• International Journal of Concrete Structures and Materials
• /
• 제18권3E호
• /
• pp.213-219
• /
• 2006

Modified singular fracture process zone(S-FPZ) model is proposed in this paper to determine a fracture criterion for continuous crack propagation in concrete. The investigated fracture properties of the proposed fracture model are strain energy release rate at a micro-crack tip and the relationship between crack closure stress(CCS) and crack opening displacement(COD) in the FPZ. The proposed model can simulate the actual fracture energy of experimental results fairly well. The results of the experimental data analysis show that specimen geometry and loading condition did not affect the CCS-COD relation. However, the strain energy release rate is a function of not only specimen geometry but also crack extension. The strain energy release rate remained constantly at the minimum value up to the crack extension of 25 mm, and then it increased linearly to the maximum value. The maximum fracture criterion occurred at the peak load for specimens of large size. The fracture criterion remained at the maximum value after the peak load. The variation of the fracture criterion is caused by micro-cracking and micro-crack localization. The fracture criterion of strain energy release rate can simply be the size effect of concrete fracture, and it can be used to quantify the micro-cracking and micro-crack localizing behavior of concrete.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권2호
• /
• pp.100-106
• /
• 2013

There are many challenges for reconstruction after intraoral tumor resection. Especially, palatomaxillary reconstruction has two primary goals: closure of the oronasal communication and re-creation of proper myomucosal function. Prosthodontic treatment using obturator and several surgical procedures are selected depending on the size and site of the defect, the difficulty of operative procedure, operation time and donor site problem. Above all, it is considered that radial forearm free flap is the first choice for palatal reconstruction. Our department introduces a novel method using tunnelized-facial artery myomucosal island flap for palatomaxillary defect reconstruction, which can successfully reduce donor-site morbidity, and duration of surgery and hospitalization.

• 한국재료학회지
• /
• 제25권4호
• /
• pp.183-190
• /
• 2015

Fatigue crack growth rate tests were conducted as a function of temperature, dissolved hydrogen (DH) level, and frequency in a simulated PWR environment. Fatigue crack growth rates increased slightly with increasing temperature in air. However, the fatigue crack growth rate did not change with increasing temperature in PWR water conditions. The DH levels did not affect the measured crack growth rate under the given test conditions. At $316^{\circ}C$, oxides were observed on the fatigue crack surface, where the size of the oxide particles was about $0.2{\mu}m$ at 5 ppb. Fatigue crack growth rate increased slightly with decreasing frequency within the frequency range of 0.1 Hz and 10 Hz in PWR water conditions; however, crack growth rate increased considerably at 0.01 Hz. The decrease of the fatigue crack growth rate in PWR water condition is attributed to crack closure resulting from the formation of oxides near the crack tips at a rather fast loading frequency of 10 Hz.

• 대한조선학회논문집
• /
• 제55권2호
• /
• pp.169-177
• /
• 2018

Twisted rudder, twisted rudder with bulb, and twisted rudder with bulb and fin have been developed computationally for 3,000 TEU container ship through parametric study. The objective function is to minimize delivered power in model scale. Design variables are twisted angle, rudder bulb diameter and fin angle. The governing equation is Reynolds averaged Navier-Stokes equations in an unsteady turbulent flow and the Reynolds stress model applied for the turbulent closure. A double body model is used for the treatment of free-surface. The calculation was carried out in towing and self-propulsion conditions at design speed. The sliding mesh technique was employed to simulate the flow around the propeller. Form factor is obtained from the towing computation. Self-propulsion point is obtained from the self-propelled computations at two propeller rotating speeds. The delivered power due to the designed twisted rudder, twisted rudder with bulb, and twisted rudder with bulb and fin are reduced by 1.1%, 1.6%, and 2.0%, respectively.

• 대한조선학회논문집
• /
• 제42권6호
• /
• pp.593-600
• /
• 2005

The finite volume based multi-block RANS code, WAVIS developed at KRISO, is used to simulate the turbulent flow field around the KRISO container ship (KCS) and the modified KRISO tanker (KVLCC2M). The realizable k-$\varepsilon$ turbulence model with a wall function is employed for the turbulence closure. The free surface flow with and without propeller is mainly investigated for the KCS and the double model flow is concerned for the KVLCC2M which is obliquely towed in still water. The computed results are compared with the experimental data provided by CFD Tokyo Workshop 2005 in terms of wave profiles, hull surface pressure and wake distribution with and without propeller for the HCS and wake distribution and hydrodynamic forces and moments with various drift angles for the KVLCC2M.

• 대한조선학회논문집
• /
• 제42권6호
• /
• pp.583-592
• /
• 2005

The turbulent free surface flow around a self-propelled KRISO 138K LNG Carrier is numerically simulated using the finite volume based multi-block RANS code, WAVIS developed at HRISO. The realizable k-$\varepsilon$ turbulence model with a wail function is employed for the turbulence closure. The free surface is captured with the Level-Set method and body forces are used to model the effects of a propeller without resolving the detail blade flow. In order to obtain an accurate free surface solution and stable convergence, the computations are executed with a proper fine grid refinement around the free surface and with an adoption of implicit discretization scheme for the Level-Set formulation. The computed velocity vectors at the several stations and wave patterns show a good agreement with the experimental results measured at the KRISO towing tank.

• 대한기계학회논문집B
• /
• 제28권7호
• /
• pp.879-886
• /
• 2004

A numerical optimization has been carried out to determine the shape of the three-dimensional channel with oblique ribs attached on both walls to enhance turbulent heat transfer. The response surface based optimization is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of fluid flow and heat transfer. Shear stress transport (SST) turbulence model is used as a turbulence closure. Numerical results fur heat transfer rate show good agreements with experimental data. four dimensionless variables such as, rib pitch-to-rib height ratio, rib height-to-channel height ratio, streamwise rib distance on opposite wall to rib pitch ratio, and the attack angle of the rib are chosen as design variables. The objective function is defined as a linear combination of heat-transfer and friction-loss related coefficients with a weighting factor. D-optimal method is used to determine the training points as a means of design of experiment. Sensitivity of the objective parameters to each design variable has been analyzed. And, optimal values of the design variables have been obtained in a range of the weighting factor.

• 대한치과마취과학회지
• /
• 제11권2호
• /
• pp.177-182
• /
• 2011

There are five principal causes for excessive bleeding in the immediate postextraction phase ; (1) Vascular wall alteration (wound infection, scurvy, chemicals, allergy) (2) Disorders of platelet function (genetic defect, drug-aspirin, autoimmune disease) (3) Thrombocytopenic purpuras (radiation, leukemia), (4) Inherited disorders of coagulation (hemophilia, Christmas disease, vitamin deficiency, anticoagulation drug-heparin, coumarin, aspirin, plavix). If the hemorrhage from postextraction wound is unusually aggressive, and then dehydration and airway problem are occurred, the socket must be packed with gelatine sponge(Gelfoam) that was moistened with thrombin and wound closure & pressure dressing are applied. The thrombin clots fibrinogen to produce rapid hemostasis. Gelatine sponges moistened with thrombin provide effective coagulation of hemorrhage from small veins and capillaries. But, in dental alveoli, gelatine sponges may absorb oral microorganisms and cause alveolar osteitis (infection). This is a case report of bleeding and infection control by the circumferential suture and iodoform gauze drainage on infected active bleeding extraction socket under sedation and local anesthesia in a 71-years-old male patient with anticoagulation drug.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2000년도 제26회 펄프종이기술 국제세미나
• /
• pp.34-39
• /
• 2000

Today's size of production operations in the packaging paper sector I sconstantly increasing , featuring integral processing systems, high-speed paper machines, and the increased marketing of lower basis weight products. The risk factors involved in these large investments lie more than ever in the available furnish potential and ongoing requirements for further closure of water loops and lower operating costs. A comparison is drawn between recovered paper furnish mixtures used in European mills with regard to fibre properties, strength potential and contaminant content, Both the furnish situation and development trends in modern fluting and testliner machines are instigating concept changes in stock preparation, the approach flow as well as in process water and rejects technology. Developments are currently focussed for example on more efficient debris separation using fine slotted screening, optimized refining , more systematic process water management with loop separation and integral water clarification as well as more efficient removal of microstickies, fillers and fines through appropriate combination of rejects handling and water clarification processes. Product quality differentiation depends decisively on strength characteristics as a function of refining , fines removal , paper machine technology, and sizing . Maximum availability of today's high speed paper machines and , as a result, cost effective production can be ensured by optimum balancing of all subsystems with in the overall concept and by reliable control of problems with contaminants and deposits.

• Journal of Chest Surgery
• /
• 제19권1호
• /
• pp.25-34
• /
• 1986

Recently, radionuclide angiocardiogram is one of the most common procedure for assessment of ventricular performance due to its distinctive advantages such as safety, accuracy, and ease of repeated studies. Also, measurement and comparison between pre and postoperative left ventricular ejection fraction [LVEF] are meaningful for assessing the severity of myocardial damage which occurred during open heart surgery and the status of myocardial recovery. We obtained pre and post operative LVEF using radionuclide angiocardiogram on 30 patients composed of atrial septal defect, ventricular septal defect, cyanotic congenital heart disease, and valvular heart disease who undergone the open heart surgery from March to august 1984. The study revealed that ventricular septal defect and mitral valvular heart disease showed 8.1% and 6.2% decreases of postoperative LVEF, respectively. But, there are little increases of postoperative LVEF in the atrial septal defect and cyanotic congenital heart disease. In ventricular septal defect, each group of Qp/Qs over 2.0 and systolic pulmonary artery pressure over 50mmHg showed significant 17% and 14.7% decreases of postoperative LVEF, respectively. Considering the duration of the aortic cross clamping times and closing methods of VSD, each group of duration over 30 min. and of patch closure showed 13.9% and 14.2% decreases of LVEF between pre and postoperative status respectively which was significant finding statistically.