• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.2 s.115
• /
• pp.1-8
• /
• 2006

In this study a process simulation method was used to analyze the accumulation phenomena of anionic starch in the process white water as the closure level of a fine paper making process is increased. A pilot paper machine was used as a model process. Dynamic simulations of the influence of white water usage ratio and uncoated broke addition ratio on the variation of process variable was monitored as a function of time. Results from the dynamic simulations showed that the volume of reservoirs affected the dynamic behavior of the process. The dynamic behavior of flow rate and dissolved starch concentration in process units were different from each other. The speed of the change of dissolved starch concentration in process units was depend on the starting point of the change of dissolved starch concentration, the length of circulation loop, and the volume of reservoirs.

• Journal of Chest Surgery
• /
• v.29 no.1
• /
• pp.86-89
• /
• 1996

This is a report of successful conversion arterial switch operation for failed Sunning procedure in transposition of the great arteries(TGA) with ventricular septal defect(VSD). A 15 month-male patient was admitted due to intractable congestive heart failure after Sunning operation was done at the age of 8 months. Angiography revealed marked dysfunction of the morphologic right ventricle with tricuspid regurgitation and residual VSD. The pulmonary ventricle 1 systemic ventricle pressure ratio' of 75/85 at catheter study enabled us to do the take down of denning repair, patch closure of VSD and arterial switch without pulmonary artery banding. After the operation, the baby showed good growth with normal ventricular function.

• Geomechanics and Engineering
• /
• v.22 no.1
• /
• pp.11-23
• /
• 2020

In this study, a new analytical-numerical procedure is developed to give the stresses and strains around a circular tunnel in rock masses exhibiting different stress-strain behavior. The calculation starts from the tunnel wall and continues toward the unknown elastic-plastic boundary by a finite difference method in the annular discretized plastic zone. From the known stresses in the tunnel boundary, the strains are calculated using the elastic-plastic stiffness matrix in which three dimensional Hoek-Brown failure criterion (Jiang and Zhao 2015) and Mohr-Coulomb potential function with proper dilation angle (i.e., non-associated flow rule) are employed in terms of stress invariants. The illustrative examples give ground response curve and show correctness of the proposed approach. Finally, from the results of a great number of analyses, a simple relationship is presented to find out the closure of circular tunnel in terms of rock mass strength and tunnel depth. It can be valuable for the preliminary decision of tunnel support and for prediction of tunnel problems.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.1
• /
• pp.9-16
• /
• 2012

This paper presents the numerical results of a simulation of the free surface flow around a blunt bow ship model and focuses on the validation of the proposed method with a brief investigation of the relation between the resistance and free surface behavior. A finite volume method based on the Reynolds Averaged Navier-Stokes (RANS) approach is used to solve the governing flow equations, where the free surface, including wave breaking,is captured by using a two-phase Level-Set (LS) method. For turbulence closure, a two equation k-${\varepsilon}$ model with the standard wall function technique is used. Finally, the numerical results are compared with the available experimental data, showing good agreement.

• Journal of the Korean Ceramic Society
• /
• v.33 no.5
• /
• pp.602-615
• /
• 1996

The purpose of the present study is to investigate the microstructural effect on the R-curve behavior in three aluminas with different grain size distributions by analyzing the bridging stress distribution. The crack opening displacement (COD) according to the distance behind the stationary crack tip was measured using an in situ SEM fracture method. The measured COD values in the fine-grained alumina agreed well with Wiederhorn's sollution while they deviated from Wiederhorn's solution in the two coarse-grained aluminas because of the increase of the crack closure due to the grain interface bridging in the crack wake. A numerical fitting procedure was conducted by the introduction of the power-law relation and the current theoretical model together with the measured COD's in order to obtain the bridging stress distribution. The results indicated that the bridging stress function and the R-curve computed by the current model were consistent with those computed by the power-law relation providing a reliable evidence for the bridging stress analysis of the current model. The strain-softening exponent in the power-law relation n, was calculated to be in the range from 2 to 3 and was closely related to the grain size distribution. Thus it was concluded from the current theoretical model that the grain size distribution affected greatly the bridging stress distribution thereby resulting in the quantitative analysis of microfracture of polycrystalline aluminas through correlating the local-fracture-cont-rolling microstructure.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.9
• /
• pp.1051-1057
• /
• 2004

A numerical optimization procedure for the shape of three-dimensional channel with angled ribs mounted on one of the walls to enhance turbulent heat transfer is presented. The response surface method is used as an optimization technique with Reynolds-averaged Wavier-Stokes analyses of flow and heat transfer. SST turbulence model is used as a turbulence closure. Computational results for local heat transfer rate show reasonable agreements with experimental data. The pitch-to-height ratio of the rib and rib height-to-channel height ratio are set to be 9.0 and 0.1, respectively, and width-to-rib height ratio and attack angle of the rib are chosen as design variables. The objective function is defined as a linear combination of heat-transfer and friction-loss related terms with weighting factor. Full-factorial experimental design method is used to determine the data points. Optimum shapes of the channel have been obtained in the range from 0.0 to 0.1 of weighting factor.

• Archives of Reconstructive Microsurgery
• /
• v.23 no.2
• /
• pp.65-69
• /
• 2014

Purpose: Soft tissue reconstruction is essential for recovery of finger function and aesthetics in any traumatic defect. The authors applied a reverse homodigital artery island flap for soft tissue defect on distal part of digits. The aim of this study is to evaluate the efficacy of the procedure. Materials and Methods: Seven cases of soft tissue defects of finger tip were included in this study. There were six male and one female, mean age was 43 years and mean follow-up period was 38 months. The length of flaps ranged from 2.0 to 2.5 cm and width ranged from 1.0 to 2.0 cm. Flap survival, postoperative complications were evaluated. Results: All flaps survived without loss. Donor sites were repaired with primary closure in five cases and skin graft in two cases. None of the patients showed significant complications and their average finger motion was $255^{\circ}$ in total active motion at the last follow-up. Conclusion: The authors suggest that the reverse homodigital artery island flap could be a versatile treatment option for the soft tissue defect on distal part of digits.

• Childhood Kidney Diseases
• /
• v.1 no.1
• /
• pp.97-100
• /
• 1997

Rupture or contrast extravasation of urinary bladder after voiding cystourethrography(VCUG) was a very rare complication which occurred in neurogenic or unused bladder. Only one case of bladder extravasation was reported in a girl with normal bladder function. Case: A 18 month-old boy presented with recurrent E. Coli urinary tract infection and was evaluated with isotope VCUG, which was failed to catheter insertion. Two days later, isotope VCUG was repeated with difficult catheter insertion. Two hours after isotope VCUG, gross hematuria and anuria developed, and abdominal distension was followed. Bladder rupture was diagnosed by abdominal sonography and computerized tomography. He was treated with simple closure and suprapubic catheter drainage.

• The Plant Pathology Journal
• /
• v.29 no.4
• /
• pp.471-476
• /
• 2013

Plants are frequently exposed to numerous environmental stresses such as dehydration and high salinity, and have developed elaborate mechanisms to counteract the deleterious effects of stress. The phytohormone abscisic acid (ABA) plays a critical role as an integrator of plant responses to water-limited condition to activate ABA signal transduction pathway. Although perception of ABA has been suggested to be important, the function of each ABA receptor remains elusive in dehydration condition. Here, we show that ABA receptor, pyrabactin resistance-like protein 8 (PYL8), functions in dehydration conditions. Transgenic plants overexpressing PYL8 exhibited hypersensitive phenotype to ABA in seed germination, seedling growth and establishment. We found that hypersensitivity to ABA of transgenic plants results in high degrees of stomatal closure in response to ABA leading to low transpiration rates and ultimately more vulnerable to drought than the wild-type plants. In addition, high expression of ABA maker genes also contributes to altered drought tolerance phenotype. Overall, this work emphasizes the importance of ABA signaling by ABA receptor in stomata during defense response to drought stress.

• Phonetics and Speech Sciences
• /
• v.9 no.4
• /
• pp.19-25
• /
• 2017

The current study focused on the production of geminate nasal consonants across different word boundary types in Korean as a function of speech style to investigate whether temporal properties are preserved across varying speaking rates. Assimilated geminates in Korean, known as true geminates, are produced with distinctively longer consonant duration compared to singletons. Despite a large body of literature for geminates across different languages, geminates in Korean have been relatively less investigated with respect to the durational patterns in relative terms and temporal variabilities. In this study, singletons, word-internal geminates and word-boundary (fake) geminates produced by ten native Seoul Korean speakers were compared in terms of absolute consonant closure duration, preceding vowel duration, the relative ratios (consonant-to-preceding vowel duration) as well as the temporal variabilities in speech production. The results showed that word-internal geminates were produced with longer consonant duration and greater temporal variabilities than singletons and word-boundary geminates in absolute duration, indicating relatively greater flexibility in timing. However, only word-internal geminates were produced with distinctively longer consonant duration with significantly lower variability in relative duration regardless of speech styles. The results provide some insight into the representation of temporal information in the production of Korean geminate consonants.