• Korean Journal of Applied Biomechanics
• /
• v.29 no.3
• /
• pp.197-204
• /
• 2019

Objective: The purpose of this study was to identify the effect of high-heels (HH) modification on metatarsal stress in female workers. Method: Seven females who work in clothing stores ($heights=160.4{\pm}3.9cm$; $weights=47.4{\pm}4.1kg$; $age=31.3{\pm}11.1yrs$; $HH\;wear\;career=8{\pm}6.5yrs$) wore two types of HH (original and modified). The modified HH had been grooved with 1.5 cm radius and 0.2 cm depth around the first metatarsal area inside of the shoes using the modified shoe-last. Participants were asked to walk for 15 minutes on a treadmill and to stand for 10 minutes with original and modified HH, respectively. Kinetics data were collected by the F-scan in-shoe system. After each test, participants were asked to rate their perceived exertion using the Borg's 15-grade RPE scale and interviewed about their feeling of HH. Nonparametric Wilcoxon signed-rank test and effect size (Cohen's d) were used to determine the difference of the variables of interest between the original and modified HH. Results: In the present study, modified HH of the peak contact pressure of 1st metatarsal (PCP) left, PCP right, pressure time integral (PTI) left, peak pressure gradient (PPG) left during standing and PPG right during walking are greater than original HH. And even it didn't show statistically significant, the average in all pressure values of modified HH showed bigger than original HH. It surmised to be related to awkward with modified HH. Even though they said to feel the comfortable cause of big space inside of HH in the interview, they seemed to be not enough time to adapt with new HH. So their walking and standing postures were unstable. Conclusion: Modified the fore-medial part of HH can reduce the stress in the first metatarsal head and big toe area during standing and walking.

• Fashion & Textile Research Journal
• /
• v.21 no.5
• /
• pp.640-655
• /
• 2019

Technology status was investigated by analyzing patents and development cases of wearable robots. Development direction of wearable robot for wearability was also suggested by understanding the problems of wearability from development cases through the FGI technique. The number of patents per technical field was the most in the field of strength support, but AI in the technology field was different in each country; Korea was found to be poor in the category of daily living assistance. The number of patents by technology category was the most in the category of muscular strength assistance. However, the values of AI in the technology category were different in each country; Korea was found to be poor in the category of daily living assistance. Development cases were focused on rehabilitation, so development is not fulfilled uniformly by use purpose. By wearing body parts, robots with single function type were mainly developed. Rigid material robots were mainly developed. It was confirmed that wearable robot technology is not developed evenly in the category of application because it is in the early stage of the technical proposal and centered on main performance improvement. We derived twelve wearable conditions for wearable robots: Shape and Size Appropriateness, Movement Appropriateness, Composition Appropriateness, Physiological Appropriateness, Performance Satisfaction, Ease of Operation, Safety, Durability, Ease of Dressing, Ease of Cleaning, Portability and Ease of Storage and Appearance Satisfaction. Finally, the development direction of a wearable robot for each wearable condition was suggested.

• Human Ecology Research
• /
• v.57 no.2
• /
• pp.159-170
• /
• 2019

The growth accelerator period from a child's body into an adult body is a huge transition characterized by rapid growth in the near term. Body shape changes at this time of growth should be continually studied because they can result in different outcomes due to various variables. This study is basic study for the production of a junior brassiere patternmaking was conducted to separate the upper torso and breasts of adolescents by growth level. Analysis was conducted by age classification according to sales trends. In this study. 3D body shape data of Korean girls, Based on the 6th Size Korea data, analyzed statistically the upper body and breast according to the rate of growth. The results of this study represent the basis for the development of a junior brassiere to help lead a better life in regards to clothing. The study used 3D-data from girls aged 13 to 18. The analysis indicates that the upper body is in a different shape at age 15 with an increasing circumference, width and shoulder length of the chest; in addition, the sides are analyzed differently, suggesting that the brassiere configuration should be made differently at age 15. The breast form also showed different growth patterns at age 13 and the result was that the shape of the cup in brassiere should be configured differently depending on type.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.1
• /
• pp.115-128
• /
• 2022

This study investigated and analyzed the symptoms of urinary incontinence and the wearing status, purchase status, and preference for urinary incontinence products in women in their 50s and older. When purchasing urinary incontinence pads and panty, waterproof function and absorption speed were recognized as important. In urinary incontinence products, the most common function was to prevent leakage, and the preferred color was skin. When the number of urinary incontinence was high, the absorption function was considered important. Size or fit was important when the amount of urinary incontinence was small, but waterproof function was found to be important when the amount of urinary incontinence increased. It was hoped that a function to prevent leakage would be added when the incidence of urinary incontinence and the amount of urinary incontinence were high, and a panty-type pad was preferred. It was analyzed that the higher the number of births, the higher the amount of urinary incontinence, and the more frequent symptoms of urinary incontinence appeared. t was found that the earlier menopause, the higher the amount of urinary incontinence.

• The Research Journal of the Costume Culture
• /
• v.30 no.4
• /
• pp.495-512
• /
• 2022

This study aims to design a new sizing system for hygienic masks to protect against COVID-19-related respiratory disorders. The product sizes were collected from 70 commercially available hygienic masks, and 18 head measurements were obtained from the three-dimensional (3D) scan data of 2,048 men and women aged 20 to 69 years from the 6th Size Korea Survey. The statistical analysis was performed using the IBM Statistical Package for the Social Sciences (SPSS) 28.0 program. The "bitragion-subnasale arc" and "menton-sellion length" were chosen as the key body dimensions for the hygienic mask sizing system. The linear regressions with 18 3D head measurements were analyzed, and it was determined that the key body dimensions were useful for statistically predicting other 3D head measurements related to hygienic masks. A new sizing system was proposed for two types of masks, "masks with a tight fit" and "masks with a loose fit," taking into account the existing Korean Industrial Standards (KS) and the shortcomings of the sizes of hygienic masks on the market. The sizing system for tight-fitting masks consisted of the key body dimensions, with their sizes indicated by a pair of numbers. The sizing system for loose-fitting masks consisted solely of the bitragion-subnasale arc, with their sizes denoted by letters such as S, M, and L (denoting small, medium, and large, respectively). Future studies should consider this mask sizing system for different age groups, such as children and adolescents.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.4
• /
• pp.57-72
• /
• 2022

This study categorized and analyzed the body types of adult women in their 20s and 30s using 3D human measurement data from the 8th Size Korea, and intended to construct body shape and dimension data necessary for modeling Korean standard avatars. Data analysis considered data from 1302 adult women in their 20s and 30s, and a total of 49 index values, drop values, and angle items were subjected to factor analysis and one-way ANOVA to categorize the body type, and Duncan test to post-verify significant differences by type. As a result of conducting factor analysis, 13 factors were extracted and were categorized into 4 body types. Type 1 is short in the upper torso, long in the lower torso, long in the arms and legs, and has a upright body shape and sagging shoulder. Type 2 is short in the torso, arms and legs, and has large torso flexion and lower body circumference. Type 3 has abdominal obesity with small torso flexion and lower body circumference. Type 4 is a small body bending forward type. For the distribution of body types by age among those in their 20s and 30s, the highest appearance rate was Type 1 and was therefore selected as the represntative body type. The body type information of this study will be used as basic data for developing standard avatars.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.4
• /
• pp.147-161
• /
• 2023

This study used 3D anthropometric data from the 8th Size Korea to type and analyze whole body shapes of obese women in their 20s and 30s, and constructed dimensional data for human body items needed to create a 3D human body model for each type. The data analysis used data from 148 obese women in their 20s and 30s, and a total of 48 index values, drop values, and angle items were subjected to factor analysis and one-way variance analysis to categorize body types and verify significant differences by type. As a result of the factor analysis, 12 factors were extracted and divided into 4 body types. Type 1 is a 'standard type with a curved torso with balanced upper and lower body lengths', Type 2 is a 'bending forward type with a short, thick lower body, and an uncurved torso', Type 3 is a 'lean back type with a long and thin lower body and an H-shape torso', Type 4 is a 'sway back type with a long and thick lower body and abdominal obesity'. The representative body type of obese women in their 20s and 30s was identified as Type 1. The constructed body shape information will be used as basic data for future 3D human body modeling.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.123-136
• /
• 2024

This study aimed to assess the mobility and thermal comfort of personal protective equipment (PPE) among female healthcare workers, taking into account wearers' physique and PPE protection levels. A total of 16 participants (age: 26.3 ± 8.3 y, height: 161.5 ± 7.3 cm, body weight: 57.1 ± 11.0 kg, BMI: 21.9 ± 3.6), representing diverse body types, underwent four PPE conditions: L (Low_Plastic gown ensemble), M (Medium_Tyvek 400), H (High_Tyvek 800J with Powered Air Purifying Respirator [PAPR]), and E (Extremely high_Tychem 2000 with PAPR, Bib apron, and Chemical-resistant gloves). The mobility protocol consisted of 10 different tasks in addition to donning and doffing. The 10 tasks were repeated twice at an air temperature of 24.3 ± 0.1℃, 59±4%RH. Findings revealed a disproportionate relationship between PPE protection and wearer discomfort. Significant differences in clothing microclimate and total sweat rate were observed between the lowest (L) and highest (E) protection levels (p < 0.01), while distinctions among medium levels were inconclusive. Subjective evaluations favored conditions H and L over M and E (p < 0.05), indicating reduced heat, and humidity, increased comfort, and lower exertion. Instances of mobility discomfort, specially in the small body type group, underscored the need for a suitable PPE size system for Korean adult female medical workers. Furthermore, enhancements in gloves, shoe cover, and PAPR hood designs are essential for improving ease of movement and preventing hindrance.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.3
• /
• pp.183-196
• /
• 2017

Objective: The purpose of this research was to assess the agreement between job physical risk factor analysis by ergonomists using ergonomic methods and physical examinations made by occupational physicians on the presence of musculoskeletal disorders of the upper extremities. Background: Ergonomics is the systematic application of principles concerned with the design of devices and working conditions for enhancing human capabilities and optimizing working and living conditions. Proper ergonomic design is necessary to prevent injuries and physical and emotional stress. The major types of ergonomic injuries and incidents are cumulative trauma disorders (CTDs), acute strains, sprains, and system failures. Minimization of use of excessive force and awkward postures can help to prevent such injuries Method: Initial data were collected as part of a larger study by the University of Utah Ergonomics and Safety program field data collection teams and medical data collection teams from the Rocky Mountain Center for Occupational and Environmental Health (RMCOEH). Subjects included 173 male and female workers, 83 at Beehive Clothing (a clothing plant), 74 at Autoliv (a plant making air bags for vehicles), and 16 at Deseret Meat (a meat-processing plant). Posture and effort levels were analyzed using a software program developed at the University of Utah (Utah Ergonomic Analysis Tool). The Ergonomic Epicondylitis Model (EEM) was developed to assess the risk of epicondylitis from observable job physical factors. The model considers five job risk factors: (1) intensity of exertion, (2) forearm rotation, (3) wrist posture, (4) elbow compression, and (5) speed of work. Qualitative ratings of these physical factors were determined during video analysis. Personal variables were also investigated to study their relationship with epicondylitis. Logistic regression models were used to determine the association between risk factors and symptoms of epicondyle pain. Results: Results of this study indicate that gender, smoking status, and BMI do have an effect on the risk of epicondylitis but there is not a statistically significant relationship between EEM and epicondylitis. Conclusion: This research studied the relationship between an Ergonomic Epicondylitis Model (EEM) and the occurrence of epicondylitis. The model was not predictive for epicondylitis. However, it is clear that epicondylitis was associated with some individual risk factors such as smoking status, gender, and BMI. Based on the results, future research may discover risk factors that seem to increase the risk of epicondylitis. Application: Although this research used a combination of questionnaire, ergonomic job analysis, and medical job analysis to specifically verify risk factors related to epicondylitis, there are limitations. This research did not have a very large sample size because only 173 subjects were available for this study. Also, it was conducted in only 3 facilities, a plant making air bags for vehicles, a meat-processing plant, and a clothing plant in Utah. If working conditions in other kinds of facilities are considered, results may improve. Therefore, future research should perform analysis with additional subjects in different kinds of facilities. Repetition and duration of a task were not considered as risk factors in this research. These two factors could be associated with epicondylitis so it could be important to include these factors in future research. Psychosocial data and workplace conditions (e.g., low temperature) were also noted during data collection, and could be used to further study the prevalence of epicondylitis. Univariate analysis methods could be used for each variable of EEM. This research was performed using multivariate analysis. Therefore, it was difficult to recognize the different effect of each variable. Basically, the difference between univariate and multivariate analysis is that univariate analysis deals with one predictor variable at a time, whereas multivariate analysis deals with multiple predictor variables combined in a predetermined manner. The univariate analysis could show how each variable is associated with epicondyle pain. This may allow more appropriate weighting factors to be determined and therefore improve the performance of the EEM.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.2
• /
• pp.73-87
• /
• 2018

As men in their 30s are spending more money on clothing, it is becoming increasingly important to first conduct an anthropometric study and then develop garment patterns accommodating the changes found in body sizes and types of men in their 30s, in order to effectively address their fit dissatisfaction. Thus this study aims to explore changes in upper body sizes and body types of men in their 30s, which provide basic measurements for designing major garment items including jackets and shirts. To this purpose, key anthropometric dimensions of the upper body of men in their 30s, taken from the 6th (2015) and 7th (2016) surveys conducted by Size Korea, were analyzed using SPSS 24.0 for Windows. Independent sample t-tests were conducted on major upper body sizes to track changes with measuring time. Factor and cluster analyses were used to classify body types. By comparing the two surveys, it was found that the overall body sizes of men in their 30s were increasing in height-related items, circumference, thickness, and width, -as well as body weight and BMIs. Upper body height-related items, in particular, showed a higher average value in the 6th survey than in the 7th, indicating that the overall body types of men are becoming "westernized" with longer legs and shorter torso. Finally, five factors were derived to determine the typical upper body types of men in their 30s and the body types were classified into three categories according to the cluster analysis. First, those with a relatively small build with short stature and torso. Second, those with the highest stature and vertical dimension with the smallest torso volume and least body fatness. Third, those with the biggest torso volume and most body fatness with bigger width between armpits and shoulders. The distributional pattern analysis showed that men in their 30s tend to have increasingly higher stature but lower body weight and BMIs than in the past, implying that their body types are becoming close to those of men in their 20s.