• 제목/요약/키워드: closed filter

검색결과 227건 처리시간 0.021초

시간지연과 불확실성을 가지는 위상동기루프의 루프필터에 대한 혼합 $H_2/H_{\infty}$ 출력궤환 제어기 설계 (Mixed $H_2/H_{\infty}$ Output Feedback Controller Design for PLL Loop Filter with Uncertainties and Time-delay)

  • 이경호;한정엽;박홍배
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 V
    • /
    • pp.2589-2592
    • /
    • 2003
  • In this paper, a robust mixed H$_2$/H$\_$$\infty$/ output feedback control method is applied to the design of loop filter for PLL carrier phase tracking. The proposed method successfully copes with large S-curve slope uncertainty and a significant decision delay in the closed-loop that may exist In modern receivers due to a convolutional decoder or an equalizer. The objective is to design an output feedback controller which minimizes the H$_2$performance while satisfying the H$\_$$\infty$/ performance to guarantee the gain margin and phase margin for linear time invariant(LTI) polytopic uncertain systems. LMIs based approach is given to solve this problem. We can verify the H$\_$$\infty$/ performance satisfaction and minimize the phase detector error through the simulation result.

  • PDF

클러터 환경에서의 표적 추적을 위한 준최적의 검출 문턱값 ((Suboptimal Detection Thresholds for Tracking in Clutter))

  • 정영헌;신한섭
    • 전자공학회논문지SC
    • /
    • 제39권2호
    • /
    • pp.176-181
    • /
    • 2002
  • 이 논문에서는 PDA(Probabilistic Data Association) 필터를 이용한 표적 추적에서 평균자승추정오차의 기대값을 최소화하는 표적 검출 문턱값의 최적제어 방법을 제시하고, 닫힌 형태의 준최적해를 구한다. 최적의 검출 문턱값을 구하기 위한 이전의 연구에서는 그래프를 이용한 부정확한 최적화 방법이나, 매우 시간이 많이 소요하는 수치해석적 최적화 알고리듬을 사용하였다. 하지만, 이 논문에서는 정보감소인자의 수치적 근사화식을 이용하여, 최적제어문제로 정식화하여 닫힌 형태의 준최적 검출 문턱값을 구하였다. 이 결과는 실시간 표적 추적에서 유용하게 사용될 수 있다.

목표함수를 이용한 IMC-PID 제어기 설계 (Design of IMC-PID Controller via Target Function)

  • 최인혁;서병설
    • 전자공학회논문지SC
    • /
    • 제43권3호
    • /
    • pp.1-7
    • /
    • 2006
  • 본 논문에서는 폐 루프 전달함수로부터 제어기를 얻는 방법에 기초한 IMC-PID 제어기 동조방법을 제안하였다. 플랜트는 시간 지연항을 갖는 2차 모델을 고려하고 목표함수로서 시간 지연항을 갖는 3차의 전달함수를 선택하였다. 필터 함수는 설계사양을 만족시키도록 하는 적절한 목표함수로부터 유도된다. 또한 강인-안정성을 입증하기 위한 강인성을 조사하였다.

Velocity feedback for controlling vertical vibrations of pedestrian-bridge crossing. Practical guidelines

  • Wang, Xidong;Pereira, Emiliano;Diaz, Ivan M.;Garcia-Palacios, Jaime H.
    • Smart Structures and Systems
    • /
    • 제22권1호
    • /
    • pp.95-103
    • /
    • 2018
  • Active vibration control via inertial mass actuators has been shown as an effective tool to significantly reduce human-induced vertical vibrations, allowing structures to satisfy vibration serviceability limits. However, a lot of practical obstacles have to be solved before experimental implementations. This has motivated simple control techniques, such as direct velocity feedback control (DVFC), which is implemented in practice by integrating the signal of an accelerometer with a band-pass filter working as a lossy integrator. This work provides practical guidelines for the tuning of DVFC considering the damping performance, inertial mass actuator limitations, such as stroke and force saturation, as well as the stability margins of the closed-loop system. Experimental results on a full scale steel-concrete composite structure (behaves similar to a footbridge) with adjustable span are reported to illustrate the main conclusions of this work.

모드절환식 다기능 무정전 전원장치 (Multifunctional UPS with Mode Transfer Method)

  • 김제흥
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 B
    • /
    • pp.1049-1051
    • /
    • 2001
  • This paper proposes a new control strategy of multifunctional uninterruptible power supply(UPS) with the performance of active power filter which compensate the harmonics and reactive power. To improve the transient response for the effective compensation in active power filter mode, it is considered that a simple and precise calculation method of the compensation reference current for the harmonics and reactive power compensation. So a novel closed-loop control strategy is used to calculate the reference current. And the current regulated instantaneous voltage control scheme is used in back-up power mode. The system model and control algorithm are described and analyzed, and the system performance is verified by the simulation results.

  • PDF

대부하 전기유압시스템의 부하압력 피이드백에 관한 연구 (The use of load pressure feedback in designing the high performance electro-hydraulic speed controller for large inertia system)

  • 김영대;이대옥;심재운
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
    • /
    • pp.358-363
    • /
    • 1987
  • It is widely noted that pressure feedback systems have been devised to damp the fluid resonance effectively in precision speed control-for large inertia system. A compensation technique preserving the natural output disturbance discrimination characteristics at lower frequencies is proposed The load pressure across positive displacement acceleration. The technique involves feeding back load differential pressure, sensed by pressure transducers, though a simple analog compensatory circuit (high pass filter). The effectiveness of the damping is determined by the filter time donstant and loop gain. Nonlinear total hydraulic simulation results verify the possibility of linear model predictions of extending the closed loop bandwidth beyond the uncompensated frequency.

  • PDF

이족보행 로봇의 무게중심 실시간 추정에 관한 연구 (On the Estimation of the Center of Mass of an Autonomous Bipedal Robot)

  • 권상주;오용환
    • 제어로봇시스템학회논문지
    • /
    • 제14권9호
    • /
    • pp.886-892
    • /
    • 2008
  • In this paper, a closed-loop observer to extract the center of mass (CoM) of a bipedal robot is suggested. Comparing with the simple conversion method of just using joint angle measurements, it enables to get more reliable estimates by fusing both joint angle measurements and F/T sensor outputs at ankle joints. First, a nonlinear-type observer is constructed to estimate the flexible rotational motion of the biped in the extended Kalman filter framework. It adopts the flexible inverted pendulum model which is appropriate to address the flexible motion of bipeds, specifically in the single support phase. The predicted estimates of CoM in terms of the flexible motion observer are combined with measurements (that is, output of the CoM conversion equation with joint angles). Then, we have final CoM estimates depending on the weighting values which penalize the flexible motion model and the CoM conversion equation. Simulation results show the effectiveness of the proposed algorithm.

Multifunctional Uninterruptible Power Supply (UPS) System

  • Kim, Je-Hong;Choi, Yong-Joon;Choi, Jae-Ho
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
    • /
    • pp.813-817
    • /
    • 1998
  • This paper proposes a new control strategy of bidirectional uninterruptible power supply(UPS) with the performance of active power filter which compensate the harmonics and reactive power. To improve the transient response for the effective compensation in active power filter mode. It is considered that a simple and precise calculation method of the compensation reference current for the harmonics and reactive power compensation. So a novel closed-loop control strategy is used to calculate the reference current. The system model and control algorithm are described and the system performance is verified by the simulation and experimental results.

  • PDF

EEG를 이용한 마인드 스위치 제작 (A Mind Switch using EEG)

  • 안순관;전상범;김성준
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1998년도 추계학술대회
    • /
    • pp.211-212
    • /
    • 1998
  • In this experiment, we developed a mind switching device which uses $\alpha$-wave with its amplitude varying between the eye-open and closed states. If the subject closes eyes, the switch toggles with a small delay. The circuit consists of an amplifier, a filter and a switch. An instrument amplifier is used fur high CMRR and for high input impedance. An 8th order Butterworth filter was able to reduce noise satisfactorily. The signal is then converted to a DC level, and finally a Schmitt trigger was used to generate a switching pulse.

  • PDF

Sorbent Thermal Desorption/Gas Chromatography/Mass Selective Detection Method for Determination of Gaseous Polycyclic Aromatic Hydrocarbons in Indoor Air

  • Dai, Shugui;Zhang, Lin;Zhu, Tan
    • 분석과학
    • /
    • 제8권4호
    • /
    • pp.753-758
    • /
    • 1995
  • Thermal desorption/gas chromatography/mass selective detection method using Tenax cartridges for the determination of gaseous polycyclic aromatic hydrocarbons(PAH) is described. Glass fiber filter can collect only PAH in particulate. Gaseous PAH may penetrate the filter. Glass cartridge packed Tenax-GC was uses fur adsorption of gaseous PAH. The air of inhalation zone was collected fur 2-10 hours. Cartridges were thermally desorbed in the reverse direction to sample flow. The desorption conditions were as follows; desorption temperature; $300^{\circ}C$; desorption time; 20min; column head pressure; 30psi; inlet split vent; closed during desorption.

  • PDF