near Ag-Co-Ni-As carbonate veins. Detrital mechanism can explain features such as angularity of sulfide fragments and graded bedding of dissemnated sulfides. Sulfides concentrated near carbonate veins are probably of hydrothermal origin. Nearby strata-bound type massive sulfide ore deposits and mineralized interflow units are the most probable sources for syngenetic sulfides. This is supported by the angularity of sulfide fragments, presence of massive sulfide boulders which are identical in mineralogy and texture to the strata-bound type sulfide deposits in the Archean basement, and a similar composition of sphalerite in the Archean volcanic rocks and Huronian sedimentary rocks. Some sulfide grains, especially in sandstones and argillites, were undergone recrystallization during the intrusion of the Nipissing diabase.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.2
• /
• pp.79-84
• /
• 2010

Osteoporosis was traditionally defined by the occurrence of nontraumatic fractures, especially of the spine, in the setting of low bone mass. Bisphosphonates are an important group of therapeutic agents for the management of osteoporosis, as they inhibit bone resorption and increase bone density, thereby potentially decreasing fracture risk. Risedronate sodium is a bisphosphonate class used by oral formulation. In this study, risedronate was transdermally delivered by iontophoresis. Effects of polarity, pH, current density, and drug concentration were studied using a side-by-side diffusion cell including the hairless mice skin. In addition we studied effect of enhancers. The flux was evaluated by HPLC/UV system. The amount of transported drug under iontophoretic delivery was approximately 186 fold higher than that under passive delivery. Flux was proportional to the increase of drug concentration and current density. The flux was observed about 0.68mg/$cm^2$ when the amout of Propyleneglycol monolaurate (PGML) used 1% as enhancer. Results indicated that iontophoresis is an effective method for transdermal administration of risedronate sodium

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.59-67
• /
• 2012

During the manufacturing of Portland cement, CO2 gas is also necessarily produced through both decarbonation of calcium carbonate and kiln burning. By partially replacing the Portland cement with limestone powder, which is an inert filler in a concrete mixture, CO2 consumption can be reduced in a construction field. This study is to investigate the fundamental durability characteristics of limestone powder added concrete. Experimental variable was the replacement ratio of limestone powder from 0% to 25% with 5% increment. Durability characteristics were investigated by resistance to freeze-thaw, alkali-silica reaction and de-icing chemical in addition to the properties of fresh concrete. From test results, it was observed that the addition of limestone powder did not significantly affect the resistance to freeze-thaw reaction and de-icing chemical. The addition of limestone powder reduced the occurrence potential of alkali-silica reaction by reducing an alkali content in Portland cement.

• Geomechanics and Engineering
• /
• v.14 no.4
• /
• pp.337-344
• /
• 2018

The study of the mining effect influenced by a normal fault has great significance concerning the prediction and prevention of fault rock burst. According to the occurrence condition of a normal fault, the stress evolution of the working face and fault plane, the movement characteristics of overlying strata, and the law of fault slipping when the working face advances from footwall to hanging wall are studied utilizing UDEC numerical simulation. Then the inducing-mechanism of fault rock burst is revealed. Results show that in pre-mining, the in situ stress distribution of two fault walls in the fault-affected zone is notably different. When the working face mines in the footwall, the abutment stress distributes in a "double peak" pattern. The ratio of shear stress to normal stress and the fault slipping have the obvious spatial and temporal characteristics because they vary gradually from the higher layer to the lower one orderly. The variation of roof subsidence is in S-shape which includes slow deformation, violent slipping, deformation induced by the hanging wall strata rotation, and movement stability. The simulation results are verified via several engineering cases of fault rock burst. Moreover, it can provide a reference for prevention and control of rock burst in a fault-affected zone under similar conditions.