• Fashion & Textile Research Journal
• /
• v.21 no.6
• /
• pp.789-799
• /
• 2019

This study classified and analyzed the upper body types of 7-13 years old elementary school boys, using 3D data from the 6th Size Korea. The results of this study are as follows. Seven factors were extracted from the factorial analysis as an independent factor for a cluster analysis. The cluster analysis generated four body types. Type 1 has large ratio of front and back depth as well as circumference, with a front protrusion. In Type 2, the vertical value of upper torso is longer than average; in addition, its flatness is the largest and produces a thin body type. Type 3 has a smaller flatness in the bust, waist, abdomen and hip than other types, while also having the largest BMI. Type 4 is characterized by a greater shoulder angle than other types and its other factors are close to average. As a result of the logistic regression analysis, the prediction model used eight variables to generate and its accuracy is 88.679%. The classification of upper body types from this study can be used as basic data to improve patternmaking for each body type. The generated prediction model is also expected to be used as a method to help classify upper body types using the eight variables.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.767-777
• /
• 2012

Annular Biofilm Reactor (ABR) equipped with coupons of three different pipe materials (STS 304, PVC, PE) was used to generate drinking water biofilm samples. The level of assimilable organic carbon (AOC) during the sample generation period was $37.3{\mu}g/L$, and this level did not seem to be low enough to limit the formation of biofilm in this study. Terminal-restriction fragment length polymorphism (T-RFLP) analyses determined T-RF profile as early as 3 h of exposure on PVC coupons. Average surface roughness ($R_a$) measured by atomic force microscopic analyses was 125.7 nm for PVC, and this value was higher than for STS (71.6 nm) and PE (74.0 nm). However, biofilm formation was faster on STS (6 h) than on PE (12 h), which indicated that surface roughness might not be the only factor that controlled the initiation of biofilm development. Upon detection of the T-RF peaks, richness (S) and diversity indices such as Shannon (H) and Simpson (1/D) demonstrated a rather slow increase until 48 h followed by rapid increase regardless of the pipe materials. Differences of microbial community structures among the biofilm samples were determined based on the cluster analysis using Jaccard coefficients (Sj). Biofilm communities could be divided into two distinct groups according to the exposure time regardless of the pipe materials. First group contained a young (< 48 h) biofilm samples (10 out of 11) but second group contained a mature (${\geq}$ 48 h) samples (11 out of 14). Results suggested that, due to the complexity of biofilm, the targeting of the first group of cluster was crucial for optimizing the management of drinking water distribution systems and controlling microbial growth.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.284-291
• /
• 1996

We have implemented a fast pressure control system for the transport chamber of a high vacuum cluster tool for advance semiconductor fabrication and evaluated its performance. To overcome the typically slow response of mass flow controllers, the modified experimental method is used very effectively to optimize the pressure control procedure. We successfully obtained quite fast pressure control by adjusting the starting time and eht tuning constants by the Ziegler-Nichols method. In the transport pressure $10\times 10^{-5}$ torr, actual pressure control starts from 4 sec after an initial gas load of 2.1 sccm. As a result, optimum conditions for the tuning constants are the rise rate of 0.02 torr/sec, the lag time of 0.15 sec, and the sampling period of 0.5 sec. Then the settling time is about 9 sec within about $\pm$0.5% for the referenced value. This settling time is enhanced above 75 percents in comparison with conventional experimental method. To account for the experimental effects observed, a theoretical model was developed. This experimental result has a tendency to fit with the theoretical result of $\omega$=-1.0.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.5
• /
• pp.469-476
• /
• 2000

This study was performed to understand the behavior and source characteristics of particulate trace metals in Daegu area. To do this, total of 84 samples had been collected from January to December 1999. TSP (total suspended particulate matter) and PM-10(particulate matter with aerodynamic diameters less 10${\mu}{\textrm}{m}$) were collected by filters on portable air sampler, and in TSP and PM-10 were analyzed by ICP(Inductively Coupled Plasma Spectrometer) after preliminary treatment. The results were follow as: first, annul means of TSP and PM-10 concentration were 123 and 69$\mu\textrm{g}$/㎤ respectively. The concentration of TSP adn PM-10 were highest in winter season compared to other seasons. Second, the concentration of Al, Fe, Mn were higher in TSP than in PM-10, indicating that these metals are generally associate with natural contributions. Third, a hierarchical clustering technique was used to group 9 metals. The results from the cluster analysis of TSP and PM-10 shows a similar clustering pattern : Fe, Al in a group and the rest of the metals such as Ni, Cr, As, Mn, Cd, Pb, Zn in the other group. One group of metal such as Fe, Al is associated with natural sources such as soil and dust. The other is closely related to urban anthropogenic sources such as fuel combustion, incineration, and refuse burning, Finally, using Al as a reference element, enrichment factors were used for identifying the major particulate contributors. The enrichment factors of Al. Fe<10 (standard value of enrichment factor) were considered to have a significant dust and soil source and termed nonenriched. Ni, Cr, As, Mn, Cd, Pb, Zn》10 is enriched and has a significant which is contributed by athropogenic sources.

• Journal of Internet Computing and Services
• /
• v.7 no.3
• /
• pp.155-167
• /
• 2006

It is desirable if users surfing on the Internet could find Web pages related to their interests as closely as possible. Toward this ends, this paper presents a topic specific Web crawler computing the degree of relevance. collecting a cluster of pages given a specific topic, and refining the preliminary set of related web pages using term frequency/document frequency, entropy, and compiled rules. In the experiments, we tested our topic specific crawler in terms of the accuracy of its classification, crawling efficiency, and crawling consistency. First, the classification accuracy using the set of rules compiled by CN2 was the best, among those of C4.5 and back propagation learning algorithms. Second, we measured the classification efficiency to determine the best threshold value affecting the degree of relevance. In the third experiment, the consistency of our topic specific crawler was measured in terms of the number of the resulting URLs overlapped with different starting URLs. The experimental results imply that our topic specific crawler was fairly consistent, regardless of the starting URLs randomly chosen.

• Journal of the Korean Society for information Management
• /
• v.18 no.3
• /
• pp.159-178
• /
• 2001

This paper presents an automatic text summarization model which selects representative sentences from sentence clusters to create a summary. Summary generation experiments were performed on two sets of test documents after learning the optimum environment from a training set. Centroid clustering method turned out to be the most effective in clustering sentences, and sentence weight was found more effective than the similarity value between sentence and cluster centroid vectors in selecting a representative sentence from each cluster. The result of experiments also proves that inverse sentence weight as well as title word weight for terms and location weight for sentences are effective in improving the performance of summarization.

• Journal of Korean Society on Water Environment
• /
• v.25 no.5
• /
• pp.735-741
• /
• 2009

In order to support the basic information for planning and performing the environment management such as Total Maximum Daily Loads (TMDLs), it is highly recommended to understand the spatial distribution of water quality and runoff data in the unit watersheds. Therefore, in the present study, we applied Self-Organizing Map (SOM) to detect the characteristics of spatial distribution of Biological Oxygen Demand (BOD) concentration and runoff data which have been measured in the Yeongsan, Seomjin, and Tamjin River basins. For the purpose, the input dataset for SOM was constructed with the mean, standard deviation, skewness, and kurtosis values of the respective data measured from the stations of 22-subbasins in the rivers. The results showed that the $4{\times}4$ array structure of SOM was selected by the trial and error method and the best performance was revealed when it classified the stations into three clusters according to the basic statistics. The cluster-1 and 2 were classified primarily by the skewness and kurtosis of runoff data and the cluster-3 including the basic statistics of YB_B, YB_C, and YB_D stations was clearly decomposed by the mean value of BOD concentration showing the worst condition of water quality among the three clusters. Consequently, the methodology based on the SOM proposed in the present study can be considered that it is highly applicable to detect the spatial distribution of BOD concentration and runoff data and it can be used effectively for the further utilization using different water quality items as a data analysis tool.

• Korean Journal of Environment and Ecology
• /
• v.8 no.2
• /
• pp.154-159
• /
• 1995

The Chuwang valley-Kumunkwangi valley forest in Chuwangsan area was studied to investigate forest structure in relation to altitude and part of slope. Forty eight quadrats were set up in the valley forest along altitude of 470m to 780m and part of the slope. Density and basal area of trees in tree strata decreased as increasing elevation. With increasing elevation the importance values of Quercus mongolica, Fraxinus rhynchophylla increased, while those of Pinus densiflora, Lindera obtussiloba decreased. As going from lower part to upper part of the slope, the importance values of Quercus valiabilis and Lindera obtussiloba increased while those of Fraxius rhynchophylla, Acer mono decreased. Species diversity tended to decreased as going to upper parts of the slope. The range of similarity indices between elevation belts, and parts of the slope were 74.4~84.2% and 68.0~96.3%, respectively. According to importance value and cluster analysis, the studied valley forest was classified into three forest communities of Pinus densiflora-deciduous tree species community of lower part of slope, Pinus densiflora-Quercus variabilis community of middle and upper part of slope, Pinus densiflora community of the top area.

• Journal of Ecology and Environment
• /
• v.39 no.1
• /
• pp.61-70
• /
• 2016

Major objectives of the study were to analyze chemical and biological influences of the river ecosystem on the artificial weir construction at three regions of Sejong-Weir (S_j-W), Gongju-Weir (G_j-W), and Baekje-Weir (B_j-W) during 2008-2012. After the weir construction, the discharge volume increased up to 2.9 times, and biological oxygen demand (BOD) and electrical conductivity (EC) significantly decreased (p < 0.05). Also, the decrease of total phosphorus (TP) was also evident after the weir construction, but still hyper-eutrophic conditions, based on criteria by , were maintained. Multi-metric model of Index of Biological Integrity (IBI) showed that IBI values averaged 21.0 (range: 20-22; fair condition) in the B_wc, and 14.3 (range: 12-18; poor condition) in the A_wc. The model values of IBI in S_j-W and G_j-W were significantly decreased after the weir construction. The model of Self-Organizing Map (SOM) showed that two groups (cluster I and cluster II) of B_wc and A_wc were divided in the analysis based on the clustering map trained by the SOM. Principal Component Analysis (PCA) was similar to the results of the SOM analysis. Taken together, this research suggests that the weir construction on the river modified the discharge volume and the physical habitat structures along with distinct changes of some chemical water quality. These physical and chemical factors influenced the ecosystem health, measured as a model value of IBI.

• Journal of the Economic Geographical Society of Korea
• /
• v.9 no.3
• /
• pp.273-296
• /
• 2006

The purpose of this paper is to investigate the formation and characteristics of Gwangju photonics agglomeration as a new agglomeration with a new industry. Data used in this study are locally investigatedfirm related data and the result of questionnaire surveys. Major findings are as follows. First, in the viewpoint of policy, national government suggested the whole policy frameworks and financial support for the strategic industrial development. Regional government picked up and fostered the strategic industry. The initial support of the national government and role of regional government triggered the initial development of the agglomeration. Second, in the spatial perspective, Gwangju photonics agglomeration is based on the externalities of knowledge and technology as well as the input-output network within value chains of production. There is a possibility that Gwangju photonics agglomeration will be developed as an innovation cluster of knowledge-based economy in the future beyond a mere production base of photonics.